钻床，镗床 二手 出售 (3,255)

Key data: 750 mm, 600 mm, 520 mm

数控五轴高速处理立式加工中心 DMG DMU 70 eVo 线性设计 建设年份：2011年 Heidenhain iTNC 530 二轴NC旋转台 桌面尺寸 Ø 700 x 500 mm 最大桌载350公斤 C轴旋转360° x 0.001° 旋转轴 B-轴 120° x 0.001° X 750毫米 Y 600毫米 Z 520毫米 主轴驱动电机 25/35 千瓦 主轴转速最高为18,000转/分钟。 60折刀具弹匣位置 HSK-A63刀具夹具 工厂电气化参观 报价编号 MV-6513

Key data: 600 mm, 500 mm, 500 mm

数控五轴立式加工中心 DMG 森DMU 60 eVo 建设年份 2017 Heidenhain TNC 640 ERGOline 二轴NC旋转台 桌面尺寸：600×500毫米 桌面载重最大400公斤 表：NC 旋转轴 C轴 360° 表 NC 旋转轴 B 轴 -5° / +110° X 600毫米 Y 500毫米 Z 500毫米 主轴座 SK 40 BIG PLUS 主轴驱动功率 25 / 35 kW 交流 主轴转速可达20,000转/分钟。 120个工具弹匣槽 运营时间：47,589 主轴工时 28,638 报价编号 MV-6512

4个受控轴用于轮廓加工 X轴行程：7,200毫米 旋转A轴：0-180 转速范围：0-18,000转/分钟 机器上有8个座位的换刀机，床上还加了额外的换刀机 自动张紧器换挡 X代型材加工，配备Schüco CAM软件且可控 关于SchüCal+ - 计算程序 营业时间： 机器运行时间：15605小时 / NC工作时间：3691小时 配件/设备： 标准工具组（使用） 5.5千瓦主轴 （新主轴频率转换器） （新电脑/手柄） 该机器经过检修、尺寸调整，可立即交付。 重量：约5,000公�

数量 1 二手钻孔、标记与去毛刺机 制造商：Vernet Behringer 型号：FG 2005 制造：2010年 停运：2021年 板尺寸：2000 X 1000 X 60 毫米 最大载荷：630 公斤 刀具更换器：8 Ø 钻孔功率：16千瓦，160-4000转/分钟 钻孔直径：最大50毫米

Key data: 2000 mm, 600 mm, 700 mm

五轴数控加工中心 制造商Matec 30型高压型 建设年份 2013年 对照Heidenhain iTNC530同时治疗 Travel X/Y/Z 2000/600/700mm NC旋转台D=950毫米，载重1200公斤 最高转速：18,000转/分 工具弹匣 48 页 IKZ 26bar 自动工具测量 工具断裂检测 3D无线按钮 M & H 电动手轮 HR410 碎屑输送机 控制点：33344小时 程序运行时间11291h 机器处于TOP状态，技术和几何都非常优秀�

Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Loewe, adjustable machine reamer -Diameter: Ø 26 mm -Recording: MK1 -Dimensions: Ø 26 x 290 mm -Weight: 0.6 kg

Machine reamers, reamer, reaming tool, locating cutter set, attachment reamer -Machine reamer: adjustable, 2 pieces -Diameter: Ø 32/55 mm -Mounted holder: MK3 -Submission/Price: complete -Transport dimensions: 360/90/H60 mm -Weight: 3.6 kg

Machine reamers, reamer, reaming tool, locating knife cutting set -Machine reamer: adjustable, 3 pieces -Diameter: Ø 28/30/38 mm -Recording: MK2 -Submission/Price: complete -Transport dimensions: 340/100/H40 mm -Weight: 2.7 kg

Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Kahaco, Adjustable machine reamer, 6 pieces -Diameter: Ø 24/26/31/32/33/38 mm -Recording: MK3 -Submission/Price: complete -Transport dimensions: 380/180/H45 mm -Weight: 6.8 kg

Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Kahaco, adjustable machine reamer -Diameter: Ø 62 mm -Recording: MK4 -Dimensions: Ø 62 x 455 mm -Weight: 4.3 kg

控制西门子828D 行程 X/Y/Z：1100 x 610 x 610 毫米 桌面尺寸：1250 x 610 毫米 主轴转速：12,000分1 30 Wkz.、SK 40 工具弹匣 主轴冷却 三维探�

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, expansion sleeve -Morse taper sleeve: Morse taper extension MK2 2 pieces -Type: MK2/2 -Total length: 300 / 450 mm -Submission/Price: complete -Transport dimensions: 450/55/H30 mm -Weight: 2.2 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK3 5 pieces -Type: 4x MK3/3 / 1x MK3/4 -Price/Fee: complete -Transport dimensions: 400/180/H45 mm -Weight: 7.8 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK4 4 pieces -Type: 2x MK4/4 / 1x MK4/5 / 1x MK4/1 -Price/Fee: complete -Transport dimensions: 560/180/H65 mm -Weight: 9 kg

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmTransverse stroke260 mmLongitudinal stroke1345 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)5,4 x 2,07 x 2,6 mWeight approx.7800 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

提供水平加工中心（HMC）。行程 X/Y/Z：560毫米/510毫米/510毫米，最大动力学：40000毫米/ 分钟，主轴：12000转/分，刀具夹持：MAS BT 40，工具匣：60格（链条匣），托盘系统：两站托盘更 换器，托盘尺寸X/Y：400毫米/400毫米，附件：约200个刀 具夹持架（BT 40），2个MMI塔，8根夹紧杆，带铰链式碎屑输送机，Blu m激光/探针， 雷尼肖3D探针，机器重量约9000公斤。可预约检查�

Control unit, control panel, operating unit, keyboard, screen, control, two-hand control console -Manufacturer: Elan, two-hand control panel with counter -Type: SEP 03.0.2.1.22 -Connector: 10-pin -Dimensions: 460/440/H140 mm -Weight: 6.4 kg

Key data: 630 mm, 630 mm, 630 mm

主轴更换 2018年12月 技术数据： 制造商：Heller 类型：H1000 控制：西门子840D SL 建设年份：2008年（投工时间：2010/11） 行程X/Y/Z：X 630毫米，Y 630毫米，Z 630毫米 B轴行程：360 工作主轴 转速：10,000转/分钟（凯斯勒） 工具 刀具更换器：54折 刀具夹具：SK40 托盘更换器：2折叠 托盘尺寸：500 x 400毫米 状况 状态：使用过 功能性：经过测试且功能齐全 其他设备和配件包括： 直接测量系统 钻孔断裂检测 碎屑输送机 高压小丘冷却系�

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Computer cabinet, server cabinet, control cabinet, network server cabinet, computer housing-Manufacturer: RITTAL-Type: IT Solutions TE 7000-390-Field of view: 400 x 400 mm-Number: 1x cabinets available-Price: per piece-Dimensions: 600/600/H580 mm-Weight: 40 kg

Automatic drill, drill press, drill press, stand drill, pillar drill-Spindle mount: MK 3-Transmission-Automatic drill: with rapid traverse-Automatic drilling-Threading: automatic-Table size: 450 x 360 mm-Projection: 285 mm-Spindle stroke: 150 mm-Speed: 180-2000 rpm-Feed: 0.08-0.32 mm/rev-Dimensions: 900/1000/H2100 mm-Weight: 840 kg

Multi-spindle head, multi-spindle drill head, drilling gear- Joint multi-spindle head-max.: x drill-3x built-in drill collet: mm-min. Distance drill: mm-Weight: 11.3 kg-Articulated multi-spindle heads are variable tools: for various machining operations such as drilling, thread cutting, ountersinking, reaming, milling, turning, with which several holes can be machined at once.

Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

Multi-spindle head, multi-spindle drill head, drilling gear-Joint multi-spindle head-Max. x drill-7x drill built-in collet: mm-min. Distance drill: mm-Weight: 11.3 kgArticulated multi-spindle heads are: variable tools for various machining operations such as drilling, thread cutting, countersinking, reaming, milling, turning, with which several holes can be machined at once.

Magnetic drill, hand drill-Magnetic base: Magnetor type PS 32 L-Drilling machine: AEG type HBE-IV- Recording: MK2-Max. Drill: Ø 23 mm -Connection: 265V/200Hz-Dimensions: 700/300/H670 mm-Weight: 49 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Manufacturer: Artykuly Techniczne, adapter sleeve: Morse taper sleeve MK6/5-Type: PTPk-6/5-Dimensions: Ø 64/130 mm-Weight: 1.5 kg

Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 3x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Number: 1x drill heads available -Price: per piece -Dimensions: 140/75/H95 mm -Weight: 3 kg

Drilling machine, drill press, pillar drill, column drill -Condition: Working -Note: Clamping table repair-welded, see pictures -Manufacturer: Flott, column drill type SB 15 -Spindle mount: MK2 -Motor: 0.525 kW -Speed adjustment: via V-belt -Speed speeds: 215 - 400 - 730 - 1250 - 2300 - 4300 rpm -Table size: 220 x 220 mm -Spindle holder: MK2 with drill chuck -Travel: 360 mm -Spindle stroke: 55 mm - Throat: 295 mm -Column Ø: 100 mm -Accessories: collecting tray for coolant -Dimensions: 930/700/H1805 mm -Weight: 190kg -Handover: in current condition as seen

Drill press, bench drill, column drill, pillar drill-Manufacturer: TOS, high-performance column drilling machine type 40 TF / C-Motor: MEZ 2.2 kW-Speeds: 56 - 2240 rpm-Table size: 400 x 315 mm, travel 600 mm-spindle taper: MK4-Spindle stroke: 165 mm-Projection: 290 mm-Pillar Ø: 140 mm-Dimensions: 1200/650 / H1990 mm-Weight: 602 kg

handheld terminal, handheld control device, operating unit, control panel, operating panel, operating unit, operating device, programming device-Manufacturer: Siemens, Simatic S5 operator panel-Type: OP 393 III 6ES5393-OUA 15-Protection class: IP 50-Number: 2x control unit available-Price: per piece-Dimensions: 148/320/H55 mm-Weight: 0.7 kg/piece