压力机 二手 出售 (304)

销售供家具元件安装RAMARCH PN31T使用的车身压力机。建造年份 1997. 材料尺寸 2500 x 1300 x 600mm 带后部运输轨道的版本，用于成品元件。 电动气动操作。 制造商：西班牙拉马奇。（但已经是DYNMA） 非常好的条件。可用相同�

销售供家具元件安装RAMARCH PN31使用的车身压力机。建造年份 1998. 材料尺寸 2500 x 1300 x 600mm 电动气动操作。 制造商：西班牙拉马奇。（但已经是DYNMA） 非常好的条件。可用相同�

销售供家具元件安装RAMARCH PN31使用的车身压力机。建设年份 2002. 材料尺寸 2500 x 1300 x 600mm 电动气动操作。 制造商：西班牙拉马奇。（但已经是DYNMA） 非常好的条件。可用相同�

1- 一种叠层组合， 转弯和卸载 2- BTF 多翼 3- 多引脚系统 使用面积 1330x2630 毫米 板材最大尺寸 1250x2550 mm 最小箔片宽度 1400 毫�

产能 3 吨/小时 电机功率 200Kw 模具直径 1000 mm 滚轮数量 5

press capacity:950 kNcontrol:Siemens S7 Required air-pressure:6 barloading area:1200 x 600 mmPressure power:1000 kNtotal power requirement:18 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:2600 x 1300 x 3100 mm

Motor power [kW] 7.5 Filling opening width [mm] 1500 Filling opening height [mm] 750 Bale length [mm] 780 Bale width [mm] 1500 Bale height [mm] 1000 Waste type: Paper/cardboard Auction-ID: A1-40974-46

Machine is not working Main Motor Power: 15KW Width of filling opening: 1600mm Filling opening length: 740mm Auction-ID: A1-40974-18

Used machine - completely overhauled - ready to use, no costs to be expected! BRIQUETTING PRESS Model No. E55 Year: 2010 Briquette diam. 55 mm, Engine kW 5.5 (High Efficiency). Production from 15 to 60 Kg/h. Dimensions: H 1.510 mm, 1.700 mm, 1.170 mm. Kg 600. Technical characteristics: Oleodynamic machine; No. 7 Cycles per minute approximately with the machine at full speed; 3 cylinders; 1 Monobloc vice; Maximum length of each expulsion 50 mm; 1 capacitive probe for working in automatic mode; 1 viewfinder; Ferrum diam. 1,000 mm. Capacity capacity ~ 0.73 m3; End-of-cycle device; Electronic pressure gauges, pump and vise; PLC Touch Screen Siemens; Siemens Display; hour meter; Inductive limit switches; Machine position control by LED; Stamping head; Preheating system; Oil and temperature level sensor; Current Stabilizer; Service keys; Voltage 400V – 50 Hz Standard Paint: Structure RAL  ...

Production: 30 to 60 kg/hBriquettes:Diameter: Ø 55 mmMotorization:Pump motor power: 5.5 kW / 7.5 HPPower supply: 380 V / 50 HzHydraulic:Briquette cylinder Ø 120 mmPushing power: approx. 700 kg/cm²Drawer cylinder Ø 40 mmMechanical elements:Cylindrical ferrule Ø 1,000 mmMachine dimensions:1,650 × 1,150 × 1,460 mmWeight: 830 kg Auction-ID: A1-45443-77

Machine: Briquetuse Briquette Ø: 50 mm Output: 30 - 50 kg/h (depending on material) Engine: 5.5 kW Voltage: 400 V, 3 Ph Consumption: 15 A Fuse protection: min. 16 A Cable cross-section: 6 mm² (≤10 m) Hydraulic power unit: capacity 100 L Weight: 700 kg Auction-ID: A1-45443-29

- Hydraulic drive. - 1.50 KW motor. - Approximate maximum dimensions of the can: height 570 mm, diameter 350 mm. - With safety device. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44896-16

- Total installed power 1.50 KW. - Maximum work surface approx. 6000 x 1650 mm. - Maximum wood thickness approx. 80 mm. - 12 vertical hydraulic pressure clindros. - 8 front clamping bars of the parts with 2 pneumatic cylinders each. - Hydraulic group of 1.50 KW-1420 rpm. - Possibility to work in 2 zones independently. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-3

- Dimensions of the work table approx. 2200 x 1200 mm. - Maximum workpiece dimensions approx. 1950 x 1000 mm. - Perforations in the table every 60 mm in the 2 directions. - 5 positionable hydraulic clamping cylinders. - 1.50 KW-1400 rpm hydraulic pump. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-11

- Total installed power 1.80 KW. - 3 x 2 vertical pressure cylinders. - 2 x 2 horizontal pressure cylinders. - 2 independent work areas. - Maximum pressing dimensions approx. 2350 x 600 x 1200 mm. - Working pressure: 0-100 kg/cm². - Operating conditions of this machine: unchecked. - Dimensions for transport approximately XXXX x XXXX x XXXX mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-4

板尺寸：2200 x 1100毫米 日照开口：350毫米日照数：1 立刻 加热：elektrisch 比压：kg/cm² 总压力：65 至 电机输出：1.1 kD 模型（L/W/H）：2540 x 1280 x 1900 mm 机器重量约2500公斤 年份：年份：本广告数据使用 ModulMWS——LogoTech oHG 的软件解决方案�

Defects: air leakage (upper frame); incomplete cycle; oil leakage on hydraulic cylinders; machine not operated for ~6 years; further faults possible; sold for repair/parts Auction-ID: A7-40551-25

Press force 5 tons Auction-ID: A3-43501-20849

Veneer press Orma Table size 2500x1300 Press force 90 to. Built in 1993 Heating plates top/bottom from foundation, dismantling and loading by the buyer Auction-ID: A7-40841-22

长度：2.800毫米，宽度：600毫米，高度：1.800毫米。压 制气缸数量：6个 Stk.work，最大高度：约1,000毫米。实心气动胶合机，带 穿孔板，便于压榨气缸的灵活排列。一个没有压力蹄� ��气缸。该广告的数据是用ModulMWS——LogoTech oHG的软件解决方案——创建的�

宽度：3.000毫米，高度：1.900毫米，长度：800毫米，气 动胶合机FEDERHENN MASCHINEN型99.98，配备墓碑十字架最终组装设备。该压� �模块化且可移动，可转换为不同压机任务。该广告的 数据是用ModulMWS——LogoTech oHG的软件解决方案——创建的�

Dimensions (L/W/H): 2920x980x1450 mmWeight: 1500 kgTotal power requirement: 11,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1400x2450x2800 mmTotal pressure: 400 toweight of the machine ca.: 12000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2950x1550x2950 mmWeight: 4000 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2960x1500x2000 mmWeight: 4000 kgTotal power requirement: 19,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3940x1620x2130 mmWeight: 5760 kgTotal power requirement: 32,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1650x2250 mmWeight: 7900 kgTotal power requirement: 54 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3050x760x2100 mmWeight: 400 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.