284 DMG MORI 出售二手机械设备

这款五轴 DMG MORI DMU 65 单块发动机于2011年制造。其X、Y、Z行程分别为735毫米 、650毫米和560毫米，主轴转速为18,000转/分钟。该机配 备了一个有30个弹匣位置的工具更换器，并采用Heidenha in iTNC 530控制型。如果您希望获得高质量的加工能力，可以� ��虑我们出售的 DMG MORI DMU 65 单块立式加工中心。如需更多信息，请联系我们�

这款三轴 DMG MORI CMX 1100 V 于2020年制造。其X轴行程为1100毫米，Y轴行程为560毫米 ，Z轴行程为510毫米。该机具夹持面积为1400 x 560毫米，最大工作台载重为1000公斤。如果您想获得高 质量的加工能力，可以考虑我们出售的DMG MORI CMX 1100伏垂直加工中心。如需更多信息，请联系我们�

这款8轴DMG MORI Sprint 65线性机型于2015年制造。其最大工件直径为175毫米，� ��大钢筋直径为65毫米。该机配备了两个转塔，每个转 塔有12个驱动刀具位置，最大主轴转速为5000转/分钟。 如果您希望获得高质量的车削能力，可以考虑我们正� ��出售的DMG MORI Sprint 65线性多主轴车削机。如需更多信息，请联系我们�

该机器技术状况良好，经过事先协议后可以进行测试� ��配备西门子Shopturn系统，包括送料器，机器设备齐全 。基本参数 最大工作空间 转弯空间：≈ 410–500 毫米 最大长度：800 毫米 主轴间距：约 1020 毫米 床盘上方摆动直径：~700 毫米 实际：理想尺寸适用于轴、法兰、车身，直径可达 ~800 毫米 行程（轴）X：~480 毫米 Y：？？100毫米Z轴：+800–845毫米 B轴：？？110（五轴加工）C轴：360？？（定位+插值）� ��使其成为一台完整的车削铣床（非经典车床） 主轴主轴转速：~5000转/分钟 功率：~25–34千瓦 通行量：约76–87毫米 反主轴转速：~6000转/分钟 铣削主轴（与经典车床的主要区别）转速：最高12,000 – 20,000转/分钟，功率：~19–22千瓦 锥度：HSK-A63或Capto C6允许： 铣削、钻孔、攻牙� ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with Siemens SINUMERIK ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minNC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationTool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)Tool magazine 60 pocketsTool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loadingChip removal package with cabin roofSwarf removal package chip conveyor Coolant - air-blast changeover Swarf con ...

CNC车床 DMG MORI NLX 2500 SY/700 配备DMG MORI M730 UM MAPPS CELOS控制器 制造年份：2017年10月 投产时间：2018年1月 转弯直径：356毫米 X轴行程：260毫米 Z轴行程：795毫米 行程在Y轴：+- 50毫米 主轴孔径：91毫米 主主轴转速范围：4000转/分钟 副主轴转速范围：4500转/分钟 驱动工具转速范围：10000转/分钟 配上以下配件： 带室内照明的工作室门 20折炮塔，配备20个驱动车位 C轴，Y轴 触探针（Marposs） 副主轴，部件捕捉器 工件输送机，工件卸载机 刀具预置器手册（HS） 可移动工具预置器（GS） 3颚凸轮液压北川BB 210带脚踏板（HS） 三口夹头液压 Kitagawa B 208 带脚踏（GS） IRCO 布鲁宁 ILS Bar Feeder - muk 各种刀具夹具 0 40 毫米 直接位移测量系统X、Y、Z轴 信号灯 4 种颜色 碎屑输� ...

A horizontal CNC 5-axis universal machining center from DMG Mori is available. Travel X/Y/Z: 650mm/950mm/700mm, max. rotary table load: 600kg, spindle speed: 15000rpm, tool interface: HSK-A63, power: 21kW/16kW, torque: 111Nm/85Nm, tool positions: 123, coolant tank capacity: 1300l, tool clamping force: 25kN, interference circle diameter: 630mm, max. workpiece height: 700mm, feed rate: 60m/min, rapid traverse: 60m/min, position measuring system resolution: 10nm, accuracy: 0.006mm, operating hours: 6490h. Including Renishaw infrared touch probe and Blum tool measurement. Documentation available. An on-site inspection is possible.

DMG Mori 四轴数控加工中心可供选择。X/Y/Z轴行程：730mm/730mm/88 0mm，主轴转速：20000rpm，快速横转：60m/min，进给速率� ��60m/min，进给力：10kN，刀具接口：HSK-A63，托盘数：2� ��最大工件重量：500kg，刀具位置：40，控制：西门子S inumerik 840D SL。可操作，通电时间：14948小时，操作时间：5251小� �。包括碎屑输送机、托盘更换器和冷却液罐。文档可 查。现场检查是可能的�

A DMG MORI CNC 4-axis machining center is available. X/Y/Z-axis travel: 730mm/730mm/880mm, spindle speed: 15000rpm, torque: 250Nm/104Nm, tool interface: HSK-A63, spindle-to-table distance: 80mm-810mm, spindle nose-to-table distance: 70mm-950mm, pallets: 2, pallet dimensions X/Y: 500mm/500mm, max. workpiece weight: 700kg, max. workpiece diameter: 800mm, max. workpiece height: 1000mm, tool positions: 60, rapid traverse: 60m/min, feed rate: 60m/min. Machine dimensions X/Y/Z: approx. 6000mm/4000mm/2700mm, weight: approx. 12000kg, control: Siemens Sinumerik 840D sl, power-on hours: 33184h, operating hours: 10601h. Including 70bar internal coolant supply and Knoll KF 110/700. Documentation available. An on-site inspection is possible.

Machine No.: 10990003463 Control System Heidenhain iTNC 530 (3D path control) Travel Paths X: 1,850 mm Y: 2,000 mm Z: 1,100 mm B-axis: controlled universal swivel milling head C-axis: NC rotary table Ø 1,700 mm 5-axis simultaneous machining Spindle Motor spindle SK50 Speed: 25–12,000 rpm Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle) Torque: 288 / 187 Nm Tool holder: SK50 according to DIN 69871 Tool Changer 60-slot tool magazine Double gripper Equipment IKZ 40 bar Chip conveyor Tool measurement system Blum Laser NT Hybrid Heidenhain TS 640 infrared probe Electronic handwheel Minimum quantity lubrication (MQL) Oil/emulsion mist separator Coolant through spindle Coolant tank 980 l ATC (Application Tuning Cycle) Laminated safety glass window Operating mode 4 (process observation)

GeneralHorizontal Machining Centre in travelling column construction; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal630 mmCross800 mmVertical850 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)Main driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range -12000 rpmSpindle taper HSK-A 63CabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet changerTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis ...

General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min, - USB-interface, Ethernet-interface; Control: CELOS X with Siemens 840D SL Operate Working areaSwing diameter over guide ways700 mmTurning diameter700 mmDistance between spindles3360 mmClamping chuck diameter max.630 mmBar diameter max.125 mmMain drive 1Drive power (100% DC)40 kWDrive power (40% DC)52 kWSpeed range- 2500 rpmMax. torque (40% DC)2200 NmTorque (100% DC)1700 NmC-Axis Speed2500 rpmTorque of C-Axis (holding torque)1700 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 698 ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinChip removalChip removal: manual, from the chip troughCoolant supplyCoolant supply: Multi-jet strip at spindle head, switchable from coolant to air (max. 6 bar / 90 psi, 6 water jets, 6 air jets) Pump capacity: 70 l/min / 18 gallon/min (theoretical pump performanc ...

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z42000/42000/42000 mm/minRapid feed X / Y / Z42/42/42 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftDynamic package for DMF 300|11 linearDynamic package for DMF 300|11 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motorToolchanger with twin-grippertoolchanger with twin-gripperType of magazine ChainNumber of tools 40CabineFull protection cabinPackage Mill / Turn 20,000 rpm, H ...

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 780 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360 x 0,00 ...

DMG MORI CTX beta 1250 TC 4AYear of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mmTurning length : 1185 mm____________Description:In General:Year of manufacture:2014Control system:Siemens 840 Dsl - OperateSwivel diameter:540 mmTurning length:1,185 mmBar capacity:67 mmMain spindle:Technology:Direct drive spindleSpeed:5,000 rpmPower:32 kWTorque:360 NmBar capacity:67 mmC-axis:0.001°Chuck:Hainbuch Spanntop Axfix 65Hydraulic clamping:Differential pressure clampingClamping cylinder:Hollow clamping cylinderCoolant supply:External (chuck flushing)Sub spindde:Technology:Direct drive spindleSpeed:5,000 rpmPower:32 kWTorque:360 NmC-axis:0.001°Chuck:Hainbuch Spanntop AxfixHydraulic clamping:Differential pressure clampingCoolant supply:External and internalTailstock function:Mechatronic control of the sub spindleTool carrier I (X/Y/Z/B):Technology:Milling spindle on  ...

A CNC vertical milling machine DMG in need of repair is available. Travel X/Y/Z: 750mm/600mm/520mm, table diameter: 700mm, swivel B: -5°/110°, max. workpiece diameter: 800mm, max. workpiece height: 590mm, max. workpiece weight: 350kg, tool holder: SK40, speed: 14000rpm, tool positions: 30, rapid traverse: 24m/min, feed: 20m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.006mm. Machine dimensions X/Y/Z: approx. 5600mm/5000mm/3000mm, weight: approx. 6000kg, control: Heidenhain iTNC530 3D, operating hours: approx. 62250h, spindle hours: approx. 15550h. The geometry of the machine must be checked and it shows deviations in the axes, including the rotary axis. Documentation available. An on-site inspection is possible.

A vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, table dimensions X/Y: 1000mm/560mm, max. table load: 800kg, tool holder: SK40, spindle speed: 10000rpm, tool stations: 30, rapid traverse: 30m/min, positioning accuracy: +/-0.008mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 3700mm/2450mm/2750mm, weight: approx. 4100kg, control: Heidenhain iTNC530, operating hours: approx. 16000h, spindle hours: approx. 8000h. Including chip cart, chip conveyor and belt filter. Documentation available. An on-site inspection is possible.

这款8轴DMG MORI Sprint 65线性机型于2015年制造。其最大主主轴转速为5000转/� �钟，最大主轴直径为65毫米。该机车配备两个转塔，� ��个转塔可操作12个驱动刀具位置，冷却罐容量为650升 ，非常坚固。如果您希望获得高质量的车削能力，可� ��考虑我们正在出售的DMG MORI Sprint 65线性多主轴车削机。如需更多信息，请联系我们�

DMG MORI Kühlmittelanlage 980 l |40-80巴 制造年份：2018 控制：Sonstige ____________Description：一般：制造商：DMG（比伦机械厂� � 制造年份：2018 泵总数：5台 高压泵：2台（40和80巴） 过滤器：纸带式过滤器 罐容量：约980�

DMG MORI DMF 260 | 11Year of manuf. : 2022 Control : Siemens 840 DSL - Celos Speed : 20000 rpmMovement X/Y/Z : 2600/1100/900 mmTool holder : SK 40 ____________Description:In General:Year of manufacture:2022Control system:Siemens 840 Dsl - CelosTravel ranges X/Y/Z:2,600/1,100/900 mmSpindle speed:20,000 rpmTool holder:SK 40Spindle:Technology:Direct drive spindleSpeed:20,000 rpmMax. power:35 kWMax. torque:120 NmTool holder:SK 40NC swivel head:Technology:Swivel axis (B-axis)Travel range:+/- 100°Work table:Technology:Fixed table with integrated NC rotary tableTotal clamping area:3,200 x 1,100 mmTotal table load capacity:4,000 kg/mClamping area of NC rotary table:1,050 mmMax. table load capacity of NC rotary table:1,200 kg/mC-axis:360°Tool magazin:Technology:Chain magazineNumber of stations:120Tool changer:Double gripper with ATC shuttleMax. tool diameter:130 mmMax. tool length:300 mmE ...

这款五轴 DMG MORI DMU 75 单块发动机于2017年制造。它配备了西门子SINUMERIK 840 D控制系统和一个20巴高压冷却液泵。该机器配备了来� ��海登海因的3D测量探针，拥有60个弹匣位置。如果您� ��望获得高质量的加工能力，可以考虑我们正在出售� � DMG MORI DMU 75 单块通用加工中心。如需更多信息，请联系我们�