风扇 500 至 28，000 m3/h 零售价格：100欧元，- 每1000立方米/小时 因此，5000 m3 / h的风扇费用为500欧元-加上增值税。 我们有用于喷漆室、提取墙、干燥室、油漆储藏室和� ��他应用的风扇库存。 请与我们联系。 对于涂装车间，我们有完整的装置，灯具，过滤天花� ��，入口大门，卷帘，格栅，空气管道等。 请咨询我们，电话：0171-9508841�

Nicotra Gebhardt P2M 工艺风扇 带直接驱动的外壳风扇，无联轴器 - 单面吸力 稳健的工业设计 耐用，易于维护 高效、安静运行 以标准价格提供个性化解决方案 根据 ISO 9001 认证并保证质量 根据 DIN 24163 测量的技术数据 精度等级 2，符合 DIN 24166 螺旋模压外壳 坚固的焊接结构 90 个步骤的外壳位置 单独安装位置 径向叶轮 车轮直径 500 毫米 向后弯曲的刀片 焊接 防尘 材料：钢涂层，热浸镀锌，不锈钢 1.4307 ATEX：2 类和 3 类;气体和粉尘 制造商：Nicotra Gebhardt 体积流量：8000 m³/h 直径：1070 Pa 密度：1.2 kg/m³ � ...

Data sheet of retrofit POS. GE 11.70 Gebhardt 5.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Belt length: 900 mm Length of main conveyor: 5,549 mm (incl. upper bow piece) Length upper bow piece: 613 mm Total width: 610 mm Belt width: 500 mm Belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 650 mm H 2 above 2,300 mm Difference in altitude: + 1,650 mm, trail/slope 19° or 34% Support: Please ask without support, if needed Use: in the on - and backward operation, any oth ...

Data sheet of retrofit POS. GE 22.10 Gebhardt 7.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7.449 mm (incl. upper bow piece + straight piece) Upper bow piece length: 392 mm Upper straight piece length: 3,830 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 1700 mm H 2 above 2,800 mm Difference in altitude: + 1.100 mm, trail/slope 19° or 34% Support: ask without s ...

Gebhardt Belt conveyor system 5549-610-500 with pre-flow belt 900-610-500 RA1005 The belt conveyor system from Gebhardt is from 2007 and is in a very good (used) condition. It has an engine of the brand SEW. The system can be used in up-and-down operation. Inclination angles are adjustable as desired, upper arc and supports can be adjusted. Columns are not included in the scope of delivery. These are optionally available. Consisting of: 1 x pre-flowstrip, 1 x main band, 1 x sheet piece Technical data: Manufacturer: Gebhardt Type: 300.10 Position: GE 12.20 Built: 2007 Condition: very good (used) Engine: fully functional Length main band: 5549 mm (incl. top bow) Nominal/outer width (NB): ...

Data sheet of retrofit POS. GE 12.05 Gebhardt 7.7 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7,733 mm (incl. upper bow piece + straight piece) Upper bow piece length: 375 mm Upper straight piece length: 1,293 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without  ...

Data sheet of retrofit POS. GE 11.85 Gebhardt 6.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 6.529 mm (incl. upper bow piece) Upper bow piece length: 613 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operat ...

Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic mold ...

Gebhardt Powered roller conveyors roller conveyor 6000-610-550 RA1909 Make: Gebhardt Roller width (RB): 550 mm, Steel rolls Nominal/outer width (NB): 610 mm length: 600 mm Rolls diameter: 50 mm Roller distance 100 mm Overall height frame: 130 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Scope of delivery: without supports Optionally available: Supports Side guides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 6000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,00/1,15 sc ...

RA1288 Gebhardt Roller Conveyor System individually plannable. Price on request! We plan your individual conveyor system with tested, used Gebhardt conveyor technology, according to your wishes! Large quantities and different designs available! The Gebhardt conveyor systems are in a very good (used) condition. The roller conveyors are available in different versions, e.g. as: gravity roller conveyors and curves - roller conveyors and curves without drive roller conveyors and roller curve conveyors - roller conveyors and curves with drive Accumulation roller conveyor (without accumulation pressure) - for separating the conveyed material Inclined inlets and pusher - for infeed or outfeed Strok ...