工具架 (111)

约23个Preciflex适配器 - 使�

consisting of approx. 64 pieces, incl. matching tool carrier system, partially equipped with cutting tools

大约100件Capto C4适配器，见照�

• consisting of approx. 15 pieces• partially equipped with machining tool• incl. tool carrier system

7个带Capto接口的Index VD30卡口，3个用它驱动，状态极佳�

Consisting of approx. 93 pieces, partially equipped with cutting tools such as solid drills, indexable insert cutters, tapping tools, boring tools, incl. matching tool carrier system

各种工具快接器，PARAT， WDR 4，WDL4，WD4，WB4， 按订单按数量收�

• consisting of approx. 100 VDI 40 tool holders• with collets• 8 driven tool holders• equipped with lathe tools such as turning steels

钻头快接器 '录制MK4（带适配器MK5） 插入页： 8个MK3电脑， 6件套MK2 1 个 MK1 电脑， 适用于钻床、镗床、车床等�

• Consisting of approx. 160 pieces• mostly equipped with high-quality machining tools such as drills, cutters, taps, reamers• incl. matching workshop cabinet from the manufacturer TRAUB

各种驱动刀具夹具和多定位磁�

consisting of three pieces, holder: VDI 40

包工具座 VDI 30 制造商：EWS 钻杆座 D=8、10、12、16、20、25、32、40毫米 科莱特·霍尔德 16分自责分，25分自失分，32分自责分 左右侧转动钢制支架 大约有250件作品可供使用 也要单独提交 其他镜像如VDI 40、SK 40、HSK 63及按需提�

• Tool Holder: SK 40• Incl. matching tool case and various boring tools.

我们有几款 Multifix 钢支架，尺寸为 D1D，有各种设计的库存。 部分还使用钻头和车削钢。请咨询确切的日期和要求� �� 很高兴也大量使用�

• consisting of six pieces• as good as new

gebr.钢支架插件 Fabr.Tripan，431 型 Kj Uregwt Ucehyxkonb 请单独索取相应的数量。

• consisting of approx. 11 pieces• type: AD2090.

我们有几款 Multifix 钢支架，尺寸为 D1D，有各种设计的库存。 部分还使用钻头和车削钢。请咨询确切的日期和要求� �

• Quantity: 11 pieces• Type: BD25140, as well as BD25120 and BH30130• incl. two turning tools

我们有许多 Multifix 钢支架，尺寸为 C 有各种设计的库存。 部分还使用钻头和车削钢。请咨询确切的日期和要求� ��

• consisting of approx. 88 pieces• mostly equipped with machining tools such as internal coolant drills, milling cutters, cutter heads, carbide cutters, partly shrunk, partly normal• incl. matching workshop cabinet TRAUB

约 170 个刀柄，部分刀柄配有工�

• Incl. workshop cabinet• consisting of approx. 56 pieces• partly shrunk, partly normal and partly equipped with cutting tools

棱镜支撑实心钢 指标： 宽度： 137 厘米 深度： 40 cm 高度： 30 / 50 cm - 适用范围：D750-D2250 - 钢对钢：100吨 - 中间层钢材：200吨 - 净重：1100公斤 更多商品 - 新的和二手的 - 可以在我们的商店找到！ 国际运费可应要求提供�

In various designs, the exact scope cannot be defined.

HSK 100 267 件来自 Haimer、Mapal、Hoffmann 和 Nikken 的刀柄，包括废料夹头、Weldon 刀柄、滑动式铣削心轴和弹簧夹�

• consisting of approx. 64 pieces• incl. tool carrier system

符合 ISO 40、OSO 50、HSK 40 + 63 + 80 +100 的高质量刀具装配块。工具头可以通过快速释放紧固� ��更换。 工具可以旋转 8 次 45°。

• in various designs and sizes• approx. 42 pieces

Key data: 40 mm, 6 kg

1x VDI 40 钢支架支架 C4 C4-RC2040-51030 L= ;B= ;重量G：= 3kg 2.2）58760圆柱形C4适配器直径50x90mm 9x 内部提取器支架 10x 外部旋转支架 3x 外穿孔支架 尽可能可见.. 1） C4_R166_4KF-12060 内螺纹旋转支架 2） C4-B_SNR-27042-12 3） C4-R166.4FGZ-27050-16 外转支架右三角板： 4） C4-SDJCR-27050-11 外置旋转支架右三角板 5） C4-DSSNR-27042-12 外部旋转支架，右侧 1x 带板，从上方夹紧 6） C4-SVJBR-27050-16 外部旋转支架，右侧 1x，带插件，内六角螺钉 7） C4-SDUCR-13080-11 Coro Turn钻杆，内部旋转方板-Torx 斯克萨姆克 8） C4-PCLNR-17090-12 夹紧内部扭矩 9） C4-SVQBR 13090-16 内部旋转支架复制板 10） 3个 C4-RF15.1230-G20-27050B & 27060B 斩断刀柄剑 根据要求提供运费 索取更多信�

• Lot of SK 40 tool holders• consisting of approx. 20 pieces• partially equipped with cutting tools

16件刀柄外部加工 41 刀柄内加�

• Consisting of 7 pieces• incl. machining tool

SK40 DIN 69871 焊缝给油机 32mm

• In various designs• the exact scope cannot be defined

SK40 DIN 69871 喂油器满足韦尔登40mm记录 A= 65毫米 用于没有通过主轴进行内部冷却的机器的内部冷�

• consisting of approx. 35 pieces• equipped with machining tools• Attention: the measuring probe visible in the photos is not included in the scope of delivery! • Incl. tool carrier system

快速原装 TRM 350 快速释放支架 TRM350 型 索引 0.005 带 7 个可互换的颈部 4 件 201/350 34mm 1 小时 202/350 Prima 32mm 2 件 216/350 直径 50mm

• consisting of approx. 16 pieces• equipped with cutting tools such as internally cooled drills, solid carbide cutters• incl. matching tool carrier trolley

1个带有各种刀柄的箱子用于车�

consisting of approx. 46 pieces, partly equipped with machining tools, incl. tool carrier system

• Consisting of approx. 43 pieces• partially equipped with cutting tools• incl. matching transport trolley

consisting of 40 pieces

• Consisting of approx. 39 pieces• mostly equipped with high-quality machining tools• incl. matching cabinet

• consisting of approx. 41 pieces• incl. tool carrier system

consisting of approx. 14 pieces.

• Partially shrunk, partially normal• partially equipped with cutting tools• consisting of approx. 54 pieces

• consisting of approx. 41 pieces• mostly equipped with cutting tools such as drills, internally cooled drills and milling cutters• incl. tool trolley