x-travel: 2500 mmy-travel: 2500 mmz-travel: 1700 mmcontrol: Siemens Sinumerik 840 D max. workpiece weight: 6000 kgspindle diameter: 130 mmquill stroke: 700 mmtool taper: ISO 50 DIN 69871 - AD max. torque at the spindle: 1847 Nmtotal power requirement: 65 kWweight of the machine ca.: 45 tdimensions of the machine ca.: 10,9 x 9,3 x 5,7 mWork table -Clamping surface 2500 x 2000 mm -Table height above floor 800 mmFeed speed -x-axis 0.5 to 10000 mm/min -y-axis 0.5 to 10000 mm/min -Z-axis 0.5 to 10,000 mm/min -Rapid traverse (x/y/z) 25 / 25 / 25 m/min -Max. feed force (x/y/z) 28,000 / 27,000 / 28,000 N Spindle speeds in rpm -Gear stage 1: 6 to 1004 rpm -Gear stage 2: 950 to 4000 rpmEquipment/accessories: -Approx. 30 SK 50 tool holders -1 measuring probe -Coolant system/paper belt filter & chip conveyor -Cooler -Oil mist extraction -Fixators -T ...
spindle diameter: 110 mmx-travel: 2200 mmy-travel: 1600 mmz-travel: 1600 mmspindle turning speed range: 35 - 3000 U/minspindle drive motor: 18,5 / 15 kWspindle taper ISO: 50 w-axis: 500 mmtable surface area: 1250 x 1500 mmTable load: 5000 kgT-slot - width: 22 H8 B-axis (table): 0,001 °Control: FANUC 31i-B Rapid Travel X / Y / Z-Achse: 12 m/mintotal power requirement: 50 kVAweight of the machine ca.: 21,5 tdimensions of the machine ca.: 7,8 x 4,8 x 3,7 mAssembly 2018- CNC control FANUC 31i-B- Tool changer 60-fold (ISO 50)- Coolant system with IKZ 20bar- Chip conveyor- Renishaw OMP 60- Universal milling head- Angled table (2)- CEonly approx. 800h running hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mmx-travel: 1.500 mmy-travel: 1.250 mmz-travel: 1.000 mmw-travel: 550 mmtable surface area: 1.000 x 1.250 mmworkpiece weight: 6.000 kgquill stroke: 550 mmtool taper: ISO 50 number of spindle speeds: 5-3.700 U/min.max. torque: 2012 Nmfeed speeds: 1-6000 (x-Achse) mm/minfeed speeds: 1-6000 (y-Achse) mm/minfeed speeds: 1-6000 (z-Achse) mm/minrapid traverse x/y/z: 15/ 15/ 15 m/mindimensions of the machine ca.: 7,51 x 5,07 x 3,33 m: 63 kVAEquipment/ Accessories:- CNC control Siemens 840 D - 60 ATC- Coolant system with high-pressure pump 30 l/min.- 20 bar- documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 110 mmx-travel: 2.100 mmy-travel: 1.500 mmz-travel: 1.000 mmw-travel: 500 control: HEIDENHAIN TNC 430 connected load: kVAWorking Spindle: - boring quill diameter: 110 mmspindle taper: DIN 69871 ISO 50 spindle power: 22 kWtransmission ratio: 2 turning speed range: 2.000 U/minclamping table: - max. workpiece weight: 4.000 kgsurface area: 1.100 x 1.300 mmfeeds: feed range X-, Y-, Z- axis: 0 – 10.000 mm/minfeed range W-axis: 0 - 10.000 mm/minrapid motion - x-axis: 10.000 mm/minrapid feed Y, Z, W-axis: 10.000 mm/mintotal power requirement: 22 kWweight of the machine ca.: 23.000 tdimensions of the machine ca.: 7,1 x 6,5 x 3,7 mEquipment.• CNC-control HEIDENHAIN 430• support bearing• manual milling head• coolant tank with pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
主轴直径：100毫米x行程：1200毫米y行程：800毫米总功 要求：kW机器重量约：t空间要求约：5.6x3.4x3.x7米品 ：Femco类型：WBT-100SR2CNC品牌：三菱CNC型号：Meldas C3建造年份：1995-05计划支持桌子长度：1，440毫米工作 台宽度：1，600毫米主轴直径：100毫米ø机器尺寸（lxbx h）：5，680 x 3，400 x 3，700毫米包括角铣头型休伦该广告的数据是使用模态 MWS创建的 - 标识科技oHG的机器管理
主轴直径：105 mmx 行程：1000 mmy 行程：1000 mm总功率要求：kW机床重量约：t空间要求约为：m品牌 Juaristi类型：MDR105 CNCCNC品牌：海德汉CNC型号：TNC145建造年份：1983工作台 长度：1，000 mm工作台宽度：1，000 mmX：1，000 mmY：1，000 mmZ/W：1，000 mm主轴锥体：ISO 50主轴直径：105 mm该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理
