WEINIG Unicontrol 12 NC 窗户装置

Tenoning spindle: 2 St.
Number of milling agregates: 7 St.
Spindle diameter: 50 mm
control: Weinig, PC-Nexus
Weinig Unicontrol 12
with radial and axial CNC spindles as well as VARIO table and milling carriage
................................................
Machine dismantled professionally and in our warehouse in 73447 Oberkochen.
Video and pictures were taken before dismantling.
Technical data summary
(please inquire about any additional accessories included)
................................................
crosscut saw
................................................
> Electronic crosscut saw, horizontally infinitely adjustable
> Number of tools: 1 piece.
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
> Tool diameter max.: 400 mm
> Motor power: 3.7 kW
> Laser directional light to detect the saw section
> Axial adjustment path 150 mm NC axis, electronically infinitely variable
> Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above
Rounding aggregate
................................................
> Position: horizontally below
> Motor power: 1.5 kW
> Spindle diameter: 20 mm
> Tool clamping length: 25 mm
> Spindle speed: 9,000 rpm
> Tool diameter: max. 130 mm
> Axial adjustment path mechanically coupled with crosscut saw.
> Radial adjustment pneumatically controlled on/off
electronic length stop
................................................
> Length 4500 mm
1. Tap and slot spindle
................................................
> Number of tools: variable
> Motor power: 15 kW
> Spindle diameter: 50 mm
> Tool clamping length: 640 mm, with counter bearing
> Axial adjustment path: 580 mm NC axis, continuously variable
> Spindle speed: 2,800 rpm
> Tool diameter: max. 400 mm
> Overtravel counter, complete clamping length is countered
2. Tap and slot spindle
................................................
> Number of tools: variable
> Motor power: 15 kW
> Spindle diameter: 50 mm
> Tool clamping length: 640 mm, with counter bearing
> Axial adjustment path: 580 mm NC axis, continuously variable
> Spindle speed: 2,800rpm
> Tool diameter: max. 400 mm
> Overtravel counter, complete clamping length is countered
Transfer tape
................................................
Included for transferring the parts to longitudinal machining
Separation of double parts before the start of longitudinal processing.
1. Profiling spindle (synchronous and counter-rotation)
................................................
> Position: vertical right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with counter bearing
> Axial adjustment path 350 mm NC axis, infinitely variable
> Radial adjustment path 80 mm NC axis, infinitely variable
> Spindle speed: 6000 rpm
> Tool flight circle min.: 140 mm
> Tool flight circle max.: 232 mm
> 2 feed rollers axially pneumatically controlled opposite the spindle,
8 positions
> Table top pneumatically controlled to the tool diameter
2. Profiling spindle
................................................
> Position: vertical right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with counter bearing
> Axial adjustment path 350 mm NC axis, infinitely variable
> Radial adjustment path 80 mm NC axis, infinitely variable
> Spindle speed: 6000 rpm
> Tool flight circle min.: 140 mm
> Tool flight circle max.: 232 mm
> 2 feed rollers axially pneumatically controlled opposite the spindle,
8 positions
> Table top pneumatically controlled to the tool diameter
3. Profile milling unit (grooving device from above)
................................................
> Position: horizontal at the top
> Motor power: 3.7 kW
> Spindle diameter: 40 mm
> Tool clamping length: 40 mm
> Axial adjustment path 30 mm NC axis, infinitely variable
> Radial adjustment path 125 mm NC axis, infinitely variable
> Spindle speed: 9000 rpm
> Tool flight circle max.: 130 mm
> Position: vertical right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with counter bearing
> Axial adjustment path 350 mm NC axis, infinitely variable
> Radial adjustment path 80 mm NC axis, infinitely variable
> Spindle speed: 6000 rpm
> Tool flight circle min.: 140 mm
> Tool flight circle max.: 232 mm
> 1 feed roller axially pneumatically controlled opposite the spindle,
2 positions
4. Profiling spindle
................................................
> Position: vertical right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with counter bearing
> Axial adjustment path 350 mm NC axis, infinitely variable
> Radial adjustment path 80 mm NC axis, infinitely variable
> Spindle speed: 6000 rpm
> Tool flight circle min.: 140 mm
> Tool flight circle max.: 232 mm
> 2 feed rollers axially pneumatically controlled opposite the spindle,
8 positions
> Rung support bar clocked vertically after the last profiling spindle
5. Profile milling unit (fittings spindle)
................................................
> Position: vertical right
> Motor power: 3.7 kW
> Spindle diameter: 40 mm
> Tool clamping length: 160 mm
> Axial adjustment path 115 mm NC axis, infinitely variable
> Radial adjustment path 100 mm NC axis, infinitely variable
> Spindle speed: 5850 rpm
> Tool flight circle max.: 210 mm
> 1 feed roller axially pneumatically controlled opposite the spindle,
2 positions
6. Profile milling unit (grooving device from above), in the additional stand
................................................
> Position: working vertically to the right from above
> Motor power: 3.7 kW
> Spindle diameter: 40 mm
> Tool clamping length: 40 mm
> Axial adjustment range 44 mm, 8 positions using a pneumatic turret
> Radial adjustment path 100 mm NC axis, infinitely variable
> Spindle speed: 9,000 rpm
> Tool flight circle max.: 130 mm
7. Profiling spindle (grooving device from below, in the additional stand)
................................................
> Position: horizontally below
> Motor power: 3 kW
> Spindle diameter: 40 mm
> Tool clamping length: 125 mm
> Axial adjustment path 100 mm NC axis, infinitely variable
> Radial adjustment path 100 mm NC axis, infinitely variable
> Spindle speed: 5850 rpm
> Tool flight circle max.: 200 mm
> 1 feed roller axially pneumatically controlled opposite the spindle,
2 positions
Other features
................................................
> online capable
> Folding device for tear-free folding
> Milling carriage for milling sashes with frame widths under 500 mm.
Automatic pneumatic clamping
> 9 feed rollers controlled up/down after the last profiling spindle
faster and shorter milling process
> Feed height adjustment with NC axis
> Divided pressure ruler on the left, pneumatic, divided for wood widths 40-140
mm
> Double parts package
> Return conveyor for 1-man operation: slat conveyor
> Screen controls
> Slanted window device
> Electronic angle display for sloping windows
> Control: NEXUS PC control
> Vario table with horizontal NC axis
> Automatic central lubrication
> Air conditioning unit in the control cabinet
> Machine without processing tools
If the technical characteristics of this machine do not meet your expectations
correspond, please contact us. Our long-standing
Our experienced team will be happy to support you with any adjustments or
Find a machine that meets your needs!
(Technical information according to the manufacturer - no guarantee!)
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.