Column jib crane, overhead crane, workstation crane -Manufacturer: Abus, Column jib crane type LS -Documentation: Crane inspection log available -Base plate: 600 x 600 mm -Load capacity: 500 kg -Chain hoist: Abus type GM 2 500.4-2 -2x lifting speed: 4.0/1.0 m/min -Reach: 3000 mm -Total height: 4180 mm -Hook height: 3100 mm -Swivel range: 270° -Transport dimensions: 4180/800/H710 mm -Weight: 428 kg
ABUS室内起重机 500公斤 描述： 出售的是2008年市场领先品牌ABUS（HB系统型号系列）的 专业独立式轻型起重机系统。 该系统维护良好且干净，直接源自持续运行，非常适 车间、锁匠、汽车车间或焊接车间，能够精准且轻 地搬运高达500公斤的货物。 技术数据与细节： 制造商起重机和提升机： ABUS Kransysteme 有限公司 模型起吊： 原装ABUS ABUCompact电动链条提升机（工厂编号05 08 0598 / 02） 载重能力： 最大500公斤（舰桥上有官方ABUS标记） 类型： 由实心I型钢梁制成的独立立柱结构。不需要天花板或 墙体安装！ 施工： 高强度螺丝连接，配有大型加楔板和额外的斜撑杆， 实现最大静态安全性。 落地安装： 桥墩配有厚底板，用坚固的木钉固定在走廊地 ...
柱式转向起重机 ABUS VS -载重能力：1250公斤 -投影：5000毫米 -整体高度：4040毫米 - 柱子和支架涂色：RAL 1007水仙黄 - 起重机分类：H2/B3 - 工作电压：3/N/PE~50 Hz 400 V -直接控制 -旋转范围：名义上是n乘以360° 包括： - ABUS电动链式提升机 -型号：GM 4 1250.4-2 -2股 -载重能力：1.25吨 -钩距：3000毫米 - 最高钩位：3000毫米 净价 = 7.500,00€ 总价 = 8.925,00€ 您将收到带有增值税的发票
Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.5 m -Electric chassis: Abus S11148 34/153 rpm -Beam width: max. 310 mm Dimensions: see photo and technical drawing -Electrical accessories: Connection cable (see photos) -Transport dimensions: 450/780/H400 mm -Weight: 56 kg
Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control, radio remote control, radio remote control, radio transmitter -Manufacturer: ABUS, radio remote control with transmitter and receiver for crane remote control -Type: ABURemote AR611 -Scope of delivery: as shown in the pictures, plug/connection cable (without remote control). -Dimensions: 570/510/H180 mm -Weight: 5.5 kg
Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Abus, electric chain hoist with powered chassis -Chain hoist: Abus type GM4- load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.3 m -Electric chassis: Abus EF14 -Carrier width: max. 340 mm -Dimensions: see photo technical drawing -Electrical accessories: connection cable see photos -Transport dimensions: 900/700/H340 mm -Weight: 63 kg
Geared motor, electric motor, three-phase motor, electric geared motor -Power: 0.1/0.75 kW -Speed: 12/53 rpm -Voltage: 380 V -Design: B3 -Shaft: Ø 39/50 mm/Ø 35/80 mm -Protection class: IP54/55 -Brake: 1.8 Nm -Quantity: 1 piece -Dimensions: 760/220/H265 mm -Weight: 51 kg
Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley -Manufacturer: Abus, 3 pieces cable trolley plastic with polyamide rollers -Type: flat cable -Shipping/Price: complete -Dimensions: 90/70/H75 mm -Weight: 0.1 kg/piece
Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley -Cable trolley: Cable trolley with polyamide rollers -Type: Round 10-16 mm -Number: 1 cable trolley available -Dimensions: 80/80/H93 mm -Weight: 0.1 kg
Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Abus, crane chassis with electric cable winch -Cable pull: Type GM1032FD -Load capacity: 3200 kg -Main stroke/fine stroke: 5/0.7 m/min -Hook path: 6.0 m -Roller spacing: 1400 mm, dimensions see photos -Drive system: Abus -Accessories: Connection cables, without crane operation -Transport dimensions: 1550/1180/H530 mm -Weight: 512 kg
Jib Crane, Column-Mounted Crane, Column Jib Crane, Crane 250 kg, Used Machine Manufacturer: Abus Load Capacity: 250 kg Column Height: 2900 mm Reach: 2600 mm Hoist: Demag, Chain Hoist Type: DKUN 2-250 K V2 Load Capacity: 250 kg Lifting Height: 2600 mm IP Rating: IP 55
- Arm length 3000 mm - Column diameter 406 mm - Lifting capacity 2000 Kg - Rotation speed 550 / 2660 U/Min
- 双提升机 60 + 60 吨 - 提升级别 H2 - 频率变化速度 - 起重 ABUS GM 7600U6 - FEM Group 1Am - Ikusi 遥控器（TM70 2.13）- 使用频率低 / 动力不足 / 直接可
柱式转向起重机 LS 200型 - Abus 载重能力：1000公斤 柱高3100毫米 投影面积3000毫米 尺寸：英国尾梁 2600毫米 1998年 起重机分类 - DIN 15018 H2B2 走廊操作通过按钮按钮 控制 - 电控 猫式起落架——手工 吊车 - 链条吊车 - Abus GM 3 1000.4-211 F4 升力速度：4.00 / 1.00 米/分钟 原版克兰书 柱子和横梁大修并重新喷漆 电源扁平电缆 - 新款 基础板 BTTO 380公
ABUS类型VS - 1000/5,0（406） 总高度：3.65米 下边缘高度3.30米 柱径 stlpa 406毫米 投影5000毫米 钩子行程 2900 毫米 BTTO 941 [kg] 旋转360度 [°] 链条提升机ABUS GM 3，起重速度1/4米/分钟，催化转换器电机。动力驱动 原始起重机手册及检查记录 最后一次考试 2025 新喷漆 列号RAL 7038浅灰色 Boom RAL 1007 - 水仙黄 当前价格 - 新款10.580欧元 ——不含包装、运输和增值税。 - 照片 - 大修前的原始状态
weight max.: 10 t stroke: ca. 6000 mm clamping width: ca. 7.500 mm control: FUNK travel: ca. 13.000 mm length: ca. 14 - 15.000 mm height over floor: ca. 8.000 mm support x-fold: 6 x IPE 280 total power requirement: 11,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: ca. 14,5 8 8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 1 t stroke: / mm clamping width: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 250 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4.025 mm swivelling range: 270 Grad Total weight, approx.: 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - t ...
weight max. in kg: 500 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4215 mm swivelling range: 270 Grad Total weight, approx.: 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size L ...
weight max. in kg: 1000 kg arm length: 4000 mm height: 3000 Unterkante Ausleger total column height: 3790 mm swivelling range: 270 Grad Total weight, approx.: 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) ...
weight max.: 2 t stroke: 4000 mm clamping width: 9200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Hoist Demag Bridge traveling crane The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
arm length: 6000 mm weight max. in kg: 250 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.23 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
arm length: 4000 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Boom swivels electrically. Trolley travels electrically. S 2 No.: 220007670 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software ...
