Longitud de la mesa: 12000 mmAnchura de la mesa: 4770 mm X longitudinal: 12000 mmCross Y: 5300 mmVvertical: 4000 mmPosiciones ATC: 0 Distancia entre montantes: 5000 mmCNC Marca: SiemensCNC Modelo: 840 D  ...

• más información

WALDRICH SIEGEN HFB-200 CNC Horizontal Boring & Mill MC Año de construcción 1978 / 2007 X=15.000, Y=5.000, Z=1.500, W=1.200mm Diámetro del husillo 200mm ISO 50+60, 90kW SIEMENS 840 D ATC 90 Tabla 5.200x5.200mm, X recorrido 3.300mm máx. carga 100 Ton Rotación 360.000 Placas de suelo 6.000 x 10.000mm Hidrostático Muchas cabezas Esta máquina se utilizó en el corte final y el mandrinado, la perforación de grandes bloques de cilindros del motor del buque en el motor STX. Se puede hacer la perforación y perforación en dirección recta e inclinada. Significa que la cabeza del husillo se puede inclinar. Es una máquina de muy alta precisión. Esta máquina está en c ...

Eroding diameter: 100-420mm, max. roll length: 2500mm, roll weight: 8t, eroding length: 11mm, number of electrodes: 60, length: 5000mm, width: 2000mm, height: 1200mm, weight: 25t, with documentation, inspection is possible. ...

• más información

turning diameter over bed: 2000 mm turning diameter over slide rest: 1600 mm turning length: 22.000 mm turning diameter: 2000 mm turning length: 20.500 mm control: SIEMENS SINUMERIK 840 D workpiece weight: 70.000 KG total power requirement: Hauptmotor 110 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Datos técnicos: longitud máxima de molienda: 4300 mm diámetro máximo de molienda: 800 mm Dimensión de la rueda de molienda: 700x70x305 mm peso máximo de la pieza de trabajo: 10 a. Velocidad del husillo de molienda: 650-1300 rpm  ...

• más información

Waldrich Siegen brand X = 8000, Y = 1800, Z = 1800mm. Our 6-axis double column machine, including Q, W, V, has a Siemens 840C CNC unit and it is active. It was imported to our company from France in 2014 and was used very little in our country. The bench has both a vertical and a side working head and an angle head that can be attached manually separately.

x-travel: 14.000 mm y-travel: 4.480 mm z-travel: 3.000 mm w-travel: 300 mm table:: table load: 145 t table width: 3.100 mm table length: 14.770 mm Passage height: 3.800 mm max. passage: 3.200 mm diameter of quill: 305 mm spindle turning speed range: max. 600 U/min rapid travel x/y/z: 6 / 6 / 12 m/min output: 100 kW control: SIEMENS 840 D Powerline quill:: ISO 60 electrics - voltage/frequency: 380/50 V/Hz weight of the machine ca.: t dimensions of the machine ca.: m table guiding: hydrostatic redesigned hydrostatics calculated to a maximum load of 450 tons orthogonal milling head ISO 60 angular milling head ISO 60 The data for this ad was created with ModulMWS - the software solution of Lo ...

x-travel: 13.000 mm y-travel: 2.500 mm z-travel: 2.250 mm w-travel: 360 mm table:: double table: 12.500 mm table load: 50 t table width: 2.400 mm bed length: ca 26.000 mm Passage height: 2.250 mm milling height: 2.000 mm max. passage: 2.750 mm diameter of quill: 130 mm spindle turning speed range: U/min transmission ratio: drive capacity - spindle motor: kW spindle taper: dia. of quill: 280 mm quill:: ISO 50 rapid travel x/y/z: 8 / 1,5 / 3 m/min electrics - voltage/frequency: 380/50 V/Hz weight of the machine ca.: t dimensions of the machine ca.: m table guidance: hydrostatic universal angular head 37 kW angular milling head 37 kW angular milling head 56 kW The data for this ad was crea ...

turning diameter over bed: 3000 mm turning diameter over slide rest: 2650 mm turning length: 19000 mm Control: Siemens type: 840 C mm faceplate: 2500 mm turning speeds: 0,65-99,2 U/min Rest: 2 steady: 2400 mm steady: 900 mm steady: 900 mm steady: 500 mm main drive motor: 180 kW workpiece weight: 100 t chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

garganta: 760 mm brida:: 500x500 mm Acerdo del cabezal de clavo: 230x170 mm eparador de herramientas: nach DIN cargo de potencia: kW cargo de potencia total: kW peso de la máquina ca.: t dimensiones de la máquina ca.: m  ...

• más información