item-No.: 163759547 is deleted from the database!

10 similar machines:

approved
dealer
Machine: HERMLE UWF 801
used
Seller: Land-de A+B Werkzeug Maschinen Handels GmbH
Location:: Ahaus

x-travel: 510 mm y-travel: 450 mm z-travel: 410 mm taper in main spindle: MAS BT 45° (SK40) table surface area: 800 x 395 mm T-slots: 6 turning speeds: 50 - 2500 U/min feed stepless: 4-1600/4-1000 mm/min voltage: 400 V total power requirement: 5,0 kW weight of the machine ca.: 1400 kg range L-W-H: 2300 x 2300 x 1800 mm from a training workshop maintained condition () Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Centr ...

approved
dealer
Machine: HERMLE UWF 801
New in: 1985
used
Seller: WMT GmbH & Co. KG
Location:: 46342 Velen

x-travel: 510 mm y-travel: 450 mm z-travel: 410 mm table-size: 800 x 390 mm spindle taper ISO: 40 turning speed range - vertical: 50 - 2500 U/min quill stroke: 80 mm spindle drive: 3 KW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 1,6 x 1,6 x 1,95 m NC tool milling machine - Heidenhain TNC 114B - hydr. Tool clamping - Machine light - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

approved
dealer
Machine: HERMLE UWF 801
New in: 1988
used
Seller: EnTeHa GmbH & Co.KG
Location:: D-64625 Bensheim

x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm total power requirement: 4 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2 x 2 x 2 m No. 3999 Universal tool milling machine HERMLE UWF 801 Working area: 500 x 430 x 400 Drive: 3 Control: Heidenhain TNC 135 Fixed table 800 x 390 mm chip tray documentation Spindle SK 40 Speed range 50 - 2500 min-1 Space requirement approx. 3 x 3 x 2 m Weight approx. 1400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

approved
dealer
Machine: HERMLE UWF 801
New in: 1983
used
Seller: EnTeHa GmbH & Co.KG
Location:: D-64625 Bensheim

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 3 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2 x 2 x 2 m No. 2392 Universal tool milling machine HERMLE UWF 801 Working area: 500 x 430 x 400 mm Drive: 3 kW Control: TNC 135 With manual control: Working area 520 x 450 x 410 mm, fixed table 800 x 400 mm Tool holder SK 40 18 spindle speeds from 40 - 2000 1/min Feed stepless x,y 4 - 1600 mm/min z 4 - 1000 mm/min Dimensions 2.3 x 2.3 x 1.7 m Weight 1350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

approved
dealer
Machine: HERMLE ( 5X ) UWF 700 /3x 801 / 802
New in: 1988
used
Seller: EnTeHa GmbH & Co.KG
Location:: D-64625 Bensheim

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 222 m 1 x UWF 700 Digi 3 x UWF 801 TNC 135 + 124 1 x UWF 802 M From stock liquidation, partly not functional / in need of repair Price VHS / against bid The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

approved
dealer
Machine: HERMLE UWF 801
New in: 1983
used
TOP Seller: Land-de Martin Beschle Werkzeuge & Maschinen GmbH
Location:: 78267 Aach

NC Universal Tool Milling Machine HERMLE UWF 801 With dot – route control Heidenhain TNC 135 Year of Make: 1983 Travel: X 500 Y 420 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Rigid angle table 800 mm x 400 mm clamping surface Hydraulic tool clamping Extendable drill quill Chip tray Machine Light Automatic central lubrication pump 15 SK 40 tool holders 1 collet holder with 15 collets 4 pcs machine shoes Coolant Setup Operating instructions

date: 11.10.2024 item-No.: 6130511
approved
dealer
Machine: HERMLE UWF 721  CNC
New in: 1987
used
Seller: Land-sk FORMEX SK s.r.o.
Price: 2.600 €

Main drive - spindle motor at 2450 RPM power - 4,5 kW spindle speed within four gears - infinitely variable speed range 20-4000, tool holder horizontal and vertical ISO 40 tool CLAMPING hydromechanisch 1200 daN, Quill stroke vertical fur 80 mm feed drive - single DC motors 1-2000 mm / min feed force in all axes each axis 5400 N, rapid traverse in all axes 5 m / mon workspace - along x axis 500 mm, cross y axis 360 mm, vertical z-axis 400 mm measurement - measurement of X, Y, Z - direct, resolution 0.001 mm, input gauge 0.001 mm, display step 0.005 mm, resolution 0.001 mm table AUFSPANNFLaeCHEN of rigid 4.Achse angle table 800 x 390 mm number and distance of T-grooves, wide T-slots 6/63/14 h7 ...

approved
dealer
Machine: DECKEL MAHO HERMLE WMW diverse UWF FP
used
Seller: Land-de Frank Sprengel Metallbearbeitungsmaschinen
Location:: 46240 Bottrop
VS

Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 ...

approved
dealer
Machine: HERMLE UWF 721 TNC 155
New in: 1986
used
Seller: Land-at AUER
Location:: A - Oberösterreich

x/y/z = 500/360/400 mm, max. 4000 rpm, 4 clamping corner, 1 pushbutton, various shots, cabinet Lista  ...

  • more information

approved
dealer
Machine: HERMLE UWF 1001
New in: 1989
used
Seller: Land-de Schweizer Service

With CNC control, HEIDENHAIN, Type: TNC 155, measuring taster Separate control cabinet: 1260 x 500 x 1700 mm Travel distances 700 x 550 x 550mm Table area 1000 x 490 mm Accessories: Treatment / Cooling system / tool shots The machine stored since 2013. At the time of storage, the machine was fully functional.; ready for use

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)