履带式挖掘机 (45)

功率210千瓦，带额外尾梁，类型：LO4651B，序列号。300 1335，运行时间为9,050小时，注：Longfront设有长臂和短� ��;注：长前挖掘机位于德国Korschenbroich街41352号的施工 场地�

Auction-ID: A7-45990-45

工作重量：21,500公斤，功率：110千瓦，运行时间约3500 小时，配备快速联挂器。注意：图片中拍摄的混凝土� ��碎机不属于本标�

Auction-ID: A7-45990-12

运行重量：24,400 公斤，功率：124 千瓦，运行时间：5300小时，配备快联挂器，Fabr。莱� �霍�

Auction-ID: A7-45990-44

工作重量：22,500 公斤，功率：141.2 千瓦，工作时间约 3400 小时，配备防护罩支撑和适配器板，Fabr。莱恩霍�

Equipped with: hydraulic quick coupler (Eurosteel CW H125, year of construction 2021), excavator bucket, double hydraulic functions on the boom, working lights, air suspension seat, window protection, 2 speeds Auction-ID: A1-40137-14

工作重量：8400公斤，功率：51.6千瓦，配备快速联挂� ��Fabr。LEHNHOFF，2021年青年会�

Auction-ID: A7-45990-6

功率：29.5千瓦，工作重量4965公斤，含叶片支撑和装� �铲斗，运行时间约4200小�

Auction-ID: A7-45990-20

桶链挖掘机KS 160，制造商为ROHR 类型：浮式桶链挖泥机 铲斗梯长度：28米 挖掘机深度：15米 铲斗容量：已提升至175升 桶散装：8-32/分钟 理论流量：76-307立方米/小时 驱动：改装为电�

Auction-ID: A7-45990-50

工作重量： 23,000 kg 发动机：康明斯 QSB7（符合欧 V 标准） 功率输出：124 rpm 时为 166 kW （2050 HP） 液压泵：PNM 高性能泵 控制阀： Parker 液压控制阀 回转发动机：Sunjin （韩国） 行走马达：斗山 液压系统压力：34 MPa 铲斗容量：1.1 m³ 回转速度： 0–13 rpm 行驶速度： 3.8–4.2 公里/小时 爬坡能力： 30 最大挖掘半径： 9.936 mm 最大挖掘深度： 6,550 mm 最大挖掘高度： 9,680 mm 最大卸载高度：6,730 毫米 总长度： 9,565 mm 总宽度： 2,990 mm 总高度： 3,000 毫米 轮距： 600 mm 履带高度： 950 毫�

Auction-ID: A7-45990-2

GB 180 履带式挖掘机专为严苛的挖掘、提升和重型作业而设� ��。 工作重量： 18,000 kg 发动机：康明斯 QSF3.8（符合欧洲标准） 输出功率：93 kW （125 HP） at 2200 rpm 液压泵：恒力高压液压泵 控制阀：Husco 精密控制阀 回转发动机：Eaton 或 Sunjin（韩国） 行走马达：Eaton 或 PMP 液压系统压力：28 MPa 铲斗容量：0.8 m³ 铲斗挖掘力： 98 kN 臂挖掘力： 68 kN 回转速度： 0–12 rpm 行驶速度： 2.8–4.2 公里/小时 爬坡能力： 30 总长度： 8,540 毫米 总宽度： 2,720 mm 总高度： 2,920 mm 底盘宽度： 2,720 mm 离地间隙： 480 mm 轮距： 600 mm 最大挖掘半径： 8,985 mm 最大挖掘深度： 5,975 mm 最大挖掘高度： 9,430 mm 最大卸载高度：6,960 毫米 尾部回转半径： 2,57 ...

Auction-ID: A7-45990-42

工作重量： 9,000 kg 发动机：康明斯 QSF2.8 （符合欧 V 标准） 输出功率：53 kW （71 HP） at 2200 rpm 液压泵：恒力高压泵 液压阀：Husco 精密控制阀 回转发动机：Eaton 或 Sunjin（韩国） 行走马达：Eaton 或 PMP 液压工作压力：28 MPa 铲斗容量： 0.4 m³ 最大挖掘力： 58 kN 回转速度： 0–12 rpm 行驶速度： 2.8 km/h 爬坡能力： 70% （35） 外形尺寸： 长度： 6,410 毫米 宽度： 2,278 毫米 高度： 2,630 毫米 底盘宽度： 2,200 mm 离地间隙： 800 毫�

Auction-ID: A3-43524-12285

工作重量： 7,500 kg 发动机：久保田 V2607（符合欧洲标准） 输出功率：42.4 kW （56.8 HP） 转速为 2200 rpm 液压泵：PNM 高性能液压泵 液压阀：HF & Parker 控制阀 铲斗容量： 0.28 m³ 铲斗挖掘力： 56 kN 臂式挖掘力： 38 kN 回转速度： 0–11 rpm 行驶速度： 2.8 km/h 爬坡能力：70% （35°） 最大挖掘深度： 3,898 mm 最大挖掘高度： 7,023 mm 最大卸载高度： 5,195 mm 尾部回转半径： 1,730 mm 外形尺寸（长 × 宽 × 高）：6,054 毫米 × 2,216 毫米 × 2,672 毫�

- Incl. 1 x backhoe bucket approx. 65 CM; - Incl. hydraulic quick coupler Verachtert; - Shield; - Monoarm; - Hammer brutalization; - Air conditioning - A/C; - Ready to drive; - Condition see photos; - Video on request; - Viewing recommended; Auction-ID: A1-46334-32

如果您有兴趣，请随时写�

Hours: 7,100, quick coupler, 700 mm tracks, hammer hydraulic line, rear-view camera, air conditioning, engine power 85.9 kW, operating weight 14,400 kg, made in Korea Auction-ID: A7-46263-14

我们销售 Zeppelin ZR15 挖掘机作为备件运输车，建于 1990 年，配备道依茨发动机 F6L912，功率为 74 kW。 也可以购买挖掘机的备�

Hours: 11.859, equipped with hammer hydraulic line, undercarriage approx. 70%, in good working condition, width 3.09 m, operating weight 22,620 kg, engine power 123 kW Auction-ID: A7-46263-13

柳工履带式挖掘机925E 建设年份 2020 营业时间：250 工作重量：25，500公斤 - 根据要求 -

Equipped with: Verachtert sorting grab, Hydraulic quick coupler, climate control, Mitsubishi 6-cylinder diesel engine with hydraulic grab. Good working Auction-ID: A1-40136-34

液压挖掘机履带式挖掘机履带式挖掘机 制造商： 现代 类型： 罗贝克斯 280 LC 建造年份 约1999 6缸四冲程柴油机 发动机型号：康明斯6BT 5.9 / 128马力 机箱长度约为： 4900 mm 驾驶室高度约为： 3000 mm 底盘宽度： 3400 mm 超宽采石场沼泽链，链宽约： 810 毫米 重量约 30 至 挖掘桶奥斯卡迈尔 AG 型 ASM 100 旋转齿轮箱的小齿轮和旋转接头的密封件进行了修复� �

Power: Diesel engine; 1–4.9 t class mini excavator Operating parameters: Operating hours 11,279 h; stick length 1,620 mm; triple grouser tracks 400 mm w/ rubber inserts; digging bucket 730 mm Workpiece capacity: Compact excavator <6.6 t; suitable for urban construction, landscaping & utility works Supported edges: Soil, gravel, light demolition materials (typ.) Edge types: Excavating, trenching, backfilling, grading Included equipment: Enclosed cab; air conditioner; auxiliary hydraulic plumbing; backfill blade; 400 mm tracks; 730 mm bucket; Fast Fuel system Compliance: Industrial construction equipment; Serial No. CAT00306CMXH00442 Power supply: Diesel Year/Manufacturer: 2010 / Caterpillar – CAT 306 Remarks: Used condition; 11,279 operating hours; well-equipped compact excavator with A/C and auxiliary hydraulics 4.9 t class mini excavator with enclosed cab and hydraulic auxili ...

Please note; machine smokes quite a lot, CW30 Hydraulic switch, 3rd+4th function, work lights, automatic grease lubrication, compressor, self-priming fuel pump, digital display, reversing camera, car idle, heating, air conditioning, radio, heated seats, Auction-ID: A1-40136-80

# Volvo ECR88 crawler excavator Volvo ECR88 compact zero tail swing, year of construction 2020, with approx. 1000 working hours. Machine is in good working condition and is suitable for various earthmoving and infrastructure works. Equipped with a 4-cylinder Volvo diesel engine with an output of approximately 41 kW (±56 hp), combined with an efficient hydraulic system for precise control and high productivity. ([volvoce.com][1]) Operating weight approx. 8.5 – 9.0 tons, transport width approx. 2.30 m. ([Heavy Equipment Hub][2]) Maximum digging depth approx. 4.1 – 4.8 m and ground level range up to approx. 7.0 m, depending on boom configuration. ([speceps.com][3]) Equipped with closed cabin, hydraulic control and compact zero tail swing construction, ideal for working in confined spaces. Machine comes with 5 buckets. --- Key Specs: Year of construction: 2020 Hours: ±1000 h ...

Komatsu PC128us Very few hours Rubber pads Maintenance every 500 hours New quick coupler New excavator bucket Cameras all around Auction-ID: A3-43520-19019

Case CX600 All pipes for options available Had maintenance every 500h - last 4147h Auction-ID: A3-43520-19016

General information Brand: New Holland Construction Model: E26C Type: Hydraulic excavator (mini excavator) Series/Type designation: M-TRAC Identification & production Product Identification Number (PIN): NCE2600003195 Machine / chassis no.: E26C 3195 (as visible on nameplate) Year of construction: 2021 Made in: South Korea Engine manufacturer: CNH Industrial Italia S.p.A. ⚙️ Technical data Engine power: 18.8 kW Max. certified weight: 3500 kg Noise level sticker: LwA 94 dB Hours Read operating hours: 124.5 hours ️ Equipment & options (visible) Closed cab (with heating/ventilation) Joystick control Rubber tracks Cover blade (dozer blade) Hydraulic quick coupler Excavator bucket available Additional hydraulic lines on the arm Auction-ID: A3-43520-11424

(dr) Crane with 3 bins (dr) Hydraulic quick coupler CW10 (dr) Long arm (dr) papers available (dr) Start, drive and do what it's supposed to do Auction-ID: A3-43520-11423

Bobcat E85 Hydraulic quick coupler CW10 3 bins (Slots, Teeth, trunk Hose bridge system for lifting and hoisting start, drive and execute what it needs to do Auction-ID: A3-43520-11422

Wacker Neuson 2402 HVT crawler excavator configured for forestry applications. Equipped with a diesel engine (approx. 140–160 kW), turbocharged and liquid-cooled. Operating weight between 18,000 and 22,000 kg depending on the configuration. The machine has a high-strength tracked undercarriage with reinforced forestry chassis. The hydraulic system includes high-performance variable displacement pumps, multiple auxiliary hydraulic circuits and proportional electro-hydraulic control, with dedicated lines for harvester head. HVT version with tilting cab. Forest safety cabin in accordance with FOPS / ROPS regulations, equipped with a protective front grille. Upper structure with 360° rotation, electronic control system, joystick operation and emergency stop system. Auction-ID: A7-45986-1

Unused Viewing by appointment Auction-ID: A1-40377-13

Used excavator in working condition Auction-ID: A1-40418-10

Auction-ID: A7-45990-11

8,200 working hours, 500 mm tracks, width 2.49 m, hydraulic quick coupler, grading bucket, 2 hydraulic lines, rear-view camera, air conditioning, dozer blade, CE marked, engine power 72.1 kW, operating weight 14,300 kg. Auction-ID: A7-46263-18

hybrid crawler excavator, year 2018, 7,481 working hours, CE marked, made in Japan, engine power 124 kW, operating weight 23,800 kg, hybrid system with approx. 12% lower fuel consumption due to electric assist, width 2.99 m, 600 mm tracks, quick coupler, hydraulic line, rear-view camera, side camera, air conditioning. Auction-ID: A7-46263-12

3,750 working hours, 2 buckets, in excellent condition, air conditioning, rubber tracks approx. 80%, PIN anti-theft protection system, hydraulic quick coupler, dozer blade, CE marked, engine power 48 kW Auction-ID: A7-46263-16

Hours: 2,663 hours; excavation and grading bucket; new tracks; hydraulic quick‑coupler for bucket change, fault‑free and in excellent condition. Auction-ID: A7-46263-3