marine diesel engine used for sale

PRE-ALPINE REGENERATION LINE COMPLETELY REVISED, ELECTRICAL WIRING, VENTILATORS, PULPIT. EQUAL TO THE NEW! MATERIAL: PE PP PC PS ABS HOPPER WITH DOSING UNIT EXTRUDER WITH DIAM SCREW. 105 MM. 35 L/D AVERAGE PRODUCTION 300/450 KG/H BASED ON MATERIALS ENGINE: 117 KW OIL PUMP VACUUM DEGASSING PUMP centrifuge Cabinet

Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

Gas-fired preheating furnace, make VEI type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Material test bench / final inspection consisting of the following main components Keyence XG-H500M Digital 5 Million Pixel P/W Camera CCD: 2/3-inch monochrome CCD, squareElement all pixels 11 times read speed, 5,050,000 pixels Scan Method: Progressive (61.2 ms), Interlace (40.3 ms)Interlace is a binning process that sums up the odd rows and even lines. Model CA-DC21E Lighting Controller Type lighting controller For XG/CV-5000/CV-X200/CV-X100 series only Input: Forced shutdown of the lighting: Input voltage max. 26.4 V, min. 2 mA Edition Light control method (1) Constant voltage regulation method (DC lighting) (2) Pulse width modulation method (emission frequency: 100 kHz) [Change of ECU setting] Brightness levels 255 levels digital [Change of ECU setting] Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC ...

Aseptic filtration system Mona. YOM 2008 Technical data: Capacity for concentrate: approx. 5.8 m3 / h (8000 kg / h). Plate filter area: approx. 55 m2. Control system: Simatic S7. The cooling capacity of device: 154 kW. Electric power connected: approx. 100 kW. Steam consumption: approx. 200 kg/h. Steam pressure: 2 Bar. The MONA system is used to improve the quality of the concentrate before loading. The quality is improved by pasteurization of the finished product with the possibility of its pre-treatment on a plate filter. The use of appropriate filter plates allows to reduce the turbidity of the juice and obtain better microbiological parameters by eliminating bacterial spores resistant to the temperatures used in pasteurization. Technical description of the device The device consists of the following elements: five-section plate exchanger, on which the temperature is  ...

MAN head, for engine 28/32 REVISED

Membrane ultrafiltration XL 300 by B&P Engineering with a maximum efficiency of filtered apple juice of 30 -35 m3/h. Year of production 2007 / Expansion 2018. Very good condition. Technical parameters: 1. Membrane modules Type A19 FPA 20 12", quantity: 120 pcs. (installed on June 2022) 2. The filtration area is 300 m2 3. Capacity: 30 -35 m3/h of apple juice 12 Bx 4. Filtration/washing temperature 50 -55 degrees Celsius. c 5. Maximum working pressure 6 bar Ultrafiltration devices: 1. A block of 120 filter modules mounted on the frame of the device 2. Pump block: INOXPA DIN -FOOD, INOXPA SE26, PACO 3. CIP station: Grundfos dosing system + two capacity tanks. 100 l for  NaCLO, NaOH 4. Clear juice/CIP tank vol. 2.5 m3 5. Tubular heater 6. Control cabinet with a touch panel.

for format 132 cm

Mix tank Volume : 3000 L Mixing : High Shear Motor : 14 HP Mnufacture date : 2012 Condition : Never Used Heated : Hot water 90c Cooled : Cold water

Cooling tower / water cooler Manufacturer Carter Environmental Engineers Type Sandrigham Serial number AQ 36068 Built June / 2006 2 x fan dia. 1500 mm Engine 380 V / 11 kW / 705 rpm 2 x centrifugal pumps Apex Type ISFC 125x100 Power 173 m3/h / H 35.36 m Engines Manufacturer WEG Type W22 Premium Power 37 kW / 2960 rpm Dimensions: LWH approx. 6,500 x 2,900 x 4,000 mm

Electrically heated box furnace, make VEI-Engineering type: LU temperature: max. 650°C heating power: 45 kW fan: 3,0 kW total connected load: approx. 52 kVA internal dimensions (l x w x h): 1.000 x 700 x 700 mm charge weight: max. 1,0 t

Ultrafiltration Membrane filter device for the clarification of all kinds of fruit juices. manufacturer: Mabex Engineering GmbH type: UF412 dynamic cross-flow filtering. Mabex tubular membranes in bundles A-19. filtering capacity 12,000 l / h electric power 26 kW water supply capacity 80m3 / h compressed air 6 bar The device is complete and functional. Technical Documentation Software We send photos at the customer's request.

Plastak HR8 8 stations, for injected leather In working order and with the possibility of seeing it in operation

Mechanical speed 1200 m/min Maximum pre-stretch 400% (1m = 5m) Thickness of the film 530 mm Film width 300550 mm Finished roll diameter, at most 250 mm Jumbo (mother) roll diameter, at most 500 mm

V2 Engineering  Cadence 15 cases per min Cash box format: Opening width from 150 to 550 mm Insertion length from 110 to 350 mm Height from 100 to 350 mm Product format: Width from 25 to 540 mm Insertion length from 70 to 220 mm Height from 10 to 150 mm

KEMWALL ENGINEERING POWDER PRESS Year: 2002 CE Marked: YES Model: KC 21/12 Voltage: 415V Frequency: 50 Hz Serial No: P6-5/4864

Piston Bergen B Gudgeon pin Ø145 mm RR No. 702513

42mm W/E HF Tube Mill Make: Won Engineering (Korea) Year New: 2008 Diameter: 10mm – 42.7mm Square Sizes: 12mm x 12mm – 18mm x 18mm Pipe Length: 5m – 8m Line Speed: 120 meters per minute Dual Mandrel Uncoiler Cage Type Accumulator Forming Mill with 100Kw DC Drive 150Kw High Frequency Welder Cooling Section Sizing Mill with 100Kw DC Drive Flying Cut-Off Saw with 7.5Kw Motor Run Out Table Dumping Table Electrics, Hydraulics, Controls, Lots of Tooling

Hot runner control unit - Feller Engineering MCS (2 pcs.) Year of construction: Description: 24 hot zones with cabling Price: On request

Available in stock 3 x NEVER USED Capstone Pressure Transducers. 1 x Omega Engineering model PX309-100GV + 2 x Omega Engineering model PX319-100GV Most commonly used for Microturbines C30. The equipment was NEVER USED and is sold inside the original packaging. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

There are two identical vibrating screens available.

Caterpillar C15 - Unused - 475 HP - MCW

Caterpillar C15 - Unused - 540 HP - MCW

Manufacturer: SM Engineering Type: KMB Year of construction: 1998 Working width: 495 mm Max. roll diameter: 500 mm Dimensions: 1600 x 2000 x 1800 mm

Manufacturer: SM Engineering AG Type: KBM Year of construction: 1998 Working width 495 mm Overall size: 1600 x 2000 x 1800 mm Electrical data: 3x400 V; 50 Hertz Operating pressure: 6 bar The machine is suitable for cutting off various films and other materials.

Description volumetric dispenser ENGINE PLAST DPM 15/30 production: 1-15 KG / H hopper capacity: 25 LT auger diameter 30 mm pitch 25 mm power supply 220 V power: 0,18 Kw

Description volumetric dispenser ENGINE PLAST DPM 15/30 production: 1-15 KG / H hopper capacity: 25 LT auger diameter 29 mm pitch 22 mm power supply 220 V power: 0,18 Kw

5369 – HYDRAULIC SHEET METAL PUNCHING DEVICE With space for 9 hydraulic tools Manufacturer: ENDI Engineering Kft Type: LBS-20 Year of construction: 2004 Operating pressure: 200 bar Voltage: 380V Electrical power: 1.5 kW Weight: 378 kg

Description volumetric dispenser ENGINE PLAST DPM 15/30 production: 1-15 KG / H hopper capacity: 25 LT auger diameter 30 mm pitch 25 mm power supply 220 V power: 0,18 Kw

DHE DEN HOLLANDER ENGINEERING: Used direct heating system for milk, cream, liquid egg, ice cream mix, etc. by DHE Equipment for the production of milk with a longer shelf life using the gentle process The product is heated to 65°C in counterflow, heated to 130°C by steam injection in less than 1 second and then cooled down again in a very short time by evacuation. Further cooling is carried out by the incoming product in counterflow and ice water. Extraordinarily gentle on the product process - closed supply tank - speed-controlled pumps - Homogenizing machine -Heater - Infusion container - Relaxation tank - Load steam condenser -Piping - Fittings and control cabinet - Measuring, regulating, controlling, recording and safety equipment - Connections for: steam, water, electricity, etc. - All system components mounted on a base frame in floor construction and mounted in containers Ca ...

Other Info: 1 MHG - SMG 25 Shotblasting MACH-ID 7660 Make: MHG Type: SMG 25 Shotblasting

Sell BGAA used amine scrubbing from the manufacturer DGE with a capacity of 500cbm raw gas. Built in 2009. Plant is out of order and conserved. System is complete incl. dryer. If you have any questions, please contact us by phone

MAK 8M32C Engine Block In Reusable condition

General SKU305U615 LocationBarneveld MakeSTC Engineering GmbH TypeReaktor 6500LTR No.6004 Year of construction2005 Pressure Working pressure0.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume6500 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6500 Ltr. Vessel sizesDia. 2000x2534 mm Dished bottomcheck Dished top sidecheck ManholeDia. 450 mm Top connectionsDN200, DN100, DN50(4x) OutletDN80 Half coil jacketed45,5Ltr Max. temperature-20/160°C With paddle stirrercheck EKATO, Type: HWL2080 Motor7,5kW, 380-420/655-725Volt, 1440rpm (EX) Speed mixing shaft46rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information Total height3,7 m Weight2100 kg CEcheck Floorspace2,3x2,3 m ATEX compatiblecheckStainless Steel ReactorsSTC E ...

General SKU384T1155 LocationBarneveld MakeQuinn Engineers TypeV4408/C No.01-474-0026316 Year of construction1980 Pressure Working pressure0 Bar Working pressure jacket3.04 Bar Main Features MaterialStainless steel Volume1460 Ltr. Motor1.55 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity±1400 Ltr. Vessel sizesDia. 1300x1100 mm Dished bottomcheck Flat top sidecheck With covercheck Top connections45 mm, 35 mm (2x) Outlet45 mm Max. temperature93 °C. With paddle stirrercheck Motor1,55 kW, 415 Volt, 1400 rpm MaterialStainless steel 1.4401 (316) Information Mounted on legscheck Weight900 kg Floorspace1,4x1,4 m Total height2.4 m Extra Specificationsjacket connection diameter: 24 mm (2x) jacket capacity: ±190 Ltr. Stirring vesselsQuinn EngineersStirring vessels > Stirring vesselsBrand > Quinn Engineers What you can expect from Foeth ...

General SKU223S097 LocationBarneveld MakeK.F. Alliance Eng. Limited (UK) TypeSH No.8868 Year of construction2002 Main Features MaterialStainless steel Length2300 mm Width400 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder width400mm Feeder length2300mm Feeder height130mm Closedcheck Inletdia. 240mm (3x) dia. 200mm (1x) Outletdia. 240mm With motor1.5 kW 230/400 Volt Information Mounted on framecheck Total height1,8 M Weight1200 Kg CEcheck Floorspace3,1x0,8 MVibro feedersKF Alliance Engineering Ltd.Conveying systems > Vibro feedersBrand > KF Alliance Engineering Ltd. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Ba ...

Inv. Num. : 6597 Type: AS275 Producer: AOSIF ENGINEERING LTD Created: 2022 Parameters: Throughput speed: 1500 1/min Frequency: 50 Hz Voltage: 380 V Machine dimensions: 1578x778x1290 mm Weight: 2800 kg

Insulated tank-mixer with a capacity of 25,000 liters. Mixer for thick mass

Lid placing machine, make Laue Engineering, year 2018, used for tin cans with a diameter of 127 mm (dried milk), Slip lid with integrated spoon (10 ml), Consisting of:, can conveyor, for the supply of the cans, feed generation in front of the separation station and transfer of the finished article (can with lid)., execution: Welded frame made of stainless steel with Intralox conveyor belt, drive motor, feed star and goods security, cover conveyor: Feeding of the lids to the lid placer, execution: Welded stainless steel frame with Intralox conveyor belt, drive motor and article surveillance, lid setter: Separation, positioning and joining of cans and lids, return of finished part to can conveyor, execution: Welded frame made of stainless steel with carousel (8 stations), drive motor and goods security and complete cladding; switch cabinet, Destacker: Lid magazine and lid feeding on lid co ...

Key data: 20 KW, 400 V

Development prototype of MA-C-S engineering, Augsburg. Total operating hours ~11,500 h. Originally: 20 kW Ford gas engine from Sauer & Sohn and Geno from E.W. Hof. At ~ 8,000 h: Conversion to 20 kW Toyota gas engine and new water-cooled asynchronous generator from Weier, both from IMT (Industrie-Motoren Technologie GmbH, Inh. G. Thier, Landsberg am Lech). Conversion execution and IBN by IMT. Control: Deif AGC4-GER-Y3-A1 Control cabinet designed and built by Maier Steuerungstechnik, Ruhstorf Heat exchanger from Triptiser stainless steel Not ready for operation (short circuit in relay in the control cabinet) CHP has no certifications.

325,000 Litre Stainless Steel Storage Tanks with Insulation Excellent condition SBS will carry out complete turnkey project from dismantle to chartering of ship. Please note these tanks must be transported by ship and therefor your site must be near to the port.

General SKU221W209 LocationBarneveld MakePascall Engineering Type1228-SS-C No.24615 Year of construction1999 Main Features Motor0.75 KW Width160 mm Specified Features - Three roll mill Three roll millcheck Roll diameter90 mm Roll width127 mm Rolls placed horizontalcheck Motor0,75 kW, 230/400 Volt, 1410 rpm With variable speed drive250 rpm Manual roll adjustmentcheck Materialstainless steel1.4057 AISI 431 Information With switchcheck Weight190 kg CEcheck Floorspace0,55 x 0,60 m Total height1,05 mThree roll millsPascall EngineeringMills > Three roll millsBrand > Pascall Engineering What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU221W211 LocationBarneveld MakePascall Engeneering Type2 No.20633 Year of constructionunknown Main Features Motor0.75 KW Width160 mm Specified Features - Three roll mill Three roll millcheck Roll diameter90 mm Roll width127 mm Rolls placed horizontalcheck Motor0,75 kW, 230/400 Volt, 1400 rpm/ 250 rpm Manual roll adjustmentcheck Materialstainless steel1.4057 AISI 431 Information With switchcheck Weight190 kg Floorspace0,55 x 0,60 m Total height1,05 mThree roll millsPascall EngineeringMills > Three roll millsBrand > Pascall Engineering What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Make: Tadano Engineering Model: TB-600 Mfg. year: 2009 Capacity: 60 Tons Frequency: 60 Hz Voltage: AC200 / 220 V Excellent condition. Stocked in Japan. Attached PDF file with drawings and dimensions. Contact us at infoheeyas.co.uk

2022 PTA - Pharmaceutical plant engineering Designation: Shipping weighing (laminar flow) for G3a Manufacturer: PTA - Pharmaceutical plant engineering Construction year: 2022 Remarks: Shipping weighing cabin has been set up but has not been put into operation. Find more here - / Contact us at -

Quantity Description 2 K11R200L2EExeIIT2 2 K11R200LX2EExeIIT3 1 KE3200L-AA024-Z 1 KE7200L-AA024-Z 1 KPER200LX2EExeIIT3 2007 VEM K11R 200L 2 Machine designation: ATEX electric motor Manufacturer: VEM Model: K11R 200L 2 Year of manufacture: 2007 Condition: used (fully functional) Information about the motor Power: 25 kW Speed: 2910 min-1 Design: B5 Operating mode: S1 Thermal class: F Protection class: IP 55 Frequency: 50 Hz Weight: 210 kg 2002 VEM K11R 200LX2 Machine designation: ATEX electric motor Manufacturer: VEM Model: K11R 200LX2 Year of manufacture: 2002 Condition: used (fully functional) Information about the motor Power: 24 kW Speed: 2950 min-1 Design: B35 Operating mode: S1 Thermal class: F Protection class: IP 55 Frequency: 50 Hz 1991 VEM KPER 200 LX2 Machine designation: ATEX electric motor Manufacturer: VEM Model: KPER 200 LX2 Year of man ...

AKW Engineering Ltd Compact Spiral Freezers Currently building 4 bespoke compact freezers, using reconditioned top quality stainless steel framework. All belts are 510mm wide. Units are constructed on a hot dipped galvanised sub-frame, for easy transportation and relocation. All with new insulated enclosures and doors. Wiring and all serviceable components are new. All with built in belt wash spray bars. Choices of freezing capacities, evaporators and refrigerants.

Glass Bottle Filler-Capper 400 bph for Beer, Fully Automatic - 2016 This very good condition filler-capper was built by Norwegian HH Engineering in year 2016 and it has been filling beer in 330ml and 500ml glass bottles. The line is very compact in size and it has wheels for easy moving. It has four vertically moving filling nozzles which are built as counter-pressure fillers and which then allow the customer to fill both carbonated and non-carbonated beer with the same machine. Filling nozzles have inbuilt air pre-evacuation system with CO2. Machine is also compatible with several bottle sizes as well as standard longneck 0.5l and 0.33 bottles. It has a single head crowner for 29 mm caps. Operation is controlled with a Allen-Bradley PLC. Manufacturer HH Engineering AS Manufacturing year 2016 Current status Dismantled Capacity 400 bph Bottle sizes 330ml and 500ml longneck  ...

Cutting power / Schnittkraft: 55 ton. Hole punch / Lochstanze: 200 x 15 mm steel sheet metal / Flachstahl. Flat steel shears / Flachstahlschere: 230 x 20 mm │ 375 x 10 mm. Angular cutting / Winkelschneiden: 90° 125 x 13 mm │ 45° 70 x 10 mm. Overall dimensions / Abmessungen: 1.600 x 710 x 1.700 mm.