We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Pressing force: 10t, oil filling: 300l, max. pressure: 20bar, press type: C-column press, machine dimensions X/Y/Z: approx. 1250mm/1200mm/3000mm. On-site inspection is possible.
used
Press capacity: 40 ton Daylight: 550 mm Stroke: 150 mm Ram speed down: 50 mm / sec Ram speed up: 85 mm / sec Throat depth: 250 mm Table surface area: 1.400 - 4.900 x 280 mm mm Table height over floor: 900 mm Oil volume: 250 l Driving motor: 5,5 kW Dimensions L x W x H: 1.400 x 1.800 x 2.400 mm Weight of machine approx.: 2.300 kg
used
Stander - hydraulic press MAE type S63SZ SO Masch.Nr. 551277 year of construction approx. 1977 compressive force 63 ton. Projection 320 mm Table surface 850 x 630 mm Plunger area 1050 x 500 mm Plunger stroke 500 mm Installation height max. approx. 730 mm Table height above floor 970 mm Tank capacity Hydraulics 600 liters Drive power 15 kW Mains connection 380 Volts, 50 Hz - Hydraulic drawing cushion under the table with holes through the table top - 2-hand control - Electric control cabinet damaged Space requirement L x W x H 2000 x 1200 x 3420 mm Weight approx. 5 ton. The machine is working, but the control cabinet is mechanically damaged. During the test run, the machine reaches a pressing force of 50 tons, presumably a pressure relief valve flows out. used
used
Hydraulic press, manufacturer: MAE, type: DSF250ZU, serial no.: 556178, max. pressing force: 2,500 kN, oil filling: 800 ltr., clamping surface: approx. 120x110 cm, 4 storage tables, length: approx. 250/160/2x 110 cm, with various accessories such as clamping material, air bolts, etc., with various accessories such as clamping material, air bolts, etc., with regard to dismantling planning, follow the attached foundation plan
used
pressure: 40 t throat: 320 mm stroke: 250 mm arm length: 320 mm table surface area: 1400x600 mm ram surface: 1200x600 mm dayligth: 650 mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3200x3300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 350 KN distance between columns: 2500 mm total power requirement: 14,5 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3270x3240x2020 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: . : 52965 pressure: 10 t oil contents: 110 Liter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Hydraulic single column press make MAE type S-RH 160Max. Pressure: 160 tProjection: 360 mmStroke: 500 mmPressure piston diameter: 280 mmDrive power: 22 kWWeight approx: 10 tDimensions approx: 1800 x 1400 x 3000 mmWith- with horn dimensions: 720 long, 570 x 570 mm side lengthxa0xa0 with 1 T-groove on topused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic straightening press make MAE type S 16 RHTechnical specifications:Press force: 16 tRetraction force: 57.7 kNWorking pressure: 204 barRam speed, down: 25 mm/sRam speed, up: 68 mm/sStroke: 200mmInstallation height: 550 mmProjection: 190 mmTable depth: 320 mmTable width: 480 mmTable height: 750 mmTank volume: 120 lPump flow rate: 11.6 l (min.Tappet bore: 32mmDrive power: 5.5 kWExternal dimensions L x W x H: 1400 x 700 x 2070 mmweight approx.used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
pressure: 10 t distance between columns: 500 mm stroke: 200 mm total power requirement: 10 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 100 t throat: 380 mm stroke: 300 mm arm length: 380 mm table surface area: 1700x700 mm ram surface: 1400x700 mm dayligth: 650 mm total power requirement: 30 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2400x3600x3400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.