碳酸软饮料PET瓶装满系列 制造商：SIPA / PROCOMAC 制造年份：2009年 地点：德国 供应时间：自2026年10月起 该线路目前仍在运行，生产过程中可进行检查。 技术细节： 容量：约每小时12,500瓶 瓶装容量：500毫升、750毫升、1500毫升 琴颈处理： PCO 28 / 1881 额外750毫升，带运动帽（PCO 1881） 包括： 1. 8腔SIPA SFR 8吹气机 包括预备食品供给系统 包括冷水机，但无预制卸载装置 无高压压缩机 2. 气流输送机GEA Procomac 3. Tribloc GEA Procomac 50 / 70 / 12 配备50个冲洗站、70个加水阀和12个加水头 塑料螺丝盖 包括围绕机器类型的完整克莱恩房间 ISO 5”， 包括两个分拣单元， 包括填充后瓶子干燥站， 包括填充高度控制和填充后盖控制， 包括氮加量系统（适用于无二氧化碳产 ...
quality: div. Packing: div. m Shipping weight: div. kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Sommer, 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless ...
Hydraulic filter, filter element, oil filter, filter cartridge, hydraulic oil filter, fuel filter, screw-on filter -Filter elements: hydraulic oil filter, fuel filter 157 pieces -Type: Different types from different manufacturers -Price/tax: complete -Transport dimensions: 1200/800/H500 mm -Total weight: 162 kg
Hydraulic filter, filter element, oil filter, filter cartridge, hydraulic oil filter, fuel filter, spin-on filter -Condition: Original packaging, unused, very good -Filter elements: Hydraulic oil filter, fuel filter 540 pieces -Type: various types from different manufacturers -Price/Fee: complete -Transport dimensions: 1200/800/H800 mm -Total weight: 291 kg
Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type ML667) - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system), Additional title: hot filling, with pasteurisation, Capacity: 5000 bo/h, Formats: 0.25 liter bottles, twist off caps, Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler
Reusable bottle line for filling beverages into 0.5 l and 0.33 l glass bottles. The filling line comprises the following components: - Uncorker (Rink, 1995) with 2 uncorking heads - Unpacker (Albert Frey) with 2 unpacking heads - Crate washer (Göbel, 1971) for cleaning using spray nozzles - Bottle washing machine (GM Gera, 2007), single-end machine - Empty bottle inspector (Krones, 2016) for checking the base, side walls, neck and residual liquid - Glass bottle filler and capper (Krones, 2002), short-tube counter-pressure filler with 40 filling valves and capper for crown caps - Labelling machine (Krones, 1995) for wet glue labelling - Date coding (Domino, approx. 2010 – 2017), inkjet printer - Fill level, label and cap inspector (Syscona, 1997 – 2008) - Packer (Albert Frey, 2002) with two packing heads - Palletising system (ABB, 2014) with articulated arm robot - Conveyor belt syst ...
Keg cleaning, filling and palletising system, consisting of the following components: - Keg external washer Schöttinger & Schäfer, year of manufacture 1987 Model: AW 2RB - Keg filling system Leifeld & Lemke, Year of manufacture: 1988 Consisting of: 1 line for pre-cleaning, KVR 1, Capacity: 140 kegs/hour 2 lines for main cleaning and filling, KRF1 and KRF 2 Capacity: 120 kegs/hour - CIP system with 5 containers Year of manufacture: 1988 - Palletising and depalletising RST Year of manufacture: 1999 with pallet magazine and palletising robot (KUKA KR 125/1), Additional title: Keg cleaning and filling system with palletising; built 1987 - 1999, Capacity appr.: 120 Kegs/h, Operation / Control: Simatic S7-300, Features: External washer; pre-cleaning, main cleaning and filling lines; CIP system; palletising with pallet magazine and robot
Brewing plant with a mash-out wort volume of 20 hl, comprising the following components: 1. Malting plant (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hopper, floor scale, malt conveyor and control cabinet 2. 3-vessel compact brewhouse with insulated stainless steel vessels with copper lids, spindle station and control cabinet 3. Fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tanks (Joh. Albrecht, 1999, 44 hl, 0.99 bar) and 6 x storage tanks (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4. Pressure tank cellar with 2 x pressure tanks (Speidel, 2021, 86 hl, 3 bar) and 1 x pressure tank (INOX, 2018, 67 hl, 3 bar). All tanks with jacket cooling. 5. Keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17–20 kegs/h) 6. Refrigeration system acting as an ...
Bottling line for approx. 5000 bottles/h, Additional title: returnable glass bottle filling, years of construction 1990 - 2016, Capacity: 5000 bo/h, Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l, Position: free standing, Features: Unpacker (JOHA Diamant M1), bottle washer (Klinger, 2016, 7,000 bph, empty bottle inspector (Heuft Reflexx InLine IR, 2016, 8,000 bph) bottle filler and capper (Hormes), swing-top capper (AMS, 1997, 15 capping units, 6,000 bph) Labelling machine (Gernep, 2014, 9000 bph), packer (JOHA Diamant M1), crate washer, caustic settling tank
数量 1 二手炊具生产厂 由3座工厂组成： 铝盘和铝板生产工厂——仍在运营 不粘铝炊具生产工厂——目前仅有一台机器仍在运行 不锈钢炊具生产工厂——2026年1月停止运营 土地面积：30,000平方米，覆盖面积为：22,000平方米 光伏板投资 PV面板数量：4800个。 电池板发电能力：2兆瓦
二手
罐装管线 可安装330毫升和500毫升罐装 容量：6,000罐/小时，含330毫升罐装 包装：3x4或4x6罐装在托盘上，锡箔包覆 收缩膜 基本包括： 1. 卸料器 TMG Impianti 2. 碳酸机商市，制造年份：2007 3. 填充与密封联合收割机 MCD 类型：16/4 同样由中国商飞制造，制造年份：2007年 4. 隧道巴氏杀菌机Comac，包奥尔：2007年 5. 托盘搭建机、托盘包装机、薄膜包装机 迪马克星一型 该设施目前已完全建成，状况极佳。它与相关的控制 置和输送带一起销售（见附图布局）。如有需要， 以参观
提供多种尺寸和颜色的塑料烘焙篮/运输箱托盘，质量 稳定且专业。理想用途，例如面包店、仓库、物流、 业厨房、食品生产、餐饮和餐饮。 共有126个托盘，约8000个箱子，全部通过托盘交付。 尺寸与价格： 60 x 40 x 16：每盒净价2.50欧元 5托盘 = 240件 = 每托盘48箱 = 每托盘净价€120 21托盘 = 2,016件 = 每个托盘96箱 = 每托盘净价240.00欧元 60 x 40 x 8：每盒净价2.50欧元 1托盘 = 80件 = 每托盘净价€200.00 1托盘 = 50件 = 每托盘净价€125.00 80 x 40 x 10：每盒净价2.50欧元 77托盘 = 4,620件 = 每个托盘60箱 = 每托盘净价150欧元 1托盘 = 35件 = 每托盘净价87.50欧元 80 x 40 x 15：每盒净价2.50欧元 19托盘 = 988件 = 每托盘52箱 = 每托盘净价€130.00 1托盘 = 30件 = 每托盘净75欧元 在购买大量 ...
提供多种不锈钢架推车/烘焙托盘推车（无托盘），采 用稳定的工业设计，非常适合面包房、商业厨房、食 生产、餐饮和餐饮。 16辆尺寸为100x80厘米的手推车 = 每件净价€160.00 10件，尺寸为80x60厘米=每件净价€155.00 版本（无纸）： - 不锈钢 - 带滑轮的移动式 - 高托盘插入容量（适合60×40个烘焙托盘） - 烘焙生产的专业质量 状况： 使用过，功能齐全，但有生产厂常见的磨损迹象。 这些车目前在Pasewalk的客户手中，因重组正在出售。 只有所提供的资产被明确出售，照片中能看到的任何 品都明确不在要约范围内。 我们代表客户出售资产。报价价格为欧元净价。由于 些是二手资产，我们出售时不提供保证、保修，也 享有回收权。优惠可能会变动、 ...
包装线，由以下工厂组成部分： - GEA制造商的热成型机，型号PowerPak RT500，含附件和备用工具（制造年份约2015年） 该系统以10次/分钟的输出速度将产品杯拉入50毫米深 因此每分钟可吸120包。GEA的一些运输轨道仍然存在。 - Alpma制造商的插入机器人，ER 10型，带集成检查桥（约2019年制造） 插入机器人配备了自己的真空泵 - 制造商DVC的漏水监测系统（约2019年制造年份） 技术规格 自动重重器/实秤重器 制造商：Minebea Intec 类型：EWK 型号：FLEXUS 10/WS 2公斤 WZG-0CE 制造年份：2018年 最大包裹数/分钟：128 最大皮带速度：0.791 m/s 气压：300 kPa 温度限制：5 - 40摄氏度 连接负载：230伏，50赫兹，500VA 电磁环境类别：E2 最大重量/分钟：152.0 克 / 72.0 克 目前，该包装线 ...
Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon bolts: M 20 700 kg -Sizes/number: M16 x 30 to M16 x 130, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 627 kg
Edge banding, edge trimming. Veneer roll -Edge tape: edge banding approx. 62 rolls -Type: various designs, see photos -Price/Sale: complete -Dimensions: 1120/630/H900 mm -Weight: 277 kg
Screws, hexagon screws, flange nuts, hex nuts, collar nuts -Hex nuts: M8 to M30 645 kg -Sizes/Quantity: see photo parts list Price: complete Total weight: 645 kg
Bolts, hex bolts, flange nuts, hex nuts, collar nuts, washers, washers -Washers: Washers, various sizes 276 kg -Sizes/number: Ø10.5 to Ø31.5 mm see photo parts list -Price: complete -Total weight: 276 kg
Hydraulic filter, filter element, oil filter, filter cartridge, hydraulic oil filter, fuel filter, screw-on filter -Filter elements: hydraulic oil filter, fuel filter 478 pcs. -Type: Different types from different manufacturers -Price/tax: complete -Transport dimensions: 1200/800/H780 mm -Total weight: 236 kg
Hydraulic filter, filter element, oil filter, filter cartridge, hydraulic oil filter, fuel filter, spin-on filter -Filter elements: Hydraulic oil filter, fuel filter 485 pieces -Type: Various types from different manufacturers -Price/Sale: complete -Transport dimensions: 1200/800/H780 mm -Total weight: 291 kg
Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Wood Screws: Hex Head Wood Screws -Quality: DIN 571 galvanized steel -Sizes/number: M10 x 40 2080 pcs / M8 x 60 800 pcs -Manufacturer: Reyher/Diverse -Price: complete -Total weight: approx. 80 kg
Drill bits, twist drills, drill bits -Manufacturer: Maysso / Ilix, twist drill 4 pieces Ø 24 - 26.5 mm -Type: double cutter, MK3 mounts -Size: 1x Ø 24/25.5/26/26.5 mm each -Price/tax: complete -on request: different sizes/quantities available from additional stock -Transport dimensions: 290/100/H30 mm -Weight: 2.5 kg
Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Mill holders: SK50 23 pieces with tool holder and accessories -Type: various designs, see photos -Price/delivery: complete -Total dimensions: 600/600/H770 mm -Weight: 152.5 kg
