We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
usado
Capacidad de aspiración: 1500m3/h Presión Pa: 1200 Potencia del motor: 1,1 kW Voltaje: 400 V Peso: 150 kg Construido: 2002 Corriente nominal A 2.5 Frecuencia: 50 Hz Superficie de óxido: 750x500 mm Ancho: 760 mm Profundidad: 1050 mm Altura: 890
usado
Dimensiones: 3,00 x 1,50 m
nuevo
table diameter: 690 mmtable load: 0,5 tswivelling range: 0 - 90 Gradtable load: horizontal 500 Kgtable load: vertikal 250 Kgboring diameter: 100 mmtable turning speeds: 0,25 - 2,5 U/mintotal power requirement: 0,37 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
table length: 1000 mmtable width: 2000 mmtable height: 200 mmweight: 650 kgOur welding tables are manufactured with casting quality HT 300 and are nitrated in one piece after mechanical processing.Furthermore, they undergo a 3-day gas nitriding process which increases the corrosion resistance as well as the permanent fracture and vibration resistance of the tables.All our tables are equipped with adjustable legs.The minimum adjustment range is 620 mm, the maximum 665 mm.Thus, a working height of 820 - 865 mm is possible.Further details on the production and characteristics of our tables can be found in our catalogue.The illustrations do not correspond to the original size and are for llustration purposes only.The accessories shown are not included in the product.3D welding table - 3D clamping devices - 3D precision welding tableThe data for this ad was created with ModulMWS - the softwar ...
nuevo
table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight: 920 kgManufacturer: GERD WOLFFWebsite: www.gerdwolff.comTechnical Details:• Length 2400 mm• Width 1200 mm• Height 200 mm• Weight 920 kg• Hole diameter 28 mm• Hole spacing 100 mmAdvantages and Features:• 3-day gas nitriding process• Increased corrosion resistance• Weld spatter adhesion protection• Maximum load capacity• Enhanced fatigue strength• Improved vibration resistance• Fine scale engraving• Reinforcement with welded seams and ribs on the underside• Optimal working height of 820-865 mm• 6 height-adjustable support legs• Available with a matching accessory set (optional)Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology.To ensure adequate st ...
nuevo
table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight: 1500 kgOur welding tables are manufactured with casting quality HT 300 andare nitrated in one piece after mechanical processing.Furthermore, they undergo a 3-day gas nitriding process which increases thecorrosion resistance as well as the permanent fracture and vibration resistanceof the tables.All our tables are equipped with adjustable legs.The minimum adjustment range is 620 mm, the maximum 665 mm.Thus, a working height of 820 - 865 mm is possible.Further details on the production and characteristics of our tables can befound in our catalogue.The illustrations do not correspond to the original size and are for illustration purposes only.The accessories shown are not included in the product.3D welding table - 3D clamping devices - 3D precision welding tableThe data for this ad was created with ModulMWS - the software ...
nuevo
table length: 3000 mmtable width: 2000 mmtable height: 200 mmweight: ca. 1600 kgOur welding tables are manufactured with casting quality HT 300 and are nitrated in one piece after mechanical processing.Furthermore, they undergo a 3-day gas nitriding process which increases the corrosion resistance as well as the permanent fracture and vibration resistance of the tables.All our tables are equipped with adjustable legs.The minimum adjustment range is 620 mm, the maximum 665 mm.Thus, a working height of 820 - 865 mm is possible.Further details on the production and characteristics of our tables can be found in our catalogue.The illustrations do not correspond to the original size and are for llustration purposes only.The accessories shown are not included in the product.3D welding table - 3D clamping devices - 3D precision welding tableThe data for this ad was created with ModulMWS - the so ...
nuevo
table length: 4000 mmtable width: 2000 mmtable height: 200 mmweight: 2400 kgOur welding tables are manufactured with casting quality HT 300 and are nitrated in one piece after mechanical processing.For proper stability, our welding tables are reinforced underneath with welded ribs, as shown in the images.Furthermore, they undergo a 3-day gas nitriding process which increases the corrosion resistance as well as the permanent fracture and vibration resistance of the tables.All our tables are equipped with adjustable legs.The minimum adjustment range is 620 mm, the maximum 665 mm.Thus, a working height of 820 - 865 mm is possible.Further details on the production and characteristics of our tables can be found in our catalogue.The illustrations do not correspond to the original size and are for llustration purposes only.The accessories shown are not included in the product.3D welding table - ...
nuevo
diameter: 28 mmlength: 50 mmclamping range: 45-50 mmThe price is exclusive of the statutory value-added tax.Also available as D28 x 50 mm.Type: Ball Locking Pin 75 mmDiameter: 28 +- 0.02 mmMaterial: 45 # SteelHardness: HRC28-32Surface Roughness: Ra 0.8 µmThe ball locking pins from GERD WOLFF represent specialized connecting elements designed for integration into various welding table systems and fixtures.Their primary function is the efficient and precise positioning and fastening of workpieces. These pins are compatible with welding tables of all brands that have a borehole diameter of 28 mm.The unique ball design allows for flexible positioning of the workpieces at different angles and positions.Due to their high-quality construction and robust design, the ball locking pins from GERD WOLFF offer reliable holding force throughout the entire welding process.These pins ensure easy handli ...
nuevo
diameter: 28 mmlength: 75 mmwidth: mmThe price is exclusive of the statutory value-added tax.Also available as D28 x 50 mm.Type: Ball Locking Pin 75 mmDiameter: 28 +- 0.02 mmMaterial: 45 # SteelHardness: HRC28-32Surface Roughness: Ra 0.8 µmThe ball locking pins from GERD WOLFF represent specialized connecting elements designed for integration into various welding table systems and fixtures.Their primary function is the efficient and precise positioning and fastening of workpieces. These pins are compatible with welding tables of all brands that have a borehole diameter of 28 mm.The unique ball design allows for flexible positioning of the workpieces at different angles and positions.Due to their high-quality construction and robust design, the ball locking pins from GERD WOLFF offer reliable holding force throughout the entire welding process.These pins ensure easy handling, quick fixa ...
usado
Longitud de la mesa: 1050 mm Ancho de la mesa: 1050 mmCarga de la mesa: 3,6 t Mesa - Inclinable: 0 - 135 Rotación de la mesa: 360 Velocidad de rotación de la mesa: Variabel Einstellbar U/minPotencia total requerida: kWpeso de la máquina aprox.: tdimensiones de la máquina aprox.: 2,35 x 1,70 x 2,00 m
nuevo
: neu : ca. 2 Wochen ab Auftragse : 5442 €: 4897.8 €Accessory set consisting of:14 pcs. screw clamp180° HIS28Z30008 pcs. screw clamp45° HIS28Z30456 pcs. V-support HIS28VP10030 pcs. quick clamping bolt shortHIS28SB1006 pcs. connection bolt HIS28BS1004 pcs. mangnetic bolt HIS28MB1008 pcs. stop rail 150mm HIS28FA1508 pcs. stop rail 225mm HIS28FA2252 pcs. stop rail 500mm HIS28FA5006 pcs. stop angle 175mm HIS28WA1751 pc. stop angle 325mm HIS28WA325L1 pc. stop angle 325mm HIS28WA325R1 pc. support angle 600mm HIS28W600L1 pc. support angle 600mm HIS28W600R1 pc. support angle 800mm HIS28W800L1 pc. support angle 800mm HIS28W800R1 pc. cleaning brush Nylon HIS28RB1 pc. torch holder HIS28BH1 pc. tool cart HIS28WW1000and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
: neu : ca. 2 Wochen ab Auftragse : 3165 €: 2848 €Accessory set consisting of:8 pcs. screw clamp 180° HIS28Z30004 pcs. screw clamp 45° HIS28Z30454 pcs. V-support HIS28VP10020 pcs. quick clamping bolt short HIS28SB1004 pcs. connnection bolt HIS28BS1002 pcs. manetic bolt HIS28MB1004 pcs. stop rail 150mm HIS28FA1506 pcs. stop rail 225mm HIS28FA2254 pcs. stop angle 175mm HIS28WA1752 pcs. stop angle 275mm HIS28WA1752751 pc. stop angle HIS28WA325L1 pc. stop angle HIS28WA325R1 pc. support angle 800 HIS28W800L1 pc. support angle 800 HIS28W800R1 pc. cleaning brush Nylon HIS28RB1 pc. torch holder HIS28BHand 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L)OPTION:Tool cart HIS28WW1000 € 545,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
: neu : 2023 : 2506 : prompt, Zwischenverkauf v : 1318 €: 1186.2 €: 1 Accessory set consisting of:4 pcs. screw clamp 180° HIS28Z30002 pcs. screw clamp 45° HIS28Z30452 pcs. V-support HIS28VP10012 pcs. quick clamping bolt short HIS28SB1004 pcs. stop rail 150mm HIS28FA1504 pcs. stop rail 225mm HIS28FA2252 pcs. stop rail 175mm HIS28WA1752 pcs. stop angle 275mm HIS28WA124275and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L)OPTION:Tool cart HIS28WW1000 € 545,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
: neu : ca. 6-8 Wochen ab Auftrag : 1367 €: 1230.3 €: 1000 x 1000 mm: 850 mm: 450 kg: 25 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors ...
nuevo
: neu : ca. 6-8 Wochen ab Auftrag : 1634 €: 1470.6 €: 1500 x 1000 mm: 850 mm: 344 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load ...
nuevo
: neu : 2022 : 2481 : prompt, Zwischenverkauf v : 2130 €: 1917 €: 1 : 2000 x 1000 mm: 850 mm: 450 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and wit ...
nuevo
: neu : 2023 : 2499 : prompt, Zwischenverkauf v : 3091 €: 2781.9 €: 1 : 1500 x 1000 mm: 850 mm: 8000 kg: 541 kg: 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants availa ...
nuevo
: neu : 2023 : 2492 : prompt, Zwischenverkauf v : 3652 €: 3286.8 €: 1 : 2000 x 1000 mm: 850 mm: 8000 kg: 712 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants availab ...
nuevo
: neu : 2515 : Februar 2024, Zwischenver : 4699 €: 4229.1 €: 2400 x 1200 mm: 850 mm: 8000 kg: 945 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (standar ...
nuevo
: neu : 2513 : Februar 2024, Zwischenver : 6998 €: 6298.2 €: 130.37 €: 3000 x 1500 mm: 850 mm: 8000 kg: 1544 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot varian ...
nuevo
: neu : ca. 6-8 Wochen ab Auftrag : 10805 €: 9724.5 €: 201.3 €: 4000 x 2000 mm: 850 mm: 8000 kg: 712 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants avail ...
usado
características técnicas: - Capacidad de carga Tabla de posicionamiento aprox. 750 kg - Diámetro de la placa de lámina 500 mm - diámetro máximo de la pieza de trabajo 1600 mm - Tocadiscos de altura en posición horizontal aprox. 750 mm - Tocadiscos con la derecha, + carrera a la izquierda - Tocadiscos del eje rotativo sin fin 360 - Tiempo de giro por revolución 12,5 s. - Panorámica izquierda + derecha - Ángulo de rotación del eje pivote 180 - Tiempo giratorio para 180 ángulo giratorio 10 seg. - 2 x botón de pie doble para tocadiscos + brazo giratorio - hydr. Pernos de sujeción para sujetar la pieza de trabajo en el centro del tocadiscos - Carrera de sujeción / distancia de sujeción del perno de sujeción 32 mm - Prensado de fuerza de sujeción / tirando de 80 / 48.9 kN - Rosca interna del cilindro de sujeción M 27 x 40 - Control de posi ...
usado
longitud de la mesa: 1150 mmAncho de la mesa: 1150 mmCarga de la mesa: 2 tPotencia total requerida: kWpeso de la máquina ca.: tdimensiones de la máquina ca.: mMarca: JWeldingTipo: HB-20Capacidad: 2.000 kgDimensiones de la meseta: 1.150 mm øAltura de trabajo Plataforma, horizontal: 1.180 mmAltura de trabajo Plataforma, vertical: 1.000 mmDiámetro de rotación vertical: 1.550 mm øRanuras en T: 8Inclinable eléctricamente
nuevo
Tipo de máquina: mesa giratoria de soldadura Marca: Merkle / Conzelmann Tipo CD 50/25 - 320 Tensión de conexión 1 x 230 V Rango de velocidad 0.25 – 2.5 rpm, infinitamente variable Control de velocidad 1 : 10 Par 2.5 – 10 Nm Diámetro de la placa frontal 250 mm Placas frontales - paso interno 10 mm Ángulo de inclinación de la placa frontal 135 Capacidad de carga vertical 0,5 kN = 50 kg Altura de la mesa 320 mm Movimiento basculante manual, sujetable Par de inclinación 90 Nm Pantógrafo 400 A 80 % c.c. Conexión para - interruptor de pie simple - Doble interruptor de pie - Control remoto de pie Edad 3 años Estado: tan bueno como nuevo Peso 44 kg Garantía 24 meses a partir de la fecha de entrega Precio original 2.198,00 € + IVA Precio oferta 1.690,00 € + IVA Interruptor de pedal simple con cable de 3 mtr. 2 ...
usado
longitud de la placa de piso: 2500 mmanchura de la placa del piso: 1300 mmaltura de la placa del piso: 300 mmpeso de la máquina aprox.: 2800 kgDetallos: La longitud de la mesa 2500 mmAnchura de la mesa 1300 mmAltura de la mesa 300 mmPeso de la máquina aprox. 2800 kgResorio de espacio aprox. 3 X 2 con bastidor inferior aprox. 800 mm
nuevo
table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe Professional Extreme table Article no. 4-280030.XD7 has 2400x1200x200 mma diagonal arrangement of holes on the table top and a parallel oneHole arrangement in 50 mm grid on the sides.The holes have a diameter of 28 mm and the table oneMaterial thickness of approx. 24.5-27 mm. The table top is made of hardenedTool steel manufactured.The little stressed side walls are still off for reasons of costSteel S355J2 + N made. Grid lines at a distance of 100 mm make it easier for youthe structure of your device.The welding tables are provided with a scale as standard.Including 4x feet, basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe table Professional Extreme Article no. 4-280040.XD7 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides.The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
table length: 1000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight of the machine ca.: 416 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
table length: 2000 mmtable width: 1000 mmtable height: 200 mmweight of the machine ca.: 730 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
table length: 1500 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight of the machine ca.: 801 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe table Professional 750 Article no. 4-280030.P 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at a distance of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,55 tThe Professional 750 table article no. 4-280040.P 3000x1500x200 mm has aHole arrangement in a 100 mm grid on the table top and a parallel oneHole arrangement in 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has one Material thickness of approx. 24.5-27 mm and is made from high quality steelS355J2 + N manufactured.Grid lines at a distance of 100 mm make it easier for you to set up yourContraption. The welding tables are provided with a scale as standard.Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe table Professional 750 Article no. 4-280030.PD 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at a distance of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight of the machine ca.: 1517 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1374 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight of the machine ca.: 1072 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
: 0,6 t: -- mm: -- mmconsisting of:30x article no. 2-280510Quick release pin short- Clamping of 2 components- burnished- with twist lock8x article no. 2-280410.NUniversal stop 150 L - nitrided- nitrided- as standard with fine scaling on both sides4x article no. 2-280420.NUniversal stop 225 L - nitrided- nitrided- as standard with fine scaling on both sides8x article no. 2-280110.GStop and clamping angle 175 L - cast / black oxide finish- Hole / elongated hole- Cast / burnished2x article no. 2-280162.NStop and clamping angle 500 G - nitrided- Left stop- nitrided1x article no. 2-280166.NStop and clamping angle 750 G left - nitrided- Left stop- nitrided 1x article no. 2-280167.NStop and clamping angle 750 G right - nitrided- stop on the right- nitrided1x article no. 2-280910Tool trolley- painted- Permissible total weight 240 kg1x article no. 2-280164.NStop and clamping angle 500 G with turn ...
usado
longitud de la tabla: . mmanchura tablora de mesa: . mmcalimento de potencia total: kWpeso de la máquina ca.: tdimensiones de la máquina ca.: mmesa de soldadura eléctrica e inclinable
nuevo
: neu : 2468C : prompt, Zwischenverkauf v : Deutschland : 2970 €: 2380 €: 1 : 195 kg(more tools, without exact illustration)CONSISTING OF: 1x accessories car (Delivery is galvanised) 4x angle stop 350 x 20 mm 4x adjustable angle stop 250 x 20 mm 15x Adjustment clamp 4x Multi-clamp 6x Stand angle, adjustable 175 x 20 mm 2x Stand angle, adjustable 225 x 21 mm 8x Stop rail 225 x 20 mm 10x Socket bolt 15x Plug holder 4x Ball Tension Bolt 4x Claw clamping bolt 28 x 100 mm 15x Spacer ringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
usado
Tamaño de la mesa: 1500x1500mm Capacidad de carga: 6t Dimensiones totales: 1600x2500x2000mm Control hidráulico
usado
De la insolvencia: Fabricante de la plataforma giratoria de soldadura desconocido 3 mandriles de mordaza de 200 mm máx. 65 mm Rotación en el sentido de las agujas del reloj y en sentido contrario a las agujas del reloj Interruptor de pedal Giro 90-45° Velocidad ajustable por potenciómetro Altura ajustable de aprox. 800-1000 mm
usado
Mesa de extracción de humos de soldadura Mesa de soldadura DCE UMA150HG5 desempolvado Mesa de soldadura con aspiración integrada con filtro Fabricante de colectores de polvo para equipos de control de polvo Tipo UMA 150H G5 Descansa según fotos
nuevo
table length: 2000 mmtable width: 1000 mmtable height: 920 - 1000 mm: 2000 kgheight of stroke: max. 1525 mmtotal connected load: 1,5 kWconnected load frequency: 400 Vweight of the machine ca.: tWelding table on lifting table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmRibbed bottom for reinforcement.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
número: 21 Posiciónpeso: 22 kgcondición: neu 04 uds. Altura de sujeción de sujeción 300mm, proyección variable6 piezas. Pernos de sujeción4 uds. Stop 150mm2 piezas. Ángulo de parada y sujeción 175mm1 ud. Soporte de quemador1 ud. Spray antiadherente 500ml1 ud. Limpiador de mesa de soldadura sobre una base natural y biológica
nuevo
number: 43 Positionenweight: 40 kgcondition: neu 0Basic set 3 / 43 piecesfor table top thickness 15mm and 25mm6 pcs screw clamps12 pcs. quick clamping bolts6 pcs. universal stop 150mm6 pcs. universal stop 225mm2 stop and clamping angles 175mm2 stop and clamping angles 275mm2 pcs. prisms 60mm1 piece torch holder1 pc. Eccentric stop 100mm diameter1 piece perforated brush 30mm2 pieces separating lotion 500ml, on a natural, biological basis2 pcs. Welding table cleaner 500ml, on a natural, biological basisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
number: 53 Positionenweight: 45 kgcondition: neu 0Basic set 4 / 53 piecesfor table top thickness 15mm and 25mm6 pcs screw clamps14 pcs. quick clamping bolts2 pcs. universal stop 100mm6 pcs. universal stop 150mm6 pcs. universal stop 225mm2 pcs. universal stop 300mm6 stop and clamping angles 175mm4 stop and clamping angles 275mm2 pcs. prisms 60mm1 piece torch holder1 pc. Eccentric stop 100mm diameter1 piece perforated brush 30mm2 pieces separating lotion 500ml, on a natural, biological basis2 pcs. Welding table cleaner 500ml, on a natural, biological basisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.