弯曲按 ITALPRESSE 模组。PHF 60 - CE 规则 - 底板 毫米 1600X1100 - N. 4缸 - 最大开局1000 - 电机最大功率1.5千瓦 - 伏特。380/50 - 2001
100 € 加入备选清单
Adjustable press pressure 50 tons, Cylinder stroke 1000 mm, cylinder rod thick 100 mm. Free workpiece height 1000 mm can be increased to 1250 mm. Anvil 300 x1420 mm, stamp 300 x 1000 mm rotatable 360 degrees. With nitrogen tank to hold the pressure of the press. Hydraulic unit Motor 380 volt, 1.5 Kw. The 4 steel tubes are disassembled for transport. Auction-ID: A1-48994-35
JJZ-CP型压力机设计用于生产胶合板、门、中密度纤维 。 胶合元件通过驱动辊自动送入和从压力机上取下。 该压力机可与送胶机一起使用。 规格： -最大压力500T/可调/ -最大装载高度 1300mm -最大批量大小 1300x2500 -印刷机尺寸 3600x1370x4500 毫米 -压基 ~500 mm 低于地面 -喂料台 2000x1960 mm -接收台 2350x2500 毫米 -最大功率 13.2 kW -CE -每小时6批次的产能 目前，我们在压力机上粘合面板门和中密度纤维板。 非常好的技术条件。我们提供专用于这些压力机的胶 板生产线
1.400 € 加入备选清单
- Four-column hydraulic press for pressing and die-cutting operations. - Nominal force 15 T. - Work table 1500 x 1200 mm. - Maximum opening approximately 1600 mm. - Four-column structure with vertical guide of the moving plate. - Upper hydraulic unit integrated into the structure. - Total installed power 11 KW. - Electrical panel with SIEMENS PLC. - Perimeter security guards with front access. - Integrated control desk and control panel. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-5
11.500 € 加入备选清单
- Nominal force 400 T. - Dimensions of the work table approx. 1900 x 1500 mm. - Carriage stroke approx. 1600 mm. - The electrical control panel is incomplete; The rest of the machine's electrical installation remains installed. - Installation with access platforms for maintenance of the upper equipment. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-4
16.500 € 加入备选清单
- Automated compression molding line composed of pre-press, main press, automatic loading and unloading system. - Hydraulic pre-press with clamping force 200 t. - Prepress work table 1900 x 1000 mm. - Approximate maximum opening of the prepress 1700 mm. - Main hydraulic press with closing force 600 t. - Main press worktable 2100 x 1600 mm. - Maximum aperture approximately 1750 mm. - Automatic parts loading system. - Automatic unloading system by means of an ABB 6-axis industrial robot equipped with handling tools for the extraction of parts. - Perimeter protection cabin with safety guards and interlocks. - Integrated electrical control panel and control desks. - Installation with access platforms for maintenance of the upper equipment. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those ...
液压机佩莱格里尼 热水 加工面积 4000 mm x 1300 mm 手动涂胶，包括 插入表 验收：真空 - 龙门叉车SIRIO
16.500 € 加入备选清单
- Automated compression molding line composed of pre-press, main press, automatic loading and unloading system. - Hydraulic pre-press with clamping force 200 t. - Prepress work table 1900 x 1000 mm. - Approximate maximum opening of the prepress 1700 mm. - Main hydraulic press with closing force 600 t. - Main press worktable 2100 x 1600 mm. - Maximum aperture approximately 1750 mm. - Automatic parts loading system. - Automatic unloading system by means of an ABB 6-axis industrial robot equipped with handling tools for the extraction of parts. - Perimeter protection cabin with safety guards and interlocks. - Integrated electrical control panel and control desks. - Installation with access platforms for maintenance of the upper equipment. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those ...
3.600 € 加入备选清单
- Nominal force 400 T. - Maximum working pressure of the hydraulic system 25 MPa. - Dimensions of the work table approx. 2050 x 1600 mm. - Carriage stroke 1500 mm. - Maximum tool dimensions 2000 x 1300 x 600 mm. - Approach speed 500 mm/s. - Working speed 10-100 mm/s. - Return speed 500 mm/s. - Total installed power 52.50 kW. - Electrical control panel with regulation of process parameters. - Perimeter protection cabin with safety guards and interlocks. - Installation with access platforms for maintenance of the upper equipment. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-3
1.400 € 加入备选清单
- Nominal force of 15 T. - Work table of approximately 1500 x 1200 mm. - Maximum opening approximately 1600 mm. - Ø 80 mm main thrust cylinder. - Four guide columns of Ø 95 mm. - Drive by upper hydraulic group with electric motor. - Equipped with SIEMENS SIMATIC OP7 control panel, PILZ safety controller and RAYTEK pyrometers for temperature control. - Electrical panel integrated into the machine. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. - Operating conditions of this item: unchecked. Auction-ID: A7-48840-9
1.700 € 加入备选清单
- Nominal force of 50 T. - Work table of approximately 1400 x 1000 mm. - Maximum aperture approximately 1150 mm. - Main thrust cylinder of Ø 150 mm. - Four guide columns of Ø 95 mm. - Drive by upper hydraulic group with electric motor. - Equipped with SIEMENS SIMATIC control panel, PILZ safety controller and OMRON electronic controllers. - Electrical panel integrated into the machine. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. - Operating conditions of this item: unchecked. Auction-ID: A7-48840-8
pressure: 250 tdistance between columns: 600 mmstroke: - mmtotal power requirement: 22 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 2 x 2 x 3,2 mNo. 3421Mould press 2500 / 700 kNSingle stroke 2-handSingle stroke foot switchAutomatic continuous run set-up and tippingTable 500 x 500Working range: Pressure capacity 250 tonnesDrive: ^22The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 ttable surface area: 2100 x 1400 mmpassage width: 2122 mmtotal power requirement: 60 kWweight of the machine ca.: 35 tdimensions of the machine ca.: mPress/punch with injection molding unit200 ton punch upstroke press with injection molding machine (400to)Additional guard locking via 4 power strokesManufacturer: R+S TechnikYear of construction: 2013 / rebuild 2016Mains voltage/frequency: 400V/50Hz 3~(N/PEConnected load: 60KWWeight about 35000kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
200 € 加入备选清单
- Work table 1600 x 1500 mm. - Maximum opening approximately 300 mm. - Main cylinder of Ø150 mm. - Four auxiliary cylinders of Ø80 mm. - Upper hydraulic group with 11 KW motor. - Electrical panel with SIEMENS PLC. - Integrated control panel. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-10
压力： 7 T喉部： 180 mm行程： 100 mm工作台表面积： 300x300 mm滑枕表面： 105 mm工作台上的孔： 60 mm工作台高度： 1050 mm滑枕中的工具孔： 30 mm总功率要求： kW机器尺寸 ca： BxTxH 1200x1200x2100 mm
pressure: 20 tdistance between columns: 450 mmstroke: 100 mmtable surface area: 440x320 mmram surface: Ø140 mmhole in the table: Ø50 mmtable height: 900 mmtool hole in ram: Ø40 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: BxTxH 1400x1200x2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
压力： 25 吨立柱间距： 800 毫米行程： 100 毫米日光： 450 毫米工作台面积： 750x750 毫米机器重量 CA.： 3 T机器尺寸 CA： 1500x1500x2700 毫
压力： 100 吨喉部： 275 毫米行程： 150 毫米台面面积： 860x550 毫米滑枕表面： 600x400 毫米台面高度： 810 毫米滑枕中的工具孔： 50 毫米日光： 最大 475 毫米机器重量 导管： 7 吨机器尺寸 导管： BxTxH 2000x2500x3300 毫
pressure: 100 tdistance between columns: 625 mmstroke: 150 mmtable surface area: 580x450 mmram surface: 580x340 mmhole in the table: Ø 150 mmtable height: 850 mmtool hole in ram: Ø 45 mmcolumn travel -side: 200x200 mmweight of the machine ca.: ca. 6,0 tdimensions of the machine ca.: BxTxH ca. 1300x1300x2750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
压力： 250 t立柱间距： 900 mm行程： 300 mm台面面积： 850x900 mm滑枕表面： 800x880 mm行程： 300 mm台面高度： 1050 mm
压力：400 t行程：300 mm工作台夹紧面：1200 x 700 mmRam 面积：1200 x 700 mm安装高度：500 mm行程调整：300 mm缩回力：348 kN顶出力：100 kN顶出器提升：100 mm总功率要求：65 kW机器重量约：28 t机器尺寸 L x W x H：4.4 x 2.75 x 4.0 m= 框架压力机配件：换刀台 - 下一个 UVV 测试根据印章 05/2021 -- 带切割冲击阻尼阻尼力 4000 kN 阻尼行程 5 mm 主轴调整 200 mm此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的机器管理
