| Die and Mold Package linear incl.
B-/C-Torque |
Die and Mold Package linear incl.
B-/C-Torque Dynamic package V-type Eagle timing belt for Z axis Torque
table B-/C-axis including ATC AVD - Heidenhain or MVC - Heidenhain
(starting NC 340590 11) APC and Top Speed - Siemens High End cooling
unit for machi |
| Spindle speed 20.000 rpm, HSK-A63 |
Motor spindle speedMASTER® HSK-A63 Spindle speed
20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm /
86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| Chain-type tool magazine 60 pockets |
Tool magazine with 60 positions, chain type with
double gripper (differently from standard) |
| Pneumatic set up station for tool
loading |
Pneumatic set up station for tool loading |
| Direct measuring system |
Direct path measuring system |
| Cabine |
Full protection cabin |
| Version Rotary joint, torque table,
TK57 |
Rotary joint version Torque table TK57 4 channels,
pneumatic On a pitch point of 57 mm Positioning according to Seebach
standard media connection in the middle of the table |
| 3D Quick SET |
3D quickSET Tool kit for control and compensation
of the cinematic accuracy of 5 axis machine configurations (only with
option touch probe) |
| Tool breakage control mechanical |
Tool breakage control mechanical version Touch
when changing into the magazine checkable tool length 60 to 300
mm |
| Laser tool measuring DIGILOG,
swiveling |
Laser tool measuring BLUM DIGILOG measuring of
tool length and diameter, automatically turn away of the measuring
unit under table level including Calibration tool |
| Signal lamp 4-colour |
Signal lamp, 4 colours |
| Internal coolant supply 40bar/980l |
Internal coolant supply (ICS) paper type filter,
40 bar /23 l/min / 980 l tank, 580 psi/6 gallon/min /258.9 gallon, air
purge for linear measuring system, bed flushing double cartridge
filter 50µm for internal coolant |
| Standard Automation Interface |
Automation interface according to DECKEL MAHO
Standard consisting of: Interface (Profibus) via M65; Automatic
loading door; Working table with 4-channel rotary D4552871
joint; |
| Safety glass at operators door |
Laminated safety glass at the operators door,
side glass polycarbonate preferably for combination with automation
cabin |
| Exhibition design eVo |
Exhibition design DMU eVo chiller of electrical
cabinet painted in electrical cabinet color; lighting of tool
magazine; DMG-MORI set of labels; door media supply; paper version of
electrical plan |
| Air blast through spindle centre |
Air blast through spindle centre selection with M
function maintained air (1 Drop Oil per 8min) (in combination with ICS
possible) |
| Sensor package i4.0 |
Sensor package i4.0: SGS Spindle Growth Sensor ICS
flow sensor |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area.
Release after check list has been filled in. |
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Messenger V4 |
The latest version of DMG MORI Messenger displays
web based the machine live status. It allows to analyze the machine
run-time, downtime, alarms in individually configurable dashboards
and transparently shows the actual status in the manufacturing
shop |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |
| Special equipment |
Pneumatic control EROWA zero-point clamping system
Two active pneumatic lines Pneumatic release via system pressure 6 bar
(Control of other clamping systems only in consultation with Technical
Sales!) Oil mist separator ASF 1100 |