seal o matic used for sale

TRIBLOK ALSIM (Sidel) from the production of mineral water from Western Europe, still in production, dismantling by a professional company Mark ALSIM Sidel Type Washer/Filler/Sealer Year of production 1997 Dimensions Length L 7564 mm Width W 8700 mm Height H 3446 mm Description Alsim Rinser Asmojet (1997) and 1x Alsim Filler RV.P (1997), capping machine; lots of spare parts Power supply 380V 50Hz three phase Voltage 24V Power 32.5kW Syrup feed - pressure 1 - 1.5 bar Water supply-pressure 1 - 1.5 bar CO2 power supply 10 - 12 bar Compressed air 6 bar Air consumption 500Nl/min Compressed air connection ½ gas CO2 power supply DN25 Water supply DN65 Product output DN100 Product power DN50

Card packaging system CR80/ISO7810) formats (e.g. telephone cards). The plant can wrap the cards individually in foil and also form a chain with 50 cards. In the end, the cards are automatically packed as a block. A camera is used to record a code for quantities and product control. Details: High-speed packaging machine for CR80/ISO7810) formats • Output up to 700 products/minute • 4-sided ultrasonic weld seam • High-speed feeder with servo motors for reliable separation • Chains of 5, 10, 15, 20, 25 to 50 as well as single cards. • 2 feeder feeders for card and insert • 2 camera systems from Quali Vision, for checking the sequence and in the outer packaging for labeling • Windows 2000Professional as a production system • Paternoster for destacking in the zig-zag process • Cross transport on outer packaging machine • Marden Edwards Series 4 LX12 ...

Electrical: 200-240 VAC, 30 amps, Single Phase, 50/60 Hz Machine dimensions: 52 wide x 38” deep x 79 to 103” high Film size: 12 and 19” widths available Production rate: 21 12” bags per minute, 50% filled with foam Protection: Superior product protection Foam Solutions: Various cost-effective foam solutions Molding: Numerous pre-formed mold options Operation: User-friendly operation Programmable combinations: Up to 156 pre-programmed cushion combinations Type: Freestanding floor model 5200x7900x10300 mm 100 kg unchecked loaded on truck

Model: Instapacker® Tabletop Foam-In-Bag System Electrical: 200-240 VAC, 30 Amp, Single Phase, NEMA L6-30R connection, UL and CE approved Machine dimensions: 19‘ x 19’ x 28 Production rate: Up to 16 foam-filled bags per minute Film size: Two perforation rolls available: IP16 (19‘ x 16’) and IP24 (19‘ x 24’) Foam solutions: Compatible with all Instapak® foams Setting options: 10 preset foam quantities via buttons Time delay of 3 or 6 seconds between bags Option to produce continuous bags 1900x1900x2800 mm 250 kg unchecked loaded on truck

Operating voltage: 220/240 V Frequency: 50/60 Hz Rated current: 2 A Foil width: approx. 400 mm Incl. roller conveyors Roller conveyor width: 400 mm Roller conveyor length: 2200 mm 3000 x 700 x 1500 mm 50 kg unchecked ex foundation, unpackaged

Manufacturer : Cotuplas Model: S4 Type : Manual sealer for plastic tubes Applications Production of samples for demonstration Market research Production of tubes for small or medium production runs Laboratory testing, internal product compatibility Features S4 unit accepts tubes from 13.5 mm to 60 mm in diameter and up to 230 mm in length Manual production speed of up to 240 tubes per hour Adjustable timer from 0 to 30 seconds to meet sealing requirements The tube is positioned between the sealing jaws by the operator Tube positioning device ensures process repeatability and seal quality (missing parts, planned installation) 3.5 mm high jaws maintain pressure while sealing Spring-loaded jaws open effortlessly with a lever Consumption water : 100 L / h electrical : 400 W

Inv. Num. : 7718 Type: GL MATIC 500 Producer: OMAS Generated: Parameters: The machine is in good condition.

Manufacturer : Axomatic srl Model: Optima 900 Matic Year : 1998 Type : Plastic tube filler Max capacity : 70 units / min Dosing range : 2 ml - 300 ml Max tube length : 280 mm with cap Tube diameter: 10 mm - 60 mm Power : 7 KW Current: 18 A

REF-1898 SECTOR MATIC AUTOMATIC MEAT SLICER Automatic meat fillet slicing machine. Manufacturer: C.R.M. Costruzioni Revisioni Meccaniche S.r.l. Model: Sector Matic 300. Power: 5.5kW. 400 V. Machine number: 220. Year: 06/1999. Dimensions: 2,500mm length, 450mm belt width, overall width 1,100mm, height 1,500mm.

A 3M-Matic automatic carton sealing machine is available. Min. carton dimensions X/Y/Z: 150mm/150mm/120mm, max. carton dimensions X/Y/Z: -/550mm/620mm, tape width range: 36mm-48mm, packaging capacity: 19 cartons/min. Documentation available. On-site inspection is possible.

Description: plasma cutting system possible welding processes: plasma cutting with standard gases plasma cutting with oxygen (fine cutting technique) -autogen-burning cutting cutting speed: per sheet metal base up to 8m/min cutting length (x-axis):4300mm cutting width (y-axis):2100mm cutting thickness for plasma cutting: -for stainless steel=max.130mm;for normal steel (liquid steel)=max.40mm -for light metals/ Alloys=max.150mm burner adjustment distance: 250mm Plasma power source: 1. Nertajet 320-640 (2x parallel) Insulation class H; Protection class IP 23; 30Hz 2. Nertajet 120H-Autonom Road dimensions: 6400x400x550mm cutting table Ground: 4500x2600x670mm Equipment: Smoke extraction via suction table Smoke disposal by filter system Cooling of Et Scheid IK-V 18 Plasma cutting torch Autogen cutting torch roadway (rail) length 6400mm cutting table length 4500mm To ...

Single acting pneumatic actuator, type it 350 Spring Kit Nr. 4 Function: Federkraftschließend Manufacturer: El-o-matic (today: Emerson) Type: ES0350H1A04A00N0 Serial No.: 4220206001055 Pressure: maximum 8 bar (116 PSI) Max./min. temperature: 80 ° C / - 20 ° C Drives are as good as new, as they are still unused! New price: 563,84

; ready for immediate use

Format range: 1450 mm, min. 290 mm Equipment: Longitudinal seam, folding bottom, double edge, 4 point bonding, electronic Upper glue unit HHS 16 channel with 2x 4 and 2x 2 application heads, High-pressure pump, vibrator & dental gauge on the feeder, Pre-crusher left, kicker, counter, 2x pneumatically ascendable Accessory holders, additional folding floor module with press, additional means transport in folding, pressing rollers after folding, fully automatic format adjustment, 2x alignment to the press belt, UV marking device, video surveillance on the press belt, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transport belts. Other: Machine can be visited by arrangement while running.

For the loading or unloading of drums from trucks and containers, for the discharge palletizing or converting barrels in a shop or a factory site. Technical specification -SWL: 750 kg - introduction of the fork:-weight: 80 kg

Process controller, controller, temperature controller, temperature sensor, setting for temperature -Type: 994-603 -Weight: 3 kg

Machine practically not used like new In 2021 used 4 times Drum with font height 4mm letters small AND capital , all Polish characters

Description Sprue unloading manipulator Y axis: 360 mm mechanically adjustable - 500 mm pnumatically Z axis: 350 mm mechanically adjustable - 100 mm pneumatically pneumatic axles clamp control: yes indicative size of the press (ton): 65 tons max capacity: 0.1 kg Euromap 12

USED STAINLESS STEEL VERSA-MATIC E2 DIAPHRAGM PUMP

USED STAINLESS STEEL VERSA-MATIC E4CA1R110-B DIAPHRAGM PUMP

USED STAINLESS STEEL VERSA-MATIC E4CA1R110-B DIAPHRAGM PUMP

Stainless steel VERSA-MATIC ATEX diaphragm pump

Air Operated Double Diaphragm Pump manufactured by VERSA-MATIC

Stainless steel VERSA-MATIC ATEX diaphragm pump

Air Operated Double Diaphragm Pump manufactured by VERSA-MATIC

Stainless steel VERSA-MATIC ATEX diaphragm pump

USED VERSA-MATIC V2 DIAPHRAGM PUMP

Air Operated Double Diaphragm Pump manufactured by VERA-MATIC

Technical data Number of spindles: 3 Execution: Horizontal Voltage 50 Hz 3x: 380 Volt Various accessories:

I sell the complete window construction profiling line: 1 pcs. 5-spindle four-side planer with saw Weinig Unimat 23EL - without grinding machines HESS - other replacement machine by appointment 2 tap cutting and slotting system Weinig Unitec 10. 2 pcs. profile automatic converter center Weinig Univar 10. - Set of complete Weinig automation feeders and foerderer. - without a central computer - must be added and programmed. Year of construction 1997. Milling heads OERTLI. Available the same. Immediately dismantled with original pallets. Price together only 48,000 euros. Condition very good !

Steel bar shear Fabr. MUBEA-Matic type KFMAV 1300Machine -No: 42982L-profile: 30 x 3 to 180 x 18 mmU-profile: 40 x 4 to 220 mmI-profile: 80 - 220 mmI-PE: 80 - 220 mmFlat iron: 5 x 230 to 180 x 30 mmRound profile: 80 mmSquare profile: 70 mmConnected load: 11 kWExternal dimensions: 2200 x 1000 x 2500 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

As good as new machine with very few operating hours (built in 2020). This like-new, very powerful, fully automatic shrink wrapping machine works with a permanently heated longitudinal and a cycled transverse welding, which offers at least 3 undeniable advantages: • No length limit of the product to be packaged • Significant increase in production capacity • Cost savings due to less film waste • Machine dimensions: 2180 x 1545 x 1525-1655 mm • Dimensions welded frame: 500 mm/length unlimited • Max. product height: 200 mm • Max. film roll width: 600 mm • Max. ø film roll: 350 mm • Production capacity: 600-4200 per hour (depending on product size and material) • Belt speed: 10-30 m/min • Power rating: 380-415V /3ph/ 50/60Hz • Consumption: 2300W • Continuous longitudinal seam with permanently heated transverse welding • Welding beam for longit ...

G 76 | CASE ERECTOR 3M-MATIC YEAR: 2003 SPEED: 14 PPM MODEL: 400CF/R TYPE: WITH ADHESIVE TAPE FOR AMERTICAN BOXES FORMATS: MINIMUM H 12 CM X LARG. 15 CM X LONG. 20 CM MAX H 50 CM X LARG.35 CM X LONG. 45 CM SAFETY PROTECTIONS

Compact and mobile edge banding machine Bi-Matic 4.5 Starter Plus for gluing and processing edge material Including extensive supplies of glue and edge material., Aggregate: 4, Aggregate 1: Caps, Aggregate 2: Round, Aggregate 3: Pulling blade, Aggregate 4: Babble

Key data: 8000 mm, 3 mm

Machine is in stable welded construction with 9 stands 9 clamping cylinders and 36 coupling joints K38 mounted on a base frame The machine has the following equipment: CNC 8000 Control with Touch Screen TFT Color Display 17 Inch Attachment rail Brush table Upper beam with water seam groove Oil filling Fastening and levelling material Emergency stop rail over the entire length of the machine Integrated emergency stop operation in the foot pedal for upper and bending beam 2. Foot pedal for 2-man operation Upper cheek protection 2 short-part clamping fingers Back gauge: 150-1150 mm Colour: light blue Power requirement: 400 mm Insertion depth: 1150 mm Positioning speed: 250 mm/sec. without roller scissors Bending angle: 145° Machine Number: K10192 Power: 8000x3.0 mm, 4.0 mm aluminum, 2.0 mm front Dimensions: 11.x3.4(2.1m for transport)x2.0m Weight: 26,000 k ...

Used EL-Matic 24H It has been used for approximately 2,500 operating hours (3 hours a day, 15 hours a week and 60 hours a month for a total of 41 months). The machine comes with a powered input conveyor belt and a manual output conveyor belt. High-speed automatic L-sealer with a maximum packing height of 200mm The Audion EL-Matic 24H is and industrial L sealer suitable when you would like to pack products with a height of maximum 200 mm. This is 50 mm more than the standard EL-Matic 24. This automatic L-sealer uses an automatic conveyor infeed that can process up to 3600 packages/hour. Soft feed conveyors carry products into the system and place them inside the folded shrink film. An adjustable sealing arm raises and lowers as products move through the system. Once sealed, the closed pouch could then be moved into an optional shrink tunnel, shrinking and tightening the film. The Au ...

2012 BEAM MATIC LM4 Starmatic 1003 AC / DC Submerged arc welding system for sale, second hand. Already dismantled and stored Find more here - / Contact us at -

AUDION packaging machine CS-Matic 100 with conveyor belt for sale. Adhesive tape sealing machine series: Masterline equipped with 2 gluing units model K11 for SKB Up to 50 mm width front side overgluing approx. 65 mm. Including: 1 roller attachment table, mod. AG 5 375 x 500 mm 2 Roller table, model AG 1 4 Double uprights 500 mm wide, height 520-830 mm RAL 9002 icl. end stop, firmly screwed down. Great condition, little use. Find more here - / Contact us at -

VEGA PEGASSO 145, Production year:2004, Kind of boxes: straight line / crash lock bottom / 4 corners / 6 corners / double wall boxes, Materials: cardboard gr 200 – 800 / corrugated board (waves: E-F-N-B), in production actually, Available in end of September 2024

BOBST SPO 160-A MATIC Production Line - Die Cutter from 1994 1994 BOBST SPO 160-A MATIC Production line Manufacturer: Bobst S.A. Switzerland Type: SPO -A Matic Year of production: 1994 Max. Sheet size: 1600 x 1100mm Min Sheet size: 600x520 mm Max. Speed: 6500 Sheets/h Corrugated Thickness: 9 mm Cutting force: 400t Description: Bobst P 100 A Prefeeder BOBST SPO 160 A Matic Production Line BOBST Easyloader Pre-feeder; BOBST SPO 160 A Die Cutter Separator / Breaker Turning Unit Stacker/Palettizer

The welding station built by Air Liquide Welding in 2015 provides a complete solution for automating the plasma and TIG welding process. The longitudinal welding station is equipped with an EXINTER 32 welding bench and a NERTAMATIC 450 DC TIG-PLAZMA welding installation. The installation is designed for the longitudinal welding of tank components (cargs), pre-prepared with or without bonding welds (in the range of sheet thicknesses 1-5mm). The SEAM-MATIC EX IT 32 D2C longitudinal welding machine consists of the following components: – PLC control: SIEMENS – NERTAMATIC 450 DC TIG-PLAZMA power source with control panel – connection device between power source and torch – SP7 torch (plasma) – MEC4 torch (TIG) – AVC system (Arc Voltage Control) for changing the arc length between torch and workpiece – cooling system: FRIOJET 3000 – double jaws – gas control syst ...

Rotary transfer machine with work stations for filling composite cans (with or without aluminum inner liner), Lid: punched cardboard base, with sealing medium on the inside,, Sealing: Heat sealing with pressing, with conveyor belt for can inlet and outlet, with station for attaching a filling machine (here Multipond multihead weigher), with vacuum carton bottom stacker and placer,, with hot sealing station 1 for centering and sealing the cardboard bottom,, with heat sealing station 2 for sealing the cardboard base onto the composite can., Until recently, tablets were filled into cans here, followed by a sealing station., power: approx. 40-50 doses / min

Built by Air Liquide Welding in 2015, the welding station provides a complete solution to automate the process of TIG + Plasma welding of longitudinal and circumferential welds. The welding station is equipped with a CB MATIC LM 52×43 welding column boom and two NERTAMATIC 450 DC TIG – PLAZMA installations and a head for vertical welding. The installation is designed for welding rotating parts, tanks, longitudinal or circumferential welds, pre-prepared with tack welds. The AIR LIQUIDE robotic welding station consists of the following components: – welding column and boom: CB-MATIC LM 52X43 – NERTAMATIC 450 DC TIG-PLASMA power source with control panel – SP7 torch (plasma) – MEC4 torch (TIG) – connection device between power source and torch – specially designed torch support head with accessories – PLC controller: SIEMENS – rotary table 30t with arms – RO ...

General SKU422U1333 LocationBarneveld MakeIndosa TypeMatic 125 Mach.No.12924 Main Features MaterialStainless steel Motor1 KW Inlet diameter80 mm Number of12 heads Specified Features - Capper Cappercheck Rotating cappercheck Suitable forcans Number of closing heads:1 With motor0, 55 kW (400 V) Pneumatic operatedcheck Cappers Motor220/380 volt, 1 kW MaterialStainless steel Information Year of construction1984 Mounted in framecheck With switchgearcheck Total height1,80 mtr Floor space1,20 x 1,20 mtr Weight400 kg Extra Specifications12-fold rotation. 1-head can capper. with cabinet with format parts CappersIndosaPackaging machines > CappersBrand > Indosa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

Serial number: 16618 Measuring range: 250 x 50 mm Measuring system resolution Z: 0.05 µ Guiding accuracy: 250 mm Measurable contour radii: up to 0.1 mm Length: up to 0.001 mm at an angle Incl. granite measuring plate from the manufacturer MAHR Dimensions: 650 x 450 mm 800 x 500 x 800 mm 400 kg unchecked loaded on truck

vibratory feeder diameter range 12 mm shaft length under head 120 mm output - pieces/min 300

Manufacturer : TGM Model: E250 MATIC Year : 2011 Type : Plastic tube filling and closing machine Closure : hot air device (HA) Max capacity : 60 units / min Transport chain : 10 buckets Empty tubes feeding : automatic Tube centring Sold with 3 simple hoppers and 1 jacketed hopper Verification check: no tube - no filling Outfeed conveyor belt Formats available.   General information Tube height: 50 - 240 mm Diameter: ? 10 mm - 50 mm

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 24 - Control: FANUC - Working area (X x Y x Z): 1.300 x 600 x 600 mm - Max. workpiece weight: 1.000 kg - Max. spindle speed: 9.000 rpm - Axes: 3 - Dimensions (long x wide x high): 3.550 x 2.568 x 2.171 mm

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration