pressure: 110 t : Ø 40x20 mm throat: 500 mm engine output: 9 kW no. of strokes: 28 Hub/min stroke max.: 80 mm weight: 3150 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• más información

Capacidad de cizallamiento: 40 mmCapacidad de centrifugado: 0 mmCapacidad de pinza: 0 t Marca: GEKA Tipo: Hydracrop 80 SD YOP: 2010 Herramientas de paquete grande 5 Estaciones de trabajo 2 Interruptores de pie Carrera ajustable:     70mm Fuerza de punzonado:        80T Capacidad x grosor: 40 x 20 mm Fuerza de corte:         150T Garganta:                500mm Capacidad perfil L:    130 x 130 x 13 mm Potencia:                 9kW Longitud:                2.200 mm  Ancho:   ...

 ...

• más información

: neu : ca. 8 Wochen ab Auftragse : Spanien : 170 to : 40x40x4 mm : 65x65x7 mm : 2 : 25/5 bzw- 18/7 mm : 350 to : 5 kW : 265 bar : 70 l Automatic line for punching and sharing angle STANDARD EQUIPMENT: INFEED/OUTFEED CONVEYERS idle rollers 3 conveyers each 3,3 m for feeding angles up to 12 m length WORKING UNITS: ROLLER FEED MEASURING SYSTEM feed by roller wheel (brushless moto),rotary encoder no time loss for measuring feeding speed variablefrom 0 to 36 m/min positioning accuracy in X axis0,25 mm + 0,15 mm per meter the last 250 mm can not be used PUNCHING UNIT (2X) 1 punching unit per leg 1 punch per punching unit adjustable back mark by tooling fromfrom 20-40 mm hydraulic downholder direc ...

: 28 min. Punching force: 110 to : 40x20 mm flat steel: 600x15 oder 400x20 mm L-beam 90°: 160x160x16 mm L-beam 45°: 70x70x7 mm : 50 mm square edge steel: 50 mm : 13 mm throat: 300 mm Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software s ...

flat steel: 350 x 10 mm round bar steel: 35 mm square edge steel: 30 mm L-beam: 80x80x8 mm hole diameter in sheet thickness: Ø 27 in 13 bzw. Ø 20 in 8 mm : 500 kN throat: 177 mm : 34 (Hub 15mm) blade length: 356 mm engine output: 3.0 kW weight: 950 kg dimensions: 1300x1100x1850 mm Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTe ...

stroke: 70 mm work height max.: 1094 mm throat: 500 mm : 40 in 14 mm no. of strokes: 20 Hub/min throat: 500 mm : 80 to engine output: 9 kW range L-W-H: 1980x1150x2000 mm weight: 2000 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 500 mm stroke: 60 mm : 38 /min. engine output: 5 kW weight of the machine ca.: 1.150 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /min Punching force: 60 to throat: 500 mm : 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: 2012 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /min Punching force: 60 to throat: 250 mm : bis max. Ø 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: ca. 1600 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.