锯床 二手 出售 (1,235)

报价 22252 规格： - 切割范围为 90 圆 + 方形 330 毫米 - 平面 600 x 320 毫米 - 斜接可调左/右 30 / 45 - 施尼特布。45 Re + Li 圆 320 毫米 - 平面 350 x 320 毫米 - 材料支撑高度约 920 毫米 - 锯片尺寸 4440 x 34 x 1.1 毫米 - 切割速度无级可调 10 至 100 m/min - 水合物。提升 – 降低锯架 - 锯架的行程上限 - 切割压力无级可调 0 - 10 m/min - 水合物。材料虎钳 - 冷却剂装置 - 总驱动功率 400 V / 2.2 kW - 空间要求 宽 1400 x 高 1400 x 深 2400 毫米 - 重量约 1000 公�

Key data: 550 mm

最大锯长： 6,000 mm 最小切割长度：335 毫米 最大锯片直径： 550 mm 通过 E 255 控制器自动定位长度 内外旋转 22.5° - 90° - 140° 在 45 到 90 度之间倾斜角度 数字角度显示 移动辊筒输送机 最小用量喷涂装置

cutting diameter: 240 mmsaw band length: 2730 mmcutting width: 270 mmcutting speed: 37 + 74 m/mindimensions of saw-band: 2730 x 27 x 0,90 mm: 240 mm: 230 mm: 270 x 230 mm: 210 mm: 200 mm: 200 x 210 mm: 130 mm: 130 mm: 130 x 160 mmtotal power requirement: 1,2 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 1,6 x 1 x 1,7 mhigh-quality processed metal band saw with 2 band speeds, miter up to60°, automatic cooling and AutoCut feed system - for sawing solid material andprofilesexecution High-quality processed and equipped metal band saw for saw cutsbest quality For sawing solid material and profiles made of steel, stainless steel and aluminium Miter cuts up to 60 degrees left Saw band speed adjustable in 2 stages Frame and gearbox made from one piece, very quiet and low-vibration cut Easy, clear miter adjustment with scale Quick release vice with quick release lever for easy ...

cutting diameter: 220 mmsaw band length: 2450 mmcutting width: 250 mmcutting speed: 40 / 80 m/mindimensions of saw-band: 2450 x 27 x 0,9 mm: 100 mm: 90 mm: 90 x 90 mm: 160 mm: 160 x 110 mm: 250 x 190 mmtotal power requirement: 0,75 / 1,1 kWtable height: 925 mmweight of the machine ca.: 218 kgdimensions of the machine ca.: 1300 x 700 x 1530 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmdimensions of saw-blade: 350 x 32 x 2,5 mmcutting diameter: 115 mmstroke: 100 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180 x 95 mmcapacity 45 degrees: round: rechts & links 110 mmcapacity 45 degrees: square: rechts & links 95 mmcapacity 45 degrees: flat: rechts & links 125 x 95 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 90 x 95 mmcutting speed: 15 - 90 m/mintotal power requirement: 2,6 kWweight of the machine ca.: 375 kgdimensions of the machine ca.: 1000 x 950 x 1800 mm-The powerful, 2-stage gear was specially designed for cuts in solid materialdesigned-The user has a total of 4 blade speeds for optimal adjustmentthe material available-The large bearing rotary table with internal table clamping andPrecision stops at 0/45/60° ensure quick adjustabilitymiter cuts-The vice with quick clamp ...

cutting width: 375 mmCutting height: 150 mmdimensions of saw-blade: 500 x 30 mmMotor output: 2 x 3 kWCutting length: 5100 mmspeeds: 2800 U/minair pressure: 6 barweight of the machine ca.: 700 kgdimensions of the machine ca.: 6100 x 1450 x 1450 mm Profile support plate made of steel Stable cast construction of the saw unit Large cutting range, 2 profiles can be cut at the same time Easy adjustment of the moving unit with roller guides Double storage of the swivel device Safe clamping thanks to the two-pressure system Double saw feed guide Hydropneumatic saw feed External dimension correction scale Left saw unit fixed Swivel range 45°-90° Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 500 mmthroat: 1050 / 485 mmworkpiece height: 300 mmsaw band length: 3920 - 4050 mmcutting speed: 15 - 940 m/mintable height: 1040 mmtable surface area: 750 x 800 mmTable tiltable: 15 Gradtotal power requirement: 4,0 kWweight of the machine ca.: 1750 kgdimensions of the machine ca.: 2100 x 1000 x 2100 mm- Fully automatic miter band saw- MAC 90 control- Saw feed infinitely adjustable via precision throttle- Infinitely adjustable clamping pressure- Infinitely variable speed adjustment of the saw band- hydraulic bundle clamping- chip conveyor- Cooling device- Micro dosing device- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 800 mmthroat: 765 mmworkpiece height: ? mmtotal power requirement: ? kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2 x 1 x 2,6 mNo. 1548Vertical band saw KÖLLE BG-80Working area: Table, tiltable 1200 x 800Passage saw blade machine stand 765 mmIDEAL saw blade welding and grinding deviceRoller diameter 800 mm.Space requirement approx. 2 x 1 x 2.6 mWeight approx. 900 kgmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 275 - 315 mmcutting diameter: 80 - 102 mmstroke: - mmtotal power requirement: 2 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,5 x 1, 5 x 2 mNo. 5230Cold circular saw with additional gearbox for 4 speedsEISELE VMS II - S - PV ( Typ-Nr. 421 )Additional gearbox 10/20/40/80 min-1Cutting speeds 8.5 - 80 m/minSaw blades Ø 275 - 315 mmSpace requirement approx. 80 x 90 x 180 cm (plus roller conveyor + fence)Weight approx. 400 kgWorking range: Ø 80-102 /flat 160x75/82Drive: 1,4/1,9Feed - roller conveyor approx. 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

卷径：400 mm喉部：375 mm工件高度：？mm总功率要求：kW机器重量 ca.：t机器尺寸 ca.：mNo. 1291立式带锯 PEHAKA USM-4工作范围：通道 375旋转台面 600 x 600 mm，锯片尺寸：2900-3040 x 3-12mm切割范围 3-180 m/min，吹屑装置理想的锯片焊接打磨装�

cutting diameter: 280 mmsaw band length: 3370 mmcutting width: 350 mmdimensions of saw-band: 3370 x 27 x 0,9 mm: 280 mm: 250 mm: 350 x 200 mm: 240 mm: 220 mm: 230 x 220 mm: 170 mm: 150 mm: 170 x 100 mmsaw tape speed: 37 + 74 m/mintotal power requirement: 1,8 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 1,5 x 1,7 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 255 mmsaw band length: 2765 x 27 x 0,9 mmtable height: 950 mm: 18-110 m/min: 255 mmcapacity 90 degrees: square: 240 mmcapacity 90 degrees: flat: 300 x 180 mmcapacity 45 degrees: round: 210 mmcapacity 45 degrees: square: 190 mmcapacity 45 degrees: flat: 200 x 160 mmcapacity 60 degrees: round: 135 mmcapacity 60 degrees: square: 110 mmcapacity 60 degrees: flat: 130 x 100 mmcapacity 45 degrees: round: rechts 180 mmcapacity 45 degrees: square: rechts 160 mmcapacity 45 degrees: flat: rechts 180 x 100 mm: 1,5/1,8 kW: 350 kg: 1700 x 900 x 2000 mmManufacturer no. 20437Description:- Miter cuts left 60° and right 45°- Quick-action clamping stick can be moved in the T-slot for quick position changes- Hydraulic brake cylinder- Large ball-bearing turntable for easy miter adjustment (durable)- Chip clearing brush- Machine base with automatic cooling system- Lockable main switch, eme ...

cutting diameter: 350 mmsaw band length: 4640 x 34 x 1,1 mmtable height: -- mm: 350 mm: 15 - 100 m/min: 4,0 kW: 2800 kg: 2200 x 3200 x 2200 mmFully automatic band saws with two-column guide for series cuts in particularmaterials that are difficult to machine and solid material.With this machine, MEP offers you a machine that is technically on thehighest level and by using the highest quality materials one is nothas an unbeatable, robust and torsion-resistant structure. An extremeRobust saw bow made of gray cast iron ensures the necessary stabilityimpressive cutting results and the strong cast iron columnswhich the saw arch slides by means of pre-stressed linear guides take care of themselvesat maximum load for the highest cutting precision. The modernMachine control (MEP NC 5.0) offers the user maximum ease of use andensures trouble-free operation. (Check/evaluation/correction inreal tim ...

saw blade diameter: 370 x 3,0 x 40 mmcutting diameter: 120 mmstroke: -- mmcapacity 90 degrees: square: 100 mmcapacity 90 degrees: flat: 180 x 100 mmcapacity 45 degrees: round: li. 120 / re. 105 mmcapacity 45 degrees: square: li. 100 / re. 100 mmcapacity 45 degrees: flat: li. 130x100 / re . 130x10 mmcapacity 60 degrees: round: 110 mmcapacity 60 degrees: square: 90 mmcapacity 60 degrees: flat: 90 x 100 mmtotal power requirement: 1,8 / 2,2 kWweight of the machine ca.: 392 kgdimensions of the machine ca.: 700 x 900 x 1800 mm-The powerful, 2-stage gear was specially designed for cuts in solid materialdesigned-The user has a total of 4 blade speeds for optimal adjustmentthe material available-The large bearing rotary table with internal table clamping andPrecision stops at 0/45/60° ensure quick adjustabilitymiter cuts-The vice with quick clamping (optional is a pneumatic oneVise = MA, availab ...

切割直径：340 / 340290 毫米带长：600 52 2,5 毫米最大切割长度：X 600 毫米总功率要求：6 kW机器重量：2 吨机器尺寸：2,52,51,5 �

cutting diameter: 305 mmsaw band length: 3375 mmcutting width: 350 mmdimensions of saw-band: 3375 x 27 x 0,9 mm: 305 mm: 260 mm: 350 x 200 mm: 250 mm: 230 mm: 230 x 200 mm: 175 mm: 155 mm: 170 x 100 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,5 x 1,8 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 255 mmsaw band length: 2765x 0,9 x 27 mmcutting width: 300 x 180 mmturning speeds: 35 + 70 U/mintotal power requirement: 1,8 kWweight of the machine ca.: 450 tdimensions of the machine ca.: 1,7 x 1,23 x 1,75 mSPECIAL PRICE!Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250Super HA-I Easy• miter left 60° + right 45°• Material height sensor (automatic cut start detection)• Frame and gear made from one piece, very quiet cut and very low vibration• Hydraulic vice can be moved sideways a.• Guided, high quality industrial bearings• Solid vice + machine casting• Large machine bed• Machine base with tool compartment and chip drawer• Cut monitoring by ammeter• Cutting pressure feed regulator• Support roller (infeed side)• Ball bearing turntableSemi-automatic function:1. Clamp material2. Saw starts3. Rapid lowering to the s ...

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 820x610 saw band length: 5850 x 41 x 1,3 mmband speed: 15 - 100 m/mintable height: 800 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4,45 tdimensions of the machine ca.: 5,85 x 3,6 x 2,7 m2-column band saw for quick cutting, K-tech 800Hwith pusher system P 15. P 30 (option),Fast, quiet and ergonomic cuttingSpecial development for cutting profiles and beamsas well as solid material. The material is fixedvertically on and section sides. The machine is from K-tech 800 Hstandard with an additional horizontal viceequipped. The interaction of the hydraulicSaw frame lowering, material positioning and thePusher system is CNC controlled.The machines come standard with the environmentally friendlyB&S-Clean Cut cutting system” with minimal quantity lubricationequipped. This saves cleaning effort and is gentleReso ...

saw blade diameter: 250 mmcapacity 90 degrees: round: 85 mmcapacity 90 degrees: square: 75 mmcapacity 90 degrees: flat: 100x65 mmcapacity 45 degrees: round: 80 mmcapacity 45 degrees: square: 75 mmcapacity 60 degrees: flat: 90x60 mmtotal power requirement: 0,8 kWweight of the machine ca.: 0,04 tSPECIAL PRICE!The assembly saw with extensive standard equipment and a large cutting area· For miter cuts left up to 45°· For sawing steel, stainless steel and, to a limited extent, aluminum profiles· Automatic cooling directly on the saw blade· 24 V safety switch in the handle with restart lock· 38 kg total weight = easy to transport· Length stop, assembly toolOptions:Saw blade 57 EURMachine base type 20505 192,-EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 380 mm max.band length: 430 mmweight of the machine ca.: 0,5 t: : : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 330 mmcapacity 90 degrees: flat: 510 x 320 mmcapacity 90 degrees: square: 320 x 320 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3440 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgSemi-automatic, electro-hydraulic band saw machine for cutting60° left to 60° right.Versatile machine with a tape of 4640 x 34 x 1.1 mm for theCutting pipes, profiles and beams up to a maximum cutting rangefrom 510x320 mm to 0°.The control console on a swiveling arm allows for comfortable andsafe operation from any position.Electronic inverter for continuous belt speed regulationfrom 15 to 100 m/min.Large turntable with a diameter of 280 mm and engravedexact fine scaling, easily adjustable and stored.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 mmcapacity 90 degrees: round: 108 mmcapacity 90 degrees: square: 93 mm: 150 x 90 mmWorking height: 920 mmsaw blade turning speeds: 17+33 oder 33+66 U/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,328 tdimensions of the machine ca.: 0,8x0,9x1,7 mACTION PRICE!High-performance vertical circular saw VKS 315 (Article 20150)• miter left 60° + right 45°• Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift• Saw table with large rotating plate and particularly stable vice for optimal material tension• Robust prism guide of the saw head (dovetail guide adjustable)• Automatic cooling• Machine base with chip drawer• Metal handle for high clamping forceATTENTION: Price is without saw blade! (saw blade price EUR 109)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 100 mm: 180x100 mmWorking height: 925 mmsaw blade turning speeds: 15 - 70 U/mintotal power requirement: 1,8/2,2 kWweight of the machine ca.: 0,71 tdimensions of the machine ca.: 1,9 x 1,45 x 2,1 mACTION PRICE!High-performance vertical circular saw hydropneumatic fully automatic.(20192)· miter left 60° + right 45°· Hydro-pneumatic control of the saw unit· Electro-pneumatic material feed unit· Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results· Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter· Precision prism guide of the gear head, laterally adjustable· Particularly stable base frame with built-in automatic cooling system· Large chip drawer· Chi ...

cutting diameter: 1060 mmsaw band length: 11.430 x 80 x 1,6 mmcutting width: 1,6 mmcutting range: 1060x1260 mmControl: CNC cutting speed: 12-90 m/minpower capacity: 11 kWtable load: 20 tCutting Length max.: 6100 mmtotal power requirement: 20 kWweight of the machine ca.: 21,1 tdimensions of the machine ca.: mAutomatic feed length 2,100 - 6,100 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus  ...

cutting diameter: 440 mmweight of the machine ca.: 780 kgmiter: feed: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

切割直径：260 毫米序列号：109967 伏特：380 伏频率：50 赫兹机器重量约：500 �

切割直径： - mm锯带长度： - mm台面高度： - mm总功率要求： - kW机器重量 CA.： - T机器尺寸 CA.： - m

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 1250x600 saw band length: 8140x54x1,6 mmband speed: 15 - 90 m/mintable height: 855 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4,96 tdimensions of the machine ca.: 5,7 x 4,0 x 2,75 m2-column band saw for quick cutting, K-tech 1200Hwith pusher system P 30. P 60 (option),Fast, quiet and ergonomic cuttingSpecial development for cutting profiles and beamsas well as solid material. The material is fixedvertically on and section sides. The machine is from K-tech 800 Hstandard with an additional horizontal viceequipped. The interaction of the hydraulicSaw frame lowering, material positioning and thePusher system is CNC controlled.The machines come standard with the environmentally friendlyB&S-Clean Cut cutting system” with minimal quantity lubricationequipped. This saves cleaning effort and is gentleResourc ...

锯片直径： 380 mm气动夹紧： ja 机器重量 CA.： 1,3 t

capacity 90 degrees: round: 350 mmcapacity 90 degrees: square: 330 mm: 500 x 310 band speed: 15 - 100 m/mintable height: 844 mmdimensions of saw-band: 4250 x 34 x 1,1 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1,4 x 2,4 x 1,935 mACTION PRICE!2-column double miter band saw K-tech DG 50/33 HA-I• 2-column miter saw• Solid, yet easy to use• Material height sensor (automatic cut start detection)• Smooth running thanks to bevel cut, feed controller + cutting pressure controller• Massive material infeed roller• Removable chip tray (disinfection)• Energy-saving and low-vibration thanks to bevel cut• Ergonomic, safe and free-standing control panel• Frequency-controlled saw drive 15 -100 m/min.• Hydraulic cutting pressure control valve• Hydraulic control of saw frame and vice• LEDs for monitoring all safety functions• L ...