锯床 二手 出售 (1,230)

With widening.braked. Auction-ID: A1-44639-6

Auction-ID: A1-44639-27

dimensions of saw-band: 3650x27x0,9 mmspeed: 15/100 m/mincapacity 90 degrees: round: 280 mmcapacity 90 degrees: square: 260 mmcapacity 90 degrees: flat: 330x260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270x200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmcapacity 60 degrees: flat: 170x170 mmtotal power requirement: 2,2 kWweight: 1240 kgvice: 340 mmdimensions: 2020x2040x1740 mmControl: Electro-hydraulic fully automatic band saw with additional, semi-automaticFunction, for cuts from 0 ° to 60 ° left.Compact machine with the new Windows CE based MEP-50 controllerand 7 touch-screen display for managing all machine parameters.Easy operation and control of all cutting parameters in real time.Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings,Single stroke 600 mm - rep ...

1. General information Machine type: KASTO SSB 260 VA Version: Fully automatic Saw blade tension: hydraulic, factory adjusted 2. Cutting Areas Cutting range round: 260 mm Square cutting range: 260 × 260 mm Smallest dimension to be sawn: 10 mm Smallest section length: 5 mm 3. Feed system Automatic feed length (single): 600 mm Multiple feed length: 1,800 mm Minimum off-piece length single cut: 75 mm Automatic operation: 115 mm Cutting speed: infinitely variable Range: 15 – 125 m/min Cutting feed: infinitely variable Material feed: hydraulic Automatic feed with horizontal vise Material tension: hydraulic, infinitely variable Clamping forces: Horizontal vise Sp I: 0 – 800 daN Feed vice Sp II: 0 – 800 daN 4. Saw Blade Saw blade dimensions: 4,115 × 32 × 1.1 mm Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: thanks to easily replace ...

Combi saw circle and crosscut. Auction-ID: A1-44639-58

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 46400 €: 886.24 €: Doppelsäulenführung : 6800x41x1,3 mm: 20-100 m/min: 560 mm: 820 x 540 mm: rechteck 550 x 540 mm : rechteck 360 x 540 mm : rechteck 550 x 540 mm : 880 mm: 1.1 kW: 4 kW: 0.12 kW: 3800 mm: 1750 mm: 2350 mm: 3200 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmentHYDRAULIC UPLIFT OF SAWING FRAMEuser manual in GERMAN or ENGLISH(roller table see photo - optional available, additional price ...

Auction-ID: A1-44639-28

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-44803-216

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-44802-121

: neu : ca. 4 Monate ab Auftragse : Türkei : 27700 €: 529.07 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 560 mm: 560 mm: 750x560 mm: rund 410 mm, quadrat 410 : 590 mm: 1.1 kW: 4 kW: 0.12 kW: 3400 mm: 1000 mm: 2050 mm: 2045 kg2° inclined bandlinear guidescontrol panelmaterial limit shaftcoolant pump1200 mm roller tablehydraulic vicehydromechanic band tensioninginverterpresser adjustmentband brushoptical height adjustmentsecurity switchoperating manual in EnglischOPTION:turn table for mitre cutshydraulic top clamping from abovemicro cooling unitlaser cutting lineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 82900 €: 1566.81 €: Doppelsäulenführung : 8400x54x1,6 mm: 20-100 m/min: 650 mm: 1000 x 600 mm: rechteck 660 x 600 mm : rechteck 440 x 600 mm : rechteck 660 x 600 mm : 880 mm: 4 kW: 7.5 kW: 0.12 kW: 4400 mm: 2270 mm: 2660 mm: 6520 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmentHYDRAULIC UPLIFT OF SAWING FRAMEuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the softwar ...

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-44802-216

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-44803-121

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 38700 €: 739.17 €: Doppelsäulenführung : 8200x41x1,3 mm: 20-100 m/min: 810 mm: 810 mm: 850x810 mm: rund 480 mm, quadrat 480 : 585 mm: 1.5 kW: 4 kW: 0.12 kW: 3900 mm: 1200 mm: 2350 mm: 3080 kg2° inlined saw bandoptical height adjustmentlinear guidescontrol panelsecurity switchpressure adjustmenthydraulic vicechip brushhydromechanical blade tensioningcoolant pumpheavy duty gearbox1,2 m roller tableuser manual in GERMAN or ENGLISHOPTIONS:turn table for mitre cutshydraulic top clamping from aboveroller tables and band saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 12680 €: 243.46 €: Schwenkrahmen : 3120x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 350x140 mm: rund 230 mm, quadrat 200 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 830 mm: 1600 mm: 1550 mm: 1750 mm: 460 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: Industrial aluminium profile sawBlade diameter: Ø350 mmMotor power: 2.2 kWSpeed: 3760 rpmElectrical supply: 380V 3F 50 Hz Auction-ID: A7-44526-5

cutting diameter: 250 mmband length: 400 mmcapacity 90 degrees: square: 220 x 220 mmcapacity 90 degrees: flat: 250 x 130 mmcutting speed: 11/19/32 m/mintotal power requirement: 2 kWweight of the machine ca.: 400 Kgdimensions of the machine ca.: 1700 x 550 x 1270 mmHydraulic hacksaw with:- Electric-hydraulic raising and lowering of the saw frame- Coolant system- Good condition- Saw blades-- Saw blade dimensions 400 x 45 x 2.0 mm- Max. opening width of the vice 405 mm- Adjustable stroke speeds and cutting speeds- Mitre-adjustable viceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 3150x27x0,9 mm: 40/80 m/mincapacity 90 degrees: round: 260 mmcapacity 90 degrees: square: 250 mmcapacity 90 degrees: flat: 320x200 mm: 230 mm: 210 mm: 210x240 mm: 180 mm: 160 mm: 110x250 mmcapacity 60 degrees: round: 150 mmcapacity 60 degrees: square: 140 mmcapacity 60 degrees: flat: 140x160 mmwork height max.: 870 mmOverall size: 2100x2050x1950 mmControl: NC weight of the machine ca.: 770 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 335 mmsaw band length: 4400 x 34 x 1.1 mmcapacity 90 degrees: flat: 500 x 335 mmcapacity 45 degrees: round: 305 mmcapacity 45 degrees: flat: 305 x 335 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 335 mmclamping range: 0 - 500 mmwork height max.: 750 mmcoolant capacity: 100 lengine output: 3.0 kWweight: 1320 kgrange L-W-H: 1450 x 2350 x 1950 mm in a well-kept condition current new price machine approx. 35.000 euros special price on requestEquipment:- robust electro-hydraulic mitre bandsaw semi-automatic (INDUSTRY) Particularly suitable for universal use in a variety of applications. cross-sections, materials and frequently changing miter cuts Semi-automatic sawing sequence with workpiece clamping-sawing-raising- Central machine operation- stepless manual miter adjustment miter adjustment 45°li - 90° - 45°re - 30°re Digital actual angle ...

saw blade diameter: 350 x Ø 32.0 mmcapacity 90 degrees: flat: 175 x 75 mmcapacity 90 degrees: square: 110 x 110 mmcapacity 45 degrees: flat: 100 x 80 mmcapacity 45 degrees: square: 85 x 85 mmturning speeds: 3000 U/mintotal power requirement: 1.5 kWweight of the machine ca.: 180 kgdimensions of the machine ca.: 870 x 710 x 1435 mmEquipment :- semi-automatic circular saw for cutting PVC and aluminum profiles- two-hand safety operation- Miter adjustment : left 0 / - 45 / - 60 right 0 / 45 / 90- Large protective hood, covers entire working area- Saw blade- 2x vertical pneumatic clamping cylinders- Adjustable blade and cutting feed- Air dust gunWork sequence1) Setting the cutting angle2) Inserting the material3) Adjusting the stroke speed4) Bring the clamping cylinder up to 20 mm of material5) Clamp the material6) The machine is ready for operation by pressing the start button.7) Press and h ...

Technical data (Velox II / III) Saw blade diameter: 300 mm to 350 mm. Speeds: Very high (typically approx. 1,700 / 3,400 rpm), as it is designed for non-ferrous metals. Cutting range (90° round): approx. 100 mm to 120 mm. Cutting area (90° flat): approx. 180 x 50 mm to 200 x 80 mm. Mitre: Can be swivelled on both sides (usually 45° - 90° - 45°), often with fixed stops. Motor power: approx. 1.5 kW to 2.2 kW.Roller tracks approx. 4000mm Auction-ID: A7-44493-24

Kasto Hack Saw Machine Weight: 500kg Auction-ID: A7-44493-119

Mössner Rekord SV 420 Cutting Capacity: Projection (width): 410 mm to 415 mm. Passage height (max.): 265 mm. Saw blade & rollers: Roll diameter: 420 mm. Saw blade length: 3150 mm to 3260 mm (standard dimension often specified as 3210 mm). Saw band width: 3 mm to 16 mm. Work table: Table size: 600 x 600 mm. Swivel: 15° to 30° to the left and right. Table height: approx. 1020 mm from the floor. Drive & Speed: Cutting speeds: Depending on the model variant, 8 stages (approx. 18–562 m/min) or continuously variable via manual transmission (30–2000 m/min) Auction-ID: A7-44493-51

Table size: 600 mm x 605 Auction-ID: A7-44493-225

Unknown Auction-ID: A7-44493-28

Bergschmid Band Saw Auction-ID: A7-44493-131

: neu : ca. 10 Wochen ab Auftrags : Italien : 9420 €: 181.81 €: Schwenkrahmen : 2450x27x0,9 mm: 35/70 m/min: 220 mm: 200 mm: 250x150 mm: rund 160 mm, quadrat 140 : rund 90 mm, quadrat 90 mm : 800 mm: 0.7 kW: 1330 mm: 1300 mm: 1880 mm: 350 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentutomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.OPTION:Adjustable vice pressure (R1) EUR 403,--The data for this ad was created with ModulMWS - the software solution of Logo ...

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,27 tdimensions: 1,1 x 0,95 x 1,7 m- Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hoodThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

锯片直径：400毫米，容量90度：圆形：135毫米，容量90 度：方形：130毫米，锯片200 x 80毫米，锯片转速：12 / 25米/最小，总功率需求：千瓦，机器重量约0.75，机器 尺寸约：1.2 x 0.9 x 1.8米冷圆锯——半自动——液压夹紧——冷却系统—� ��保护盖——状况良好。本广告数据由LogoTech oHG的软件解决方案ModulMWS创建�

切割直径：260 毫米 长度：450 x 40 x 2 毫米 容量 60度：方形：240 毫米：260 x 180 总功率需求：2,0/2.6千瓦 机器重量约：1.4 尺寸：2.1 x 1.7 x 1.0 米 本广告的数据由 ModulMWS ——LogoTech oHG 的软件解决方案创建�