挤出机 二手 出售 (297)

TECOM BLOWN FILM EXTRUDER, for LDPE-RLDPE blends, Contrex feeding, 2 gravimetric components + 1 volumetric dosing units, Screw diam.70 mm 30 L/D, Rotating head, Low neck, 1.600 mm pull off unit, gusseting unit, Cason corona treatment, single color printer (for marks), 1.600 mm double collection frame, BRA 36+ Eurochiller, Connected and running., conditions: used - running, working width: 1600, availability: February 2026

EREMA 1109 TVE PLUS, Complete regranulation line for LDPE LLDPE HDPE PP PS, Throughput rate 400-500 kg /h depending on materials, Including:, loading conveyor belt, tunnel metal detector, compacting unit, extruder with 90 mm.screw Ø, double piston, backflush screen-changer, double degassing unit,, water ring pelletizer, stainless steel centrifugal dryer, closed cycle water flow, electric cabinet for full management, 44.500 worked hours, in production, Users manuals, CE compliance declaration, Electrical drawings available, capacity: 400-500 kg/h depending on materials, conditions: very good conditions - now disconnected , type: compact line from scraps to granule, highlighting: The Erema lines are particularly appreciated for the high efficiency production/consumption and for the screening which happens before degassing.

EREMA INTAREMA 1309 TVE plus SD, Complete regranulation line for LDPE LLDPE HDPE PP PS, Throughput rate 480-750 kg /h depending on materials, Including:, loading conveyor belt, tunnel metal detector, compacting unit, extruder with 90 mm.screw Ø - first part of screw is in new plasma welding., double piston, backflush screen-changer, double degassing unit,, water ring pelletizer, stainless steel centrifugal dryer, closed cycle water flow, electric cabinet for full management, 3 years of work (26.365) hours with commercial LDPE washed and dried yielding 500-600 kg/h, The line is in very good conditions, Users manuals, CE compliance declaration, Electrical drawings available, capacity: 480-750 kg/h depending on materials, conditions: very good conditions - now disconnected , type: compact line from scraps to granule, highlighting: The Erema lines are particularly appreciated for the high e ...

CDM PREALPINA USED EXTRUSION LINE, for HDPE LDPE LLDPE PS PC ABS PP, nominal throughput rate 380 kg/h (depending on material and feeding rate), ABB Main drive 117 KW 380 V 50 H 3Ph (65% used in work), loading hopper, extruder with heaters and vents, fitted with a 105 mm Ø screw 40 L/D, n.1 vacuum degassing pump, semi-automatic non-stop hydraulic screen-changer (200 mm Ø)complete with hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet, CE compliance, User’s manuals, Electrical drawings, The line is offered either CHECKED or RECONDITIONED to various extents., capacity: 300-430 kg/h nominal

TECNOVA 回收挤出机，改装。Mini 60 mm，用于PE PP废料，吞吐量约127 kg/h，缓冲筒仓，强制送料单元，直径60 mm挤出机，35.3千瓦驱动，半自动换片机，水环颗粒机� ��干燥离心机，全机管理用电柜，机器提供翻新，装� �功率：工作用电约60-65%：35.3千瓦，容量：127 kg/h，视材料而定。 使用状况：二手，翻新，类型：单螺丝PE PP ABS PS PC回�

TECNOVA 回收挤出机，改装。迷你60毫米，用于PE PP废料，吞吐量约127公斤/小时，缓冲筒仓，强制送料� ��元，直径60毫米的挤出机，35.3千瓦驱动，半自动换� �机，水环颗粒机，干燥离心机，全管理电动柜。装机 -工作用电：约60-65%：35.3千瓦，产能：127公斤/小时，� ��材料而定。 条件：在良好条件下使用�

CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing fo ...

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

FIMIC RAS+REF 400全自动筛网更换器，筛网面积1.206平方厘米，适用� �PP / LDPE / LLDPE / HDPE / PS/EPS / ABS / PVB，可能设置为：连续刮削或在安培阈值上刮擦或反� ��，安装在挤出机上，输出800 kg/h，过滤100-150米，始终作为RAS（REF设备全新使用）� �驱动功率30千瓦，2024年由制造商全面检查， 即时可用，远程连接（工业4.0），通过讲坛的压力控� ��系统，4-5个备用激光滤光片，多极插头连接器，我� �可以为这台机器提供备用屏幕�

主要瓦楞纸的模具块，经过经过验证的原厂质量精密� ��程，外径范围：4.5 mm.ID 至500毫米外径，快速交付，高精度，耐用可靠，贴合� ��确，定制零件极具灵活�

以下是欧盟建筑商提供的管道和型材挤压设备列表。� ��设备由知名德国制造商制造，二手设备处于良好工� �状态。请查看下方PDF列表，并及时联系我们咨询。如 有疑问请非常具体，并请别忘了提供您的完整联系方� ��， 您的姓名、公司名称、国家、WhatsApp和电话号码。我� �很乐意为你提供帮助�

旋转筛网，采用Aisi304不锈钢结构，曾操作160毫米挤压 线，不锈钢筛网，孔径17毫米，2个缓冲和优质材料出� ��，0.25千瓦电机，Bonfiglioli变速箱，装载料斗305 x 505毫米，条件优良，装机功率-工作用电量：约60-65%： 0.25千瓦，供应：立即，条件优�

PREALPINA CDM挤出线105毫米绞线，硬塑料装载料斗（可根据要求� ��装送料螺杆），带螺杆的挤出机，105毫米35升/直流� �，直流电机117千瓦，400伏3Ph.50赫兹，半自动，不间断 液压筛网更换器，液压包装，绞板模具，冷却浴，空� ��干燥隧道，绞线颗粒机，振动分级机， 该线路提供翻新状态，从确认起可供应6周，可选：不 同切割、不同筛网、上下游设备，承载能力：400公斤/ 小时，条件：重新整修�

压迫送料单元，经过翻新。该单元可与缓冲筒的送料� ��杆及挤出机水平螺杆同步，实现均匀连续送料，适� �于轻质废料，安装于130毫米挤出线上，完全翻新，可 能添加搅拌批次送料机，供应情况：库存充足，条件� ��翻新，类型：支持最高700公斤/小时挤出�

PRT水环颗粒器，适用于PE PP PS PC ABS，额定产能600-700千克/小时（含PS测试最高900公斤） ，N.4切割刀片，N.1温调节区，加热功率8.00千瓦，切割 电机功率4.00千瓦，N.1水泵，热交换单元，单水泵功率 3.00千瓦，垂直离心机功率5.50千瓦，蒸汽真空功率0.25� ��瓦， 隔音放电旋风器，总装机功率20.75千瓦，建于2006年，� ��200小时工作，条件优良，装机功率——工作用电量� �60-65%，20.75%，状况：如新，供应：即时，容量：最�

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, for PE PP ABS PC PS, compounds, masterbatches, Average throughput rate 600 kg/h depending on material and feeding rate, spare : 2 screws and 1 barrel reconditioned to 100% performances, Mounted: screws + barrel in very good conditions, n.1 dosing unit with hopper, N.2 vacuum degassing points, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, on separate request), hydraulic pack, fitted with strand die (available with water ring pelletizer on request) + stainless steel cooling bath with heat exchanging unit + air-blowing dryer, electric cabinet (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The line is offered totally or partiall ...

FIMIC RAS 325反冲洗，全自动滤网更换器，仅支持反冲洗，因此� ��染率低于5%，免用刮片，免激光滤网费用。使用标准 网，容量与筛网相关——250 μ网，最高700公斤/小时，连接测试，提供全面翻新，� ��备新控制面板（或仅附图纸）， 供应时间：4-5周，最大容量：500-600公斤/小时，条件� �全面翻新，类型：全自动——反冲�

PLASTIMAC实验室挤出机，用于吹制薄膜，适合颗粒测试� ��螺丝直径25毫米，直径70毫米模具，500毫米收集框架� ��7.5马力驱动，完整的支撑结构，（如有需要，可单� �购买电冠处理+小型打印机），装机功率 - 工作用电量：约60-65%：7.5马力，工作宽度：500毫米，� ��件良�

VENANZETTI COOLING TOWER, for granule. This system allows to cool the granule after extrusion with little space taken, READ CONSTRUCTORS DESCRIPTION :, Spiral elevators, The spiral elevator is the perfect solution for moving a product upwards while simultaneously treating it thermally in very small spaces., The conveyor surface is a rising helicoidal trough, or rather a spiral with a constant pitch. The width of the trough is determined by the difference between the helicoid’s external and internal diameter. The product moves upwards on the conveyor by means of an oscillating thrust movement with controlled frequency and amplitude, and the direction is inclined in order to throw the product upwards., The advantages of this solution are:, -, very small layout space;, - thermal treatments while the product is on the conveyor (heating, cooling, drying, curing, etc.);, - speed on the conve ...

GAMMA MECCANICA GM 125 COMPAC - 完全翻新，挤出线带预压实机，标称产能率为700-800 KG/h，具体取决于材料类型和进料速率，平均能耗：0.2 5-0.30 KWH/KG，产品线包括：装载带、隧道金属探测器、带投� ��单元的压缩机、直径125毫米螺杆、35升/日的挤出机� �氮化螺杆和槽体，条件良好。该线路使用LDPE薄膜和PP L非织造、半自动、不间断液压滤网更换器、油动包装 、水环颗粒、干燥离心机、回收水箱�

全自动可采用半自动模式，按需开启小批量，无需（� ��班节省一人），维护成本低（无圆盘，只有可重新� �利的刀具），大多数废料无需减小尺寸。适用于薄膜 +泡沫+纤维，耐受湿度和部分污染。相比其他系统，� �种脱气效果最好。通过调制解调器远程辅助，枪管直 径1500毫米，长×宽×高4.3 x 2.3 x 5,050米，570千瓦，安装功率370千瓦，带检查门的钢制� �筒壳体，侧�

这台莱斯特里茨ZSE60MAXX-48D于2012年制造。这是一款共� �双螺杆挤出机，专为高性能复合先进聚合物材料（包 括可降解聚合物）而设计。它适应多种挤出工艺，非� ��适合生物塑料、母批生产或特殊配制。如需了解更� �关于这台机器的信息，请联系我们�

FIMIC RAS 325刮刀，全自动筛网更换机，筛网面积77.900平方毫米� ��吞吐量：根据材料和污染程度最高可达600公斤/小时� ��配备刮除系统，适用于挤压线，产能可达约500公斤/� ��时或更高，视筛网而定。仅断开连接，条件优良，20 23年制造，立即可用。我们可以有竞争力的价格为该� �器提供备用筛网。 激光筛网范围为80至300 μ - 网状厚度为180至50，冲孔筛网范围为400至2000 μ - 网目范围为40至10，容量：600公斤/小时，具体取决于� �料和网格，供应情况�

Gamma Meccanica 105毫米，40升/日，适用于LDPE HDPE、PP、ABS、PC、PS，标称吞吐量为300-400千克/小时，� ��体取决于进料速率和材料，平均能耗：0.23-0.28千瓦� �/kg，包括缓冲筒供料螺旋输送机，配备105毫米螺丝40 LD，真空脱气泵110千瓦交流驱动，带变频不停液压筛� �开关（可配备[全自动筛网开关]（.germanplast/listings/761 0249-used-fimic-ras-325-automatic-screenchanger））水圈颗粒剂� �燥离心机电气柜用户手册和图纸于2000年建�

NGR S-GRAN 65 VHD，建于2011年，经过良好检查，包括：装载输送带、 隧道金属探测器、密密机、带65毫米螺杆的挤出机、� �气点、液压筛网更换器、水环颗粒机、干燥离心机、 带气旋器和袋支撑结构的排气口。状况：使用、检查� ��类型：紧凑型回收管�

GAMMAMECCANICA TANDEM SYSTEM 125 mm. 950 kg/h double screening, Throughput rate up to 600-950 kg/h ca, depending on material and feeding rate only 0,30-0,40 Kwh/kg., Line suitable for the recycling for heavily printed, high humidity and contaminated materials., High performance degassing chamber for removal of up to 10 times more gas and humidity in the melted material compared to other systems (so you save on the cost of an agglomerator), The line includes :, Loading conveyor belt, tunnel metal detector, automatic compactor, N.2 Dosing unit for masterbatches and more, 1st extruder with 125 mm. screw Ø 28 L/D, 1st degassing point, FIMIC RAS 500 fully aumatic screenchanger, control cabinet, 2nd extruder with 140 mm. screw Ø 18 L/D, 2nd degassing point, BD-PLAST non-stop screen-changer, TDA6 GM water ring pelletizer, heat exchanging unit, vibrating screen, blower, Water treatment unit ,  ...

EREMA 回收线用于 PE PP，RM80E 型，建于 2004 年，包括：装载金属探测器、压实机、挤出机 85 毫米螺杆、不间断液压换网器、水环造粒机、麻袋站� ��电柜、可用性：立即，条件：储�

用于LDPE的CMG-MAM吹膜挤出机，螺杆直径80毫米的挤出机 ，生产率约150公斤/小时，旋转头模具直径150毫米，牵 引单元宽度1.200毫米，电晕处理，卷绕机毫米1.200毫米 ，最大卷筒直径1.200毫米，最小/最大薄膜宽度600/1200� ��

GAMMAMECCANICA Compac 125 毫米。1998 年建造年份 包括装载传送带、金属探测器、带卷轴驱动拖拉的压� ��机、主计量单元 Engin Plast、直径 125 毫米的挤出机 36 L/D，带直流脱气泵Ansaldo 驱动器 197 kW，总装机功率 501 kW 电机，BD plast 不间断换网器直径 200 mm，液压动力站，水环造粒机 M 8500，电气柜，机器类型：GAMMAMECCANICA PLASTIC RECYCLING LINE 125 mm�

用于 PE PP PC PS ABS 的 PRT 回收挤出机，带 85 毫米螺杆的挤出机，30 L/D，建于 2000 年 - 工作时间很少，全新 2023 FF85VE 新款 2023 FF85VE，60 kw 西门子驱动 2.200 rpm，平均吞吐量 200 kg/h，取决于材料和进料率，加热器总功率 38,6 kw，N.1 真空脱气泵， 手动换网器，2023 年新水环造粒机 WF150，干燥离心机，总装机功率切割组 14 kw，振动分级机，总重量约 3 吨，条件极佳，材料：PE PP PC PS ABS PS，容量：约 200 kg/h，具体取决于材料�