Steam turbine for sale.
The turbine was built in 2012, is in good condition and is no longer
in operation.
Model SST-060
Turbine with impeller in so-called constant-pressure design ("action
wheel"). The turbine rotor is mounted on two bearings and consists of
the above-mentioned impeller and a shaft, which are connected to each
other by means of Hirth gearing. The impeller is located outside the
bearing and consists of one piece. The blades are milled out of the
solid disc.
Live steam pressure: 13.0 ´bara at turbine flange
Live steam temperature: 191.6 ´C at turbine flange
Live steam flow max: 10,000 kg/h
Exhaust steam pressure: 5.2 bara at turbine exhaust flange
Turbo generator sound pressure level: 92 dB(A) z 3 dB(A)
measured at a distance of 1 m
Coupling power: 275kW
Total terminal power: The tolerance is 1.0%.
265kWe
The pressure drop for the cyclone to be provided shall be less than or
equal to 0.2 bar.
Technical data:
Filling machine Plümatex-F 014 4-S for filling TZT blisters made of
plastic.
Machine design:
1. frame
2. control cabinet with Plümatex control unit
3. protective panelling
4. vertical lifting unit
5. horizontal lifting unit
6. filling system
7. filling valves with filling nozzles
8. CIP - SIP unit
Material:
All parts in contact with the product are made of stainless steel
316L, other parts are made of stainless steel 304.
Layout:
see drawing U6158834 1984-01.3
Performance:
Packing dimension:
40 x 60= 840 TZT/1,5h
60 x 80 = 504 TZT/1.5h
80 x 120 = 672 TZT/1.5h
The effective output can be impaired by operating errors, which mainly
occur at the start of commissioning, or by poor material.
Filling accuracy:
40 x 60 = 22 - 26g (24g +-1%)
60 x 80 = 44 - 50g (47g+-1%)
80 x 120 = 90-100g (95g+-1%)
The product must be fed to the filler under pressure, either via a
pump (see options) or a pressurized container.
(required pressure approx. 0.5 - 2.0 +-0.2bar)
Product:
H2O2-containing collagen dispersion
Fülltemperatur:
max. 25°C +-3°C
Find more here - /
Contact us at -
