SHARK 512 SXI evo，半自动电液锯切机，带4640x34x1，1 mm，× 可在0.极其通用的机器，可进行左切和右 60 次之间的切割。切割周期：定位棒材后，启动循环， 行以下操作：副关闭 - 电机启动 - 切割头下降 - 电机停止 - 头返回 - 副打开。CYLCE DOWN UP：在半自动循环中操作，新功能DOWN使头部和刀片电 在切割完成后停止，通过按下UP按钮，头部升回其起 点，然后打开虎钳。 要求每种型号的MEP机器，我们有欧洲最优惠的价
Width of the band swa blades: 50-200 mmSharpening pitch: 60 mmWeight: 750 kgWINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNCPNK-CNC is designed to grind all types of band saw blades used in metal cutting.PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technologyTechnical specifications:- Band saw width 50-200mm- Band saw length Max. 12m- Blade thickness Min 0.4mm- Tooth pitch Max. 60mm- Tooth depth Max. 30mm- Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°)- Feed rate (speed controlled) Max. 90 teeth/min.- Grinding wheel dimensions D: Ø250mm d:Ø20mm- Grinding wheel thickness 5-13mm (depending on tooth pitch)- CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm- CBN Grinding wheel thickness 2-3mm (depending on tooth pitch)- Grinding wheel rotation (speed controlled) 1400-5500 r.p.m.- Grinding wheel ...
SHARK 281，手动带锯床从0到60左侧切割。几个特点：电气面 （接线完全可识别，备用，松键安全开关，主开关 变极开关，紧急停止，电机磁热过载，最小张力线圈 ，防止缺相，低张力安全装置（LTSD 24 V）.- IP55控制手柄。 欧洲所有机电设备的最优惠价格！索取报价！
长度：~ 700毫米 宽度：~ 600毫米 高度：~ 2,000毫米 Vollmer Junior B 自动带锯磨刀机，用于磨锐带锯刀片。该广告的数据 用ModulMWS——LogoTech oHG的软件解决方案——创建的
SHARK 281 CCS（切割控制系统）手动带锯机从0到60左侧切割。除 手动切割模式外，锯切机还可以在没有操作员的情 下进行单次切割，使用头部重量控制 - 由液压制动器引导：切割后带停止。此时的框架被手 提升到所需的位置，以便重新定位杆以进行切割。 带气动虎钳 （MA） 的版本中，阀钳由手动控制阀（可选配踏板控制）打 /关闭。 欧洲最优惠的价格！
Sawblade width max.: 120 mmWeight: 350 kgMotor output: 1,3 kWWINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-ABPNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness.Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding.Technical specifications:- Band Saw Width 15-120mm- Tooth pitch Max. 60mm Tooth depth 0-30mm- Tooth forms PV,NV,KV,PU,NU- Hook angle -10° to +30°- Feeding rate 0-90 teeth/min.- Motor quantity 2- Grinding wheel motor – 1.1kW, 1400 r.p.m.- Gearbox motor double-rev. – 0.55kW, 1400 r.p.m- Grinding wheel diameter Ø250mm- Grinding wheel bore diameter Ø20mm- Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch)- Operating voltage 400V, 3Ph, 50-60Hz- Total power ~1,3kW- Dimensions 80120175cm- Net/gross weight 350/375kgPNK-AB ...
尺寸（长/宽/高）：800x800x1350毫米 重量：35公斤 总功率需求：0千瓦 本广告的数据使用ModulMWS——LogoTech oHG的软件解决方案创建
Dimensions (L/W/H): 700x1000x1300 mmWeight: 115 kgTotal power requirement: 0,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1000x1500x1800 mmWeight: 570 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
