used Drilling Machines for sale

Description: Drilling capacity in steel 13 mm Projection 175 mm Drilling stroke 60 mm Speed 480 - 4000 rpm Table 230 x 220 mm Total power requirement 1.0/400 kW/volt Tool holder 2 Machine weight approx. 90 kg Dimensions L x W x H 0.5 x 0.3 x 0.85 mApprox. Onsite Dimension. (l x w x h): 500 x 300 x 850 mm, weight approx.: 90 kg

Tool holder: MK 2 Drilling capacity: 18 mm Speed range, infinitely variable: 200 - 3600 rpm Spindle stroke: 95 mm Table size: 310 x 220 mm Outreach: 215 mm Column diameter: 75 mm Engine power: 0.55 / 1.1 kW Connection: 380 V / 16 A Weight: 95 kg Dimensions LxWxH, approx.: 700 x 450 x 880 mm Facilities: - Stepless speed adjustment - Drilling depth stop - Speed display - Drilling chuck Albrecht 3-16 mm Note: The column sinks into the table.

table surface area: 170 x 170 mmbase plate surface area: 170 x 170 mmthroat: 185 mmquill stroke: 65 mmspindle turning speed range: 500 / 896 / 1473 / 2428 U/mincolumn diameter: 65 mmtotal power requirement: 0,37 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Operating hours run: 26459 Operating hours load: 18317 Delivery pressure 11 bar Liter output 2920 l/min Operating hours 18317 / 26459 h Operating voltage 400 V Total power requirement 5.5 kW Machine weight approx. 220 Kg Space requirement approx. 1800 x 800 x 1200 mmApprox. Onsite Dimension. (l x w x h): 1,800 x 800 x 1,200 mm, weight approx.: 220 kg

Description: Drilling and milling machine: - Digital Depth Gauge - Adjustable guides by gibs - Big 12 stage speed range 75-3200 rev / min - Quiet operation due to hardened and ground gears in oil bath - Forward and reverse running - Prismatic guides in all axes - Gear head pivots through 90 ° - Chip guard with safety circuit - Threading attachment - Bellows cover Y + Z-axis, - ISO 40 Drill chuck Without an under-table, is available as an option. Drilling capacity in steel 40 mm Projection 290 mm Drilling stroke 130 mm Spindle taper SK 40 Spindle speeds 75-3200 U / min Millinghead vertical adjustable 350 mm Table adjustment across 230 mm Table adjustment along 520 mm Table area 730 x 210 (800x2 mm Supply voltage 400 V Total power requirement 1,5 kW Machine weight about 0.32 t Space needs about 1.1 x 0.86 x 1.15 mApprox. Onsite Dimension. (l x w x h): 1,100 x 860 x 115 mm, weight approx.: ...

Description: Precise, smooth-running standard drilling machine in a modern design. Many options included. - Emergency stop push button - Full engine protection - Spindle / base plate distance 529 mm - T-slot width 10 mm Drilling capacity in steel 14/15 mm Projection 180 mm Drilling stroke 70 mm Speed 420 - 2100 U / min Table 250 x 220 mm Distance drilling head - clamping surface max. 380 mm Total power requirement 0.5 / 1.0 / 400 kW / volt Column diameter 65 mm Tool holder MK 2 Machine weight approx. 0.08 t Dimensions L x W x H 0.4 x 0.5 x 0.9 mApprox. Onsite Dimension. (l x w x h): 400 x 500 x 900 mm, weight approx.: 80 kg

Description: Table dimensions 170 x 170 mm , Rotational speed range 215 to 4200 rpm Includes small viceApprox. Onsite Dimension. (l x w x h): 600 x 250 x 990 mm, weight approx.: 50 kg

Inv. Num. : 3496 Type: TMH 3 Producer: MICRON Generated: Parameters: To GO 11 holes can be drilled at the same time Minimum distance between holes: 32.8 mm Drilling diameter: 3 mm Speed: 24 - 1415 rpm

NEW - Electronics 230V - from spare parts warehouse.

Key data: 35 mm

New drill motor 230V - Part No. TB02752

NEW - Electronics 230V from spare parts warehouse.

NEW electronics 230V - TB09050-1 - from spare parts warehouse

NEW - TB08148-1 - Electronics 230V from spare parts warehouse.

Radial Drilling Machine NOVISA NTR 1600 Spindle: CM5 Spindle exit Travel: 350 mm Spindle speed: from 25 to 1900 RPM Arm travel: 1600 mm Mini height in low position: 800 mm Max height in height position: 1500 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2600 x 1200 x 3000 mm Weight: approx 4 T

Description: Bench drill - Left/right rotation Drilling capacity in steel 25 mm Projection 180 mm Drilling stroke 80 mm Speed 200 - 2240 rpm Table mm Total power requirement 0.75 / 400 kW / volt Tool holder 2 Machine weight approx. 80 kg Dimensions L x W x H 0.5 x 0.3 x 1000 mApprox. Onsite Dimension. (l x w x h): 500 x 300 x 1,000 mm, weight approx.: 70 kg

Series No.: 12661418 Year of construction: 10/1998 rpm: 65 – 2000 Cone: MK3 Country of origin: Taiwan

Description: Bench drill - Rotating and swiveling table Drilling capacity in steel 20 mm Projection 155 mm Drilling stroke 80 mm Speed 50 - 3100 rpm Table 310mm mm Total power requirement 1.5 / 400 kW / volt Tool holder 2 Machine weight approx. 70 kg Dimensions L x W x H 0.6 x 0.4 x 0.9 mmApprox. Onsite Dimension. (l x w x h): 600 x 400 x 900 mm, weight approx.: 70 kg

Description: SPECIFICATIONS Drill-mill combination Brand: Sip Hauser Type: MP-53 Control: Bosch micro 8 Year of construction: 1983 Table length: 1020 mm Table width: 720 mm Displacement: X = 900 mm, Y = 600 mm, Z = 200 mm, Z2 = 635 mm Maximum table load: 800 kg Approx. Onsite Dimension. (l x w x h): 2,200 x 2,300 x 2,700 mm, weight approx.: 6,500 kg

Description: swivelling 360°, lowering stroke 100 mm, table support 300 x 400 mmApprox. Onsite Dimension. (l x w x h): 400 x 600 x 1,700 mm, weight approx.: 250 kg

Description: Drill spindle 940 to 8000 rpm Table dimensions 200 x 155 mm ,Approx. Onsite Dimension. (l x w x h): 500 x 350 x 680 mm, weight approx.: 60 kg

Radial drilling machine. Drlling capacity: 40-50mm. Arm of 1250mm. Taper Morse 5.

Soraluce TR1-1600 radial drilling machine. Arm of 1600mm. Drilling capacity in steel: 60mm. Drilling capacity in foundry: 80mm. Boring capacity in steel: 100mm. Boring capacity in foundry: 120mm. Thread capacity in steel: 50mm. Thread capacity in foundry: 70mm. Spindle diameter: 90mm. Travel: 350mm. Taper morse 5. 12 speeds. Motor power: 7,5hp.

Radial drill Soraluce TR3-2500mm. 2500mm arm. Drilling in steel: 80mm. Drilling in cast iron: 100mm. Chuck spindle diameter: 110mm. Cone Morse 6. Speeds: 16 (20-1475rpm). Engine power: 10hp.

Machine No.: 405823 Drilling capacity: D25 mm Projection: 255 mm Drilling depth: 135 mm Tool holder: MK3 Engine power: 0.65 / 0.9 kW Speeds: 8 / 105 – 2900 rpm Table: 500x400 mm Weight: 180 kg

Description: 23 mm drilling capacity Number of heads 2 Spindle stroke 110 mm Motor power 0.55 / 1.1 kW Speed 190 to 5250 rpm Column diameter 100 mm Distance between columns 1200 x 600 mm Separate sprayingApprox. Onsite Dimension. (l x w x h): 1,300 x 700 x 1,600 mm, weight approx.: 450 kg

bore capacity in steel (diameter): 35 mmthroat: 350 mmquill stroke: 160 mmtable surface area: 316 x 400 mmfeed: 0,1 - 0,2 - -0,3 m/minturning speeds: 160-480 / 480-1750 U/minbore capacity in cast iron: 45 mmbase plate: 950 x 580 mmspindle taper: MK 4 column diameter: 140 mmvoltage: 388 V / 50 Hzspindle diameter: 50 mmcoolant pump: 0,1 kWspindle drive: 2,2 kWtotal power requirement: 2,3 kWweight of the machine ca.: 0,5 tdimensions: 0,7 x 0,5 x 2,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Operating voltage: 230 V Frequency: 50 Hz Connection: 350 W Speed: 590 - 2650 rpm Table dimensions: 160 x 160 mmApprox. Onsite Dimension. (l x w x h): 460 x 230 x 600 mm, weight approx.: 20 kg

Description: Operating voltage: 230 V Frequency: 50 Hz Connection: 350 W Max. drill diameter: 13 mm Speed: 620 - 2620 rpm Table dimensions: 160 x 160 mmApprox. Onsite Dimension. (l x w x h): 400 x 300 x 700 mm, weight approx.: 20 kg

Description: Including mobile base frame and additional taps with holderApprox. Onsite Dimension. (l x w x h): 900 x 650 x 2,000 mm, weight approx.: 300 kg

Description: Table dimensions 360 x 335 mm ,Approx. Onsite Dimension. (l x w x h): 600 x 400 x 850 mm, weight approx.: 60 kg

Manufacturer: UNION - Gemany Model: BFT 130 / 5 Condition: very good New in.: 1978 / 2000 , the machine was completely modernized for Company ALSTOM Control: conventional with Heidenhain Linear readings in 3 axes Technical details: Spindle diameter: 130 mm Spindle speed: 4.5 - 900 rpm Spindle cones: MORSE 5 ( the price of the machine will deliver free of charge adapter for ISO 50 ) X axis: 1600 mm Y axis: 1600 mm Z axis: 2500 mm W axis: 1000 mm Table: 1600 x 1400 mm Table Rotation: 360 Charging the table: 8000 kg Speed: 4.5 to 180 rpm Power range: 0.63 to 2000 mm / min Fast forward: 2 m / min Total required power: 35 kW Approximate Weight: 47000 kg EQUIPMENT: Heidenhain readings line in three axes, flat disc

Description: Drilling and milling machine with - variable spindle speed - cross support - rotating spindle head left/right 90° - Feed via hand crank Drilling capacity in steel 16 mm projection 185 mm Drill stroke 50 mm Capacity end mill 20 mm Spindle mount MT 2 Spindle speeds 100-1500 / 200-3 rpm Table adjustment across 175 mm Table adjustment longitudinal 280 mm Table clamping area 500 x 180 mm Connection voltage 230 V Total power requirement 0.85 kW Machine weight approx. 0.12 t Space requirement approx. 0.86 x 0.6 x 0.9 mApprox. Onsite Dimension. (l x w x h): 860 x 600 x 900 mm, weight approx.: 120 kg

Description: Table dimensions: 1180 x 280 mm Table working height: approx. 860 mm Speed examples: 1400 - 14000 rpm, 450 - 4500 rpmApprox. Onsite Dimension. (l x w x h): 1,380 x 820 x 1,600 mm, weight approx.: 2,500 kg

Description: Bench drill CE-tested spindle hood. Keyless chuck (1 to 16 mm) Tilting work table. Depth stop. Drilling capacity in steel 20 mm Projection 180 mm Drilling stroke 82 mm Speed 220-2840 rpm Table 290 x 290 mm Total power requirement 0.55 / 0.75 kW / volt Machine weight approx. 54 kg Dimensions L x W x H 820 x 500 x 290 mmApprox. Onsite Dimension. (l x w x h): 820 x 500 x 290 mm, weight approx.: 54 kg

Description: WOERNER 4-Head Table DrillApprox. Onsite Dimension. (l x w x h): 1,550 x 800 x 1,700 mm, weight approx.: 1,100 kg

Description: Drilling spindle taper B12, diameter 19/12 mm Stroke (drilling depth) 70 mm Table: 240x220 mmApprox. Onsite Dimension. (l x w x h): 655 x 330 x 600 mm, weight approx.: 50 kg