金属加工设备 / 铣床 / 圆台铣床
生产厂家: DMG MORI
型号:DMU 65 H monoBLOCK
机械类型: 圆台铣床
产品编号: 170271004
数量: 1
日期： 02.10.2026
设备所在地:
德国
价格:
Seller-item-No.:064153
| General | |
| Horizontal universal machining center; Control: CELOS X with Siemens SINUMERIK ONE | |
| Working area 1 | |
| Longitudinal | 650 mm |
| Cross | 700 mm |
| Vertical | 950 mm |
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 60000/60000/60000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 60/60/60 m/min |
| Cabine | Full protection cabin |
| Taper cleaning brushes | Taper cleaning unit with rotating brushes for spindle taper HSK |
| Stop block + 3-point-support | Stop block + 3-point-support Design according to DECKEL MAHO Standard |
| Package Mill / Turn HSK-A 63 | Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis max. 1.200 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 m |
| Kinematics axis A / C for swivel rotary table | Axis kinematics A/C for swivel rotary table Axis designation swivel axis: A Axis designation rotary axis: C 0° position A axis: table vertical Rotary axis setting: modulo Machine datum: In table center on the table top Not compatible with monoBLOCK kinem |
| Tool magazine, wheel, 123 pockets HSK-A63 | Tool magazine wheel magazine (2 wheels) with 123 tool pockets HSK-A63 or optionally chosen spindle taper |
| Operation panel for loading station tool magazine | Control panel for loading station tool magazine with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise LTSB - 64 bit |
| ICS unit 40 bar 980 l tank | Internal coolant supply unit: 980 l / 259 gallon, paper band filter Internal coolant supply, 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD) External coolant supply 4 bar / 58 psi - 40 l/min / 10.4 gpm (theoretical pump performance) roo |
| Tool measuring in machining area Blum Laser FD | Tool measuring in machining area Blum Laser DIGILOG Laser-system for milling tools, 3D touch-probe for turning tools |
| rotoLENS - milling head camera | rotoLENS - Camera with rotating lens integrated in the milling head Visualization via CELOS and HDMI Digital zoom and recording function |
| High accuracy measuring probe Renishaw | High accuracy infrared measuring probe Type Renishaw PP600 optical (OMP 600) HSK-A63 or optionally chosen spindle taper |
| Mill-turn pallet d630 mm - PH Cell / LPP | Mill-turn cast iron pallet d630 mm without pallet claw |
| Automation interface PH Cell 800 | Automation interface for PH Cell 800 Profinet interface via M65 NC swivel rotary table with pallet carrier Automatically operated front door Communication software CNC-Master Computer |
| Rotating clear-view window | Rotating clear-view window cabin door |
| Control cabinet lighting with power outlet | Control cabinet lighting with power outlet Lighting in the control cabinet with motion sensor power outlet 230V - 10A (Type F - Schuko) Other types of outlet on request Connected before the main switch (for this the customer must provide a loadable neutra |
| Tropical package FD (ambient temp. max. 50 °C) | Package for tropical climate for ambient temperature at machine location from 35° to 50° Celsius (only in connection with option FD-package) |
| Split-able chip conveyor | Separable chip conveyor Less space required behind the machine for pulling out the chip conveyor in case of maintenance |
| Cooling | Cooling by air blast through spindle centre, selection with M function |
| Interface for Oil and emulsion mist separator | Interface mechanical and elektrical for oil- and emulsion mist separator |
| Tool breakage control mechanical | Tool breakage control mechanical version |
| 3D quickSET extension package | 3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools) |
| Sensorpaket i4.0 | Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor |
| Laminated safety glass | Laminated safety glass for window in right cabin door |
| Operation mode 4 | Operation mode 4 "Process monitoring in the production" Manual intervention with open doors of machining area Release after completed check list |
| Alternating rotation speed | Alternating rotation speed Process stabilisation to prevent vibrations for turning operations |
| Tilted measuring cycle | Tilted measuring cycles. Measuring cycle package for tilted measuring of components to determine the center of the workpiece and for alignment of the rotation center to the coordinates-origin via a straight line or hole. Only in connection with Siemens. |
| PH Cell 800 | PH Cell 800 pallet loading and unloading system with handling- and pallet rack system - Handling system with pallet gripping system, Transfer weight max. 800 kg / 1760 lbs (pallet with load) - 1 shelf module with 2 shelf floors - Workpiece height control |
| Pallet Management Pallet Master | Pallet management Pallet Master Cells order management control Operation via CELOS machine control panel or optional automation control panel via touch screens and keyboard Job-, project- and pallet management |
| Pallet Management Pallet Master Pro | Pallet management Pallet Master Pro Remaining time display Multiple orders per pallet Advanced tool analysis |
| Milling / Turning set-up station, rotatable | Milling / Turning set-up station with pallet clamping, rotatable |
| 1st shelf 2 floors for 6 x 500/630/800 mm pallets | 1st shelf module with 2 shelf floors to store up to 6 pieces of 500x500 or 630x630 or d630 or d800x630 mm pallets |
| 2nd shelf 2 floors 6 x 500/630/800 mm pallets | Additional 2nd shelf module with 2 shelf floors to store up to 6 pieces of 500x500 or 630x630 or d630 or d800x630 mm pallets |
