BOY used machine for sale

This injection moulding machine from Dr. Boy is in good condition. The machine is from 2007 and has few working hours. Brand: Dr.Boy GmbH & Co.KG Model: 55M Year of construction: 2007 Clamping force: 55 T Screw diameter: 32mm Shot volume: 96.5 cm³ Working hours: 24,210

We have in our workshop and awaiting refurbishment this BOY 22D. The machine is a compact 22 tonne clamp machine with a very easy to use controller with the Dipronic system. These machines have stood the test of time and remain very popular as they are simple to use, cheap to repair and reliable. Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Category: Injection Moulding ID: 12646 Manufacturer: B ...

Awaiting refurbishment at our works in Wellingborough, Northamptonshire is this high precision BOY 12A injection moulding machine. Fitted with the Procan controller. The 12A from BOY is one of the most common small moulding machines we see, it is extremely accurate while still maintaining versatility with tooling and familiar control setup. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Category: Injection Moulding ID: 12882 Manufacturer: BOY Model: 12A Datasheet (PDF): View Here Viewing: Not yet refurbished Conditi ...

Awaiting refurbishment at our works in Wellingborough is this BOY 30M machine with Procan controller. These 30 tonne clamp machines from BOY are some of the smallest (footprint wise) available on the market. The 30M’s are a rarer variant of the market leading BOY 22. The key difference, aside from the uprated clamp force, is that the 30M’s have larger platens and a four tiebar design, allowing for greater versatility. Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get th ...

Now fully refurbished by the team at STV Machinery is this BOY 22M VH injection moulding machine. This machine was manufactured in 2002 with very low 12,187 run hours. It is fitted with a 24mm screw. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Category: Injection Moulding Latest Refurb ID: 12066 Manufacturer: BOY Model: 22MVH Datasheet (PDF): View Here Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2002 Clamp Force (t): 22 Screw Diameter (mm): 24 Max Shot Weight (PS)  ...

Key data: 220 kN

Boy 22M / Machine in very good technical condition Year of construction: 2004 Injection unit: Screw diameter: 28 mm Spray weight: 47 g Spray pressure: 1069 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 22 t Tie bar spacing: 254 mm Size of clamping plates: 220x400 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan MD - Touchscreen Additional equipment: Machine in very good technical condition Air valve x 1 Injection unit hardened - Bimetal Operating hours: 34,000 in automatic mode Metrics: Weight: 820 kg Length/Width/Height: 2.28x0.81x1.62 m Drive: Pumps/motor: 5.5 kW Heating capacity: 5.8 kW Total power: 11.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our comp ...

Key data: 350 kN

Boy 35A VV Year of construction: 2005 Injection unit: Screw diameter: 28 mm Spray weight: 55.8 g Spray pressure: 1577 bar Dosing volume: 58.5 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 280x254 mm Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan CT - Touchscreen Additional equipment: Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Metrics: Weight: 1350 kg Length/Width/Height: 2.06x0.95x2.74 m Drive: Pumps/motor: 7.5 kW Heating capacity: 5.8 kW Total power: 13.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 550 kN

Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 17,083 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All off ...

Key data: 900 kN

Boy 90 M Year of construction: 2004 Injection unit: Screw diameter: 42 mm Spray weight: 193 g Injection pressure: 1724 bar Dosing volume: 214.7 ccm Clamping unit : Clamping force: 90 t Tie bar spacing: 430x360 mm Size of clamping plates: 635x610 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan - Touchscreen Additional equipment: Euromap 12 Robot Interface Air valve x 1 Metrics: Weight: 3100 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 11.3 kW Total power: 26.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 550 kN

Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All of ...

Key data: 550 kN

Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition Year of construction: 2016 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 18,153 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All off ...

Awaiting refurbishment by our team at STV Machinery in Wellingborough, Northamptonshire is this 2002, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller and 36mm plasticising unit. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free op ...

This Dr. Boy injection molding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. – Brand: Dr. Boy – Model: 80M – Year built: 1996 – Screw diameter: 42mm – Shot volume: 200 cm³ – Closing force: 80T – Working hours: 24,222

This injection molding machine from Dr. Boy is in good condition. The machine is from 2022 and has few working hours. – Brand: Dr. Boy – Model: XS – Year of construction: 2022 – Screw diameter: 18 mm – Shot volume: 15.3 cm³ – Closing force: 10 T – Working hours: < 25

Key data: 900 , 252 , 48

Our team are currently working on this 2008, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel and single core pull and two 16A sockets. It has only 35,000 recorded run hours. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault  ...

Key data: 500 , 115 , 38

1 x Boy 50T2 Year of construction 1992 Clamping force: 50 to. Screw diameter: 38 mm only 15,028 operating hours! 1 x Boy 50M Year of construction 1991 Clamping force: 50 to. Screw diameter: 38 mm only 18,656 operating hours! Both machines are in good condition, and haven´t been in production very often!

BOY 90A (102) Description Without funnel General information Item number: 102 Availability: In stock Year of construction: 2006 Brand: Boy Specifications Injection weight: 193 g Clamping force: 900 kN Screw diameter: 42 mm Spray pressure: 1724 bar Tie bar distance: 430x360 mm Clamping plate size: 635x610 mm Tool installationheight min.: 250 mm Control: Procan CT Language: German Power: 26.3 kW Operating hours: 15070 h Weight: 3100 kg Dimensions: 4.9x1.2x2.1 m Funnel: No

Key data: 550 , 92 , 32

Manufacturer: Boy Type: 55 AVV Year of construction: 2012 Control: Procan ALPHA Clamping force: 550 kN Type of lock: Hydraulish Spar spacing: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance: 300 mm Plate spacing max.: 550 mm Screw: 32 mm Stroke volume: 96.5 ccm / 92.3 gram HP Injection pressure: 2127 bar General Motor: 11 kW Heating: 7,7 kW Dimensions: 3 m x 1.2 m x 3.7 m Weight: 2700 kg Screen text: German / English / French Additional equipment Robot interface

Key data: 550 , 92 , 32

Manufacturer: Boy Type: 55 MVV Year of construction: 2008 Control: Procan MD Clamping force: 550 kN Type of lock: Hydraulish Spar spacing: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance: 300 mm Plate spacing max.: 550 mm Screw: 32 mm Displacement: 96.5 cc Spray weight PS: 92.3 gram HP Spray pressure: 2127 bar General Motor: 11 kW Heating: 7,7 kW Dimensions: 3 m x 1.2 m x 3.7 m Weight: 2700 kg Screen text: German / English / French Additional equipment Robot interface

BOY 35ton Injection Moulding machine Model 35E Horizontal 415V, 50Hz Year 2012

Key data: 550 , 67 , 28

Type: 55 M Built: 2003 Control: Procan MD Closing type: Hydraulic Technical data Closing force: 550 kN Tie bar distance H x V: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance max.: 400 mm Plate spacing max.: 650 mm Screw diameter: 28 mm Lifting volume / spray weight (PS): 73.9 cc / 67 gram hp Spray pressure: 2778 bar General data Engine: 11 kW Heating: 9.6 kW Operating hours: on request Dimensions L x W x H: 3.3 m 1.8 m x 1.3 m Weight: 2430 kg Accessories Screen text: German Manual: Yes Additional equipment: Core train: x2 Robot interface

Boy 90A (No. 101) Built: 2006 TECHNICAL DATA Screw diameter [mm]: 42 Spray weight [g]: 193 Spray pressure [bar]: 1724 Closing force [kN]: 900 Tie bar distance [mm]: 430x360 Clamping plate size [mm]: 635 x 610 Tool installation height min. [mm]: 250 Control Control: Procan CT Monitor: Yes Control cabinet: Yes Other Power [kW]: 26.3 Engine hours [h]: 16969 Dimensions [m]: 4.9 x 1.2 x 2.1 Bjqmbwo2fl Weight [kg]: 3100

Boy 90A injection machine bought from Wadim Plast. In good + condition, it stood idle for about 5 years, but worked very sporadically and on simple, non-invasive polymers. She worked on PS, PP and biopolymer. No fibers. Freshly changed oil and all filters. Also replaced seals (from GG Trading) on all columns in December 2023. Cleaned regularly and well maintained. Hydraulically needle, holds and achieves set pressures. Seals were replaced on a regular basis if there were leaks. New Italian auger tip (spearhead+ ring). The injector is currently connected and working. Auger diameter [mm]: 42 Injection weight [g]: 193 Injection pressure [bar]: 1724 Closing force [kN]: 900 Column spacing [mm]: 430x360 Plate size [mm]: 635 x 610 Minimum mold height [mm]: 250 Control: Procan CT, Windows Monitor: Yes, touchscreen Installed power [kW]: 26,3 Operating hours [h]: 17787 Weight  ...

Description: Lot of milling tools Composed of 11 different tools for the manufacture of windows profiles Different designs and profiles Approx. Onsite Dimension. (l x w x h): 1,200 x 300 x 400 mm, weight approx.: 150 kg

Description: Set of window milling cutters Include different groups and instruction manuals ,  ,  , Approx. Onsite Dimension. (l x w x h): 1,125 x 800 x 120 mm, weight approx.: 30 kg

Description: Lot of indexable inserts , 13 units , never used Approx. Onsite Dimension. (l x w x h): 50 x 50 x 20 mm, weight approx.: .100 kg

Description: Guides for spindle moulders  ,BOY/ELBE , CE Standard , Approx. Onsite Dimension. (l x w x h): 1,500 x 500 x 500 mm, weight approx.: 10 kg

Description: Lot of 20 indexable inserts , 4 packs with 5 units , Never used , Approx. Onsite Dimension. (l x w x h): 120 x 80 x 50 mm, weight approx.: .100 kg

Clamping force [kN] 900 Dimensions of mounting plates (hxv) [mm] 635x610 Clearance between columns (hxv) [mm] 430x360 Min./max. mold height [mm] min 250 Maximum opening width [mm] 725 Injection unit Screw diameter [mm] 36 Injection volume [cm3] 157.8 Injection weight [g] 142 Injection pressure [bar] 2347 Electrical and hydraulic equipment Rated power of the pump motor [kW] 15 Heater power [kW] 11.3

This Boy 55 M Injection moulding machine was manufactured in the year 2010 in Germany and has 5532 production hours. It is equipped with a Procan MD control unit. 4 units are available.