We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
used REG-MAC EPS 75 Press screw. Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
used
used HERBOLD T 2016 PA. Dry cleaner/ friction cleaner with 110 kW drive power. Throughput approx. 1 -2.5 t/h depending on type of plastic and material thickness
used
used Doppstadt DW 3060 Biopower. Shredder for green waste, biomass, roots, bulky waste, waste wood, commercial waste, etc., equipment: radio remote control, hydraulic travel drive, overbelt magnet, auxiliary hydraulics, humidification for dust binding for external water connection, service and tools new. SPECIAL FEATURE: Engine original MTU- Mercedes NEW due to dust damage.
used
used WaterTecnik Effluent treatment system. WaterTecnik Effluent treatment system 2019, 20ft container with internal plant and external tanks, Effluent is high in FOG and suspended solids. In order to legally discharge this effluent to a sewer a water tecnik DAF system needs to be installed, contact for list of components
used
used Ammann BB650mm Dosing Conveyor Belt. Dosing Conveyor Belt Ammann Brand: Ammann A.A length = 1200 mm. Belt width: 650 mm. Drive: 2.2 kW slip-on gearbox Speed approx. 0.8 m/sec In stock: 6 pieces.
used
used Kleemann 40x40mm Galvanized handrails for walkways. Galvanized handrails for walkways Brand: Kleemann Dim.: 5000 mm length - 1240 mm height Made of square tubular profile 40x40 mm In stock: 45 pieces.
used
used Metso. Metso screening machine Brand: Metso Screen area: 5300 x 2000 mm - 3 deckers Propulsion : 18.5 kW electric motor. This version is also available in 2 deckers.
used
used Avermann MK-380. Specifications Maximum pressure: 4.6 tons Press force: 1.31 kg/cm² Bale size: 500x700x700 mm Power supply: 400 V/ 1.1 kW Year of construction: 1993
used
used Presto CC 20 M (#9874). Baler Presto CC 20 M, built in 2019, baling force 20 t, with restraint device Specifications: Manufacturer: Presto Type: CC 20 M Year of construction: 2016 Press force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Binding: 4-ply, tape, manual Throughput at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance pa ...
used
used BPS Recyclinganlagen T 25-16 Turbine Mill / Pellet Mill. Used and refurbished turbine mill from Tecnoecology for the digestion of old cables, especially fine strands or computer cables. Balling takes place at about 3,000 rpm. The tools are rotatable and have 4 usable edges. The turbine mill can be operated stand-alone or integrated into an existing system without a pellet mill. The machine has a 20 kW drive and can process up to approx. 300 kg of material per hour.
used
used BPS Recyclinganlagen IRS C 180 Kombiline. Machine for processing mixed old cables including fine conductors and stranded cables, Due to the special rotor system and the large flywheel masses, the system is also suitable for operation in manual insertion. The machine is equipped with a cooling unit that optimizes the granulator with a flow temperature of 0.5 °C for the use of heat-sensitive cables, such as NYM etc. The control electronics of the system enable fully automatic operation in a line with pre-shredder, conveyor belt, dosing accumulator, etc. The machine includes several sets of knives and different screens.
used
used BPS Recyclinganlagen JMC McIntyre 407i. The JMC 407 is the top seller among our alligator claws. It is cost-effective, has sufficient knife length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, piping, motors, gearbox housings. The scissors are also often used for cleaning scrap metals or cutting vehicle radiators. The machine is equipped with a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. By means of a foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted by means of simple clamping screws. The scissors are from our demonstration pool and can be viewed or tested.
used
used Project. Complete project for the construction of a mobile drum screening plant Complete production documents for a newly developed car-mobile drum screening plant -Complete set of drawings -Bom -Electrics must be adjusted during initial assembly -2.5 to car mobile drum screen -Capacity: from 25 cbm/h -Propulsion: Diesel generator, generator or direct external feed-in for electricity -no prototype produced yet Price is net plus VAT. Trade-in possible Further data is available on request.
used
used RMH 50 x 30 T 65. Package dimension in cm: 50 x 30 Weight: 4900 kg Dimensions ( L x W x H ): 1100 x 500 x 540 mm Propulsion: 11 KW Ground driving pressure: 65 t Control: Manual With side loading box
used
used BANO MAC400. AGICOM recycling machines: Very good, almost as good as new single-shaft shredder for old cables, wood The cutting width or rotor length is 400 mm, 30 mm indexable cutting plates are installed. The machine has a hydraulically driven gate valve equipped with pressure monitoring. The machine has only 35 hours of operation and is still coated with the original paint in the cutting room. • Year of construction 2007 • Propulsion: 9.2 kW • Hydraulic pusher: 1.5 kW • Weight of single-shaft shredder Bano MAC400: approx. 850 kg
used
used HSM VL 500.2 (#9870). Vertical baler HSM VL 500.2, built in 2005 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2005 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
used
used HSM VL 500.2 (#9872). Vertical baler HSM VL 500.2, built in 2005 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2005 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
used
used HSM VL 500.2 (#9871). Vertical baler HSM VL 500.2, built in 2007 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2007 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
used
used HSM VL 155.2 (#9873). Vertical baler HSM 155.2 VL, built in 2003 Specifications: Manufacturer: HSM Type: 155.2 VL Year of construction: 2003 Press force: 16 t Drive power: 4 kW Filling opening: 1100 x 590 mm Filling height: 730 mm Press box dimensions: 1100 x 700 x 1130 mm (WxDxH) Bale size: approx. 1100 x 700 x 700-1000 mm Capacity per hour: approx. 4-8 bales Theor. Idle cycle time: 24 s Dimensions: 1400 x 1200 x 2300 mm (WxDxH) Weight: 1300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
used
used Vecoplan VAZ. COMPLETE REFUSE-DERIVED FUEL PLANT WITH HIGH CAPACITY Year of construction 2009 13,500 operating hours - 1 x pre-shredder TYPE VECOPLAN - 1 x Magnet - 1 x air classifier TYPE WESTERIA - 3 x secondary shredder type VECOPLAN - approx. 150 meters of conveyor belts - Electrical control - Spare parts worth approx. € 70 000 Installed capacity approx. 1200 kW Product size 25 to 80 mm according to customer's requirements. We can dismantle the system and load it onto trucks.
used
used S+F ASM-100. S&F Screening Machine | Vibrating Screening Machine Type ASM-100 used (as good as new) Make: S&F GmbH Type: ASM-100 - #1 Year of construction: 2016 Condition: as good as new Screening capacity: approx. 5 - 10 m³/h (for cross-cut wood, wood chips and sawdust) Fractions: 2 Screen area: 1.0 m² per screen mesh size Screen decks: 1 piece Mesh size of sieve: - 1st screen deck: perforated sheet screen punched, D = 20 mm or by arrangement. Drive power: 1.1 kW L x W x H: 2,300 x 1,250 x 1,050 mm Design: ECO Line Machine weight: approx. 600 kg Machine colour: RAL 6011 Reseda green Screen inserts freely selectable Design of the material outlet according to customer requirements The screening machine has been checked, painted and is in a very good condition (as good as new) (see pictures). Vibrating screen was restored (flange bearings) and new vibrating ...
used
used Paal Pacomat III-50 C. Manufacturer: PAAL Type: PACOMAT III 50 C Operating hours: approx. 1,750 hours Year of construction: 2014 Specifications: Press force: 486 kN (50 t) Specific pressing force: 6.5 kg/cm² System pressure: 315 bar only free kicks Drive power: 22 kW Main pump capacity: 130 l/min. Total connected load: 39 kW, Nominal current: 83 A Back-up fuse min.: 100 A Back-up fuse max.: 100 A Throughput at idle: approx. 295 m³/h Throughput under operating conditions: approx. 120 m³/h Output at 35 kg/m³: approx. 4.2 t/h Capacity at 50 kg/m³: approx. 6.0 t/h Filling opening: 1,200 x 920 mm Duct format: 750 x 1,000 mm (H x W) Oil tank volume: 750 ltr. Control: Siemens S7-300 Machine dimensions: approx. 8,000 x 2,000 (4,100) x 2,460 mm (L x W x H) Machine weight: approx. 12 t
used
used Svedala 2200-1200 Feed chute. Feeding chute Svedala Brand: Svedala Length 2200 mm - Width 1200 mm with two vibration motors of 1.3 kW each
used
used PAAL Pacomat 5. Specifications Maximum pressure: 50 tons Press force: 7.14 kg/cm² Duct cross-section: 1000 x 700 mm Bale weight: do 500 kg Power supply: 400 V/ 30 kW Number of ties: 3 horizontal Dimensions of the tailgate: 1250 x 950 mm Weight: about 10 tons Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the duct. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the press chamber for easy maintenance
used
used PAAL Pacomat V-80 C. Specifications Maximum pressure: 65 tons Pressing force: 84 tons/m² Duct cross-section: 1000 x 750 mm Bale weight: do 550 kg Power supply: 400 V/ 45 kW Year of construction: 2011 Number of ties: 4 vertical Dimensions of the tailgate: 1400 x 920 mm Weight: approx. 13 tones Bale tying: automatic
used
used Forrec AE-600R. Forrec AE-600R single-shaft shredder: Used and very powerful single-shaft shredder for a wide range of applications. Easy replacement of perforated screen, hydraulic pusher Technical data shredder Forrec AE-600R: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight shredder Forrec AE-600R: approx. 1600 kg
used
used SAW Werschkull 4100 1520. For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg
used
used Macfab 75. We offer one of our new paper balers from MacFab for sale. This is the "75" model. We have several in use, since we have currently closed a location, the press will now be handed over. It is in absolutely excellent condition. It was on weekly duty from August 2023 to February 2024. Details can be found in the pictures. If you have any further questions, please do not hesitate to contact us!
used
used Pellenc Mistral 800. - Complete system - incl. conveyor belt width 800 mm - Incl. discharge hood with separating parting - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015
used
used Pellenc Mistral 2400. - Complete system - incl. conveyor belt width 2400 mm with NEW CONVEYOR BELT - Incl. discharge hood with separating parting - INCL. BLOWER FOR FOIL SORTING - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015
used
used Pellenc Mistral 2400. - Complete system - incl. conveyor belt width 2400 mm with NEW CONVEYOR BELT - Incl. discharge hood with separating parting - incl. ADDITIONAL METAL DETECTOR - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015
used
used Kleemann SHB 14. Kleemann Impact Mill Brand: Kleemann. Type: SHB 14 Inlet opening: 1430 x 950mm Incl.: electric motor and inlet box
used
used Kleemann 18/55-3. Screening machine Kleemann 18/55-3 Brand: Kleemann Screen surface: length 5500 mm, width 1800 mm - 3 deckers Incl.: engine and springs.
used
used Metso-Nordberg 1315 SR Impact mill. Impact mill Metso-Nordberg Brand: Metso / Nordberg Type: 1315 SR Inlet opening: 1550 x 950mm
used
used Strautmann BaleTainer. Specifications Maximum pressure: 60 tons Press force: 156 t/m² Bale size: 1100 x 1100 x 700 mm Bale weight: 400 kg Power supply: 400V/ 13kW Year of construction: 2014 Dimensions of the tailgate: 2815 x 1085 x 2250 mm Machine weight: 7.5 t The machine is functional
used HERBOLD EPS 75 Press screw. Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
used
used Erdwich/Erema Z 780 H. Twin shaft shredder from Erdwich, opening 800x780 mm, hydraulic drive 30 Kw., with control cabinet mounted on frame. 1 set of new knives additionally available.
used
used Bezner TWD. Bezner Screening Machine | Roller classifier type TWD Refurbished (workshop overhauled) - Make: Bezner - Type: TWD - Condition: refurbished - Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) - Screen area: 6.0 m² per screen mesh size - Fractions: 3 - Screen decks: 2 pieces - Drive power: 5.5 kW - L x W x H: 4,000 x 2,200 x 1,700 mm - Machine weight: approx. 5,500 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of the spouts according to customer requirements Screening machine overhauled. Spherical roller bearings and ball plates are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibrating screen | Wood chip sieve | Vibrating Screening Machine | Standin ...
used
used Kleemann SHB12. Kleemann Impact Mill Brand: Kleemann. Type: SHB 12 Inlet opening: 1430 x 1050mm Incl.: steel construction and inlet box.
used
used SBM Austria HSB 125/112 4F. Impact mill SBM Austria Brand: SBM Austria Type: HSB 125/112 4F for hard rock Inlet opening : 1150 x 450 mm Incl.: E-Motor & Hydroliek-unit