We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 104)
used
Machine Type: Horizontal Belt Sander Manufacturer: NAPP Model: TB 200 Condition: ready for use Offer Type: Used Machine Specifications: Sanding area: 200 x 920 mm Drive type: el./mech. Propulsion: 3 Hp Remark: integrated suction Weight: 80 kg The machine is in a ready-to-use condition and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.
new
width of the strips: 75 mmband length: 2000 mmband speed: 30 - 34 m/sectotal power requirement: 4,1 HPweight of the machine ca.: 75 Kgdimensions of the machine ca.: 1,2 x 0,5 x 0,85 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding length 500 mm Grinding width 250 mm Workpiece height 375 mm max. table load 350 kg Table longitudinal movement 525 mm Table feed 2-28 m/min Total power requirement 4.5 kW Machine weight approx.1900 kg Control NC Height: approx.2.60 m Width: approx. 2.10 m Depth: approx. 2.00 m Total weight with cooling lubricant container: approx. 2.3 t.
used
grinding length: 600 mmgrinding width: 300 mmworkpiece height: 340 mmtable surface area: mmmagnetic plate size: 500 x 300 mmgrinding wheel speed: U/min.max. dia. of grinding wheel: 355 mmmax. width of grinding wheel: 48 mmtotal power requirement: kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,3 x 1,6 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7361 Type: MS 248 Producer: STANKO Generated: Parameters: The mill is in good condition.
new
saw blade diameter: 80 - 700 mmworkpiece-spindlehead motor: 0,25 kWgrinding wheel diameter: 125 mmturning speeds: 2850 U/mingrinding range: -20 bis +20 Gradweight of the machine ca.: 12 Kgdimensions of the machine ca.: 700 x 400 x 300 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7292 Type: FS30 Producer: LINDNER Created: GO 1999 Parameters: Machine weight: 3900 kg The grinder is in good condition.
new
width of the strips: 150 mmband length: 2000 mmband speed: 30 - 34 m/sectotal power requirement: 4 kWweight of the machine ca.: 100 Kgdimensions of the machine ca.: 1,2 x 0,5 x 0,85 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7293 Type: FS30 Producer: LINDNER Generated: Parameters: The grinder is in good condition.
new
grinding wheel diameter: 250 mmconnected load frequency: 230 V: 90 - 180 U/minweight of the machine ca.: 18 Kgdimensions: 470 x 300 x 440 mKnife sharpening device with variable speedGrinding wheel 250 x 50 x 12mm, grit 220Leather disc 200 x 30 x 12mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7463 Type: G80 Producer: Göckel Created: 1987 Parameters: Table length: 3100 mm Table width: 400 mm Machine height: 2000 mm Machine length: 8000 mm Machine width: 3000 mm Machine weight: 14000 kg
new
diameter: 250 mmworkpiece length: max. 150 mmconnected load frequency: 230 Vtotal power requirement: 0,2 kWweight of the machine ca.: 5 Kgdimensions: 0,25 x 0,25 x 0,4 mThis drum is ideal for polishing, deburring and cleaning parts. Depending on the coarseness of the medium used, you can polish it fine. The bowl is made of a heavy polymer. The diameter of the bowl is about 25 cm. In this bowl can be filled about 8 kg of media. Suitable for parts up to approx. 15 cm in length. The drum is delivered without media. For example, you can use corundum, glass bead or ground walnut shell.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7464 Type: G100 Producer: Göckel Created: 1987 Parameters: Table length: 2500 mm Table width: 600 mm Machine height: 2300 mm Machine length: 7000 mm Machine width: 3000 mm Machine weight: 14000 kg
new
width of the strips: 100 mmband length: 915 mmdimensions of grinding wheel: 200 x 32 mmgrinding wheel hole diameter: 30 mmtotal power requirement: 0,9 kWweight of the machine ca.: 35 Kgdimensions of the machine ca.: 620 x 540 x 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7466 Type: AR61 Producer: Reform Created: 1988 Parameters: Control system: Simatic Table length: 2500 mm Table width: 600 mm Machine height: 2400 mm Machine length: 11000 mm Machine width: 3200 mm Machine weight: 22000 kg 2021: Conversion of the control system to Simatic and overhaul of the Z-axis
new
width of the strips: 100 mmband length: 1220 mmband speed: 1140 m/min.: 0,62 x 0,4 x 0,35 cmtotal power requirement: 1,5 kWweight of the machine ca.: 0,04 tdimensions: 0,97 x 0,67 x 0,37 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7411 Type: R6-5000 Producer: Kolb Created: 1981 Parameters: Grinding diameter: 605 mm Maximum weight of the workpiece: 3000 kg Distance between tips: 5000 mm Machine weight: 17900 kg
new
width of the strips: 100 mmband length: 1250 mmband speed: m/sectube diameter: 16,5 - 90 mmangle adjustable from - to: 0 - 65 Gradconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0,18 tdimensions of the machine ca.: 1,2 x 0,6 x 1,3 mipe grinding machine with 10 grinding rollers:16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mmPipe clamping area 90mmDocumentation (English)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7417 Type: BSM 1300 RRDB Producer: RWT Created: 2015 Parameters: Vacuum belt width: 1300 mm Diameter of grinding rollers: 180 mm Feed roller diameter: 50 mm The thickness of the workpiece: 0.5-160 mm Abrasive belt speed: 18 m/s Weight: 2840 kg
new
grinding range: 8 - 32 mmsharp cornered angle min./max.: 90 - 140 Gradconnected load: 230 Vweight of the machine ca.: 16 Kgdimensions of the machine ca.: 0,43 x 0,24 x 0,24 mDrill grinding machine:Additional station for grinding back the drilling cutting surface (clearance angle)25tk. Collets ER 40 are included in the scope of delivery, these are also suitablefor clamping intermediate sizes. For grinding twist drills made of HSS andHard metals with a TiN layer of 8 - 32 mm.Rotor with precision ball bearings guarantees smooth running.Vibration-free running thanks to its heavy weight and rubber feet.Sharpening angle adjustable for all common twist drills.Package dimensions:430 x 240 x 240mm.Weight 16kg.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7471 Type: UPFS 150/88 XYZ Producer: DOEBELI Created: 1991 Parameters: Control system: Bosch Table diameter: 250 mm Axis X: 150 mm Axis Y: 50 mm Axis Z: 60 h Equipment: Filtration Coolant tank
new
width of the strips: 100 mmband length: 2000 mmband speed: m/sectube diameter: 16,5 - 76 mmangle adjustable from - to: 0 - 65 Gradconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0,17 tdimensions of the machine ca.: 1,3 x 0,7 x 1,1 mipe grinding machine with 10 grinding rollers:16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mmPipe clamping area 90mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7472 Type: UPFS 150-117 Producer: DOEBELI Created: 1995 Parameters: Control system: Bosch Table diameter: 250 mm Axis X: 150 mm Axis Y: 50 mm Axis Z: 60 mm Equipment: Filtration Coolant tank
used
width of the strips: 75 mmband length: 2000 mmband speed: 2850 m/mintube diameter: mmangle adjustable from - to: Gradconnected load frequency: 400 Vtotal power requirement: 4,0 kWweight of the machine ca.: 0,18 tdimensions of the machine ca.: 0,5 x 1,4 x 1,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7462 Type: G130 Producer: Göckel Created: 1987 Parameters: Control system: Sinumerik 810 Table length: 7500 mm Table width: 1000 mm Machine height: 3500 mm Machine length: 15000 mm Machine width: 3500 mm Machine weight: 45000 kg Equipment: 500 ceramic and 500 bakelite grinding segments 2016: Conversion of the control system to Sinumerik 810
new
grinding range: 2 - 13 mmsharp cornered angle min./max.: 90 - 140 Gradconnected load: 230 Vweight of the machine ca.: 10 Kgdimensions of the machine ca.: 0,35 x 0,2 x 0,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7459 Type: GU-A Producer: LINDNER Generated: Parameters: The mill is in good condition.
new
max. dia. of grinding wheel: 250 mmgrinding wheel width: mmtaper diameter: mmtable-size: 420 x 240 mmconnected load frequency: 400 Vengine output: 0,55 KWweight: 200 kgdimensions: 1,15 x 0,72 x 1,4 mSteel grinding machine- Left-right rotation- Coolant system- Tables swivelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7192 Type: BU 28/630 CNC Producer: TOS Created: GO 2004 Parameters: Total power requirement: 10 kVA Maximum grinding length: 630 mm Tip stroke: 140 mm Maximum weight of the workpiece: 65 kg Distance between tips: 630 mm Machine height: 1600 mm Machine length: 3750 mm Machine width: 2300 mm Machine weight: 3000 kg
used
width of the strips: 100 mmband length: 2000 mmband speed: m/sectube diameter: 25,4 - 76,2 mmangle adjustable from - to: 30 - 90 Gradconnected load frequency: 400 Vtotal power requirement: 4,0 kWweight of the machine ca.: 0,2 tdimensions of the machine ca.: 0,5 x 1,5 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.