We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 106)
used
Capacity 100 ton Table 880x715 mm Max. sheet thickness 3 mm Stroke per min. 360 Stroke 25 mm Ram adjustment 70 mm Distance Ram-table 400 mm 15 kW Dimensions LxWxH 3300x1600x2600 mm Total weight 10 tons
used
Description: Eccentric press Serial number 8189 Table dimensions: 800 x 500 mm Nominal force: 630 kN Adjustable stroke: 10-140 mm Cycles per minute: 70 , Total installed power: 5.5 kW Working pressure: 5.5-6 Bar CE standardMax. pressing force: 63 to, table surface area l x w : 800x500 mm, weight approx.: 5,100 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,600 x 2,900 mm
used
HAULICK HPV 75 Eccentric Press Maximum pressing force 75 t Bottom working table 640x540 mm Maximum number of strokes per minute (manual work) 50 spm Maximum number of strokes per minute (automatic work) 270 spm Min. length of the slider stroke 7 mm Max. length of the slider stroke 78 mm Certified by SCHULER 04.08.2012
used
Description: Machine number ,12.88.4715 Operating pressure 275 bar Ejection force 800 kN Follow-up time 110 ms Safety distance 176 mm Operating voltage 380 V Includes 2-hand operation and accessory cabinet  , Attention: without placement robotMax. pressing force: 250 to, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,400 x 3,900 mm, weight approx.: 16,000 kg, table surface area l x w : 1300x1000 mm
used
WEINGARTEN ER 100 Eccentric press Capacity 100 t Table 710 x 570 mm Sheet thickness 12 mm Number of strokes 55 spm Ram stroke 8-112 Ram adjustment 80 mm
used
Description: Machine number 04926102 Press force of the die cushions 40 to 400 kN Die cushion stroke 200 mm Stand passage 1450 mm, lateral 700 x 600 mm Includes control unit, 2-hand operation, ,documentation  , Attention: without loading robotMax. pressing force: 160 to, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,400 x 3,900 mm, weight approx.: 16,000 kg, table surface area l x w : 1400x1200 mm, stroke: 500 mm
used
EXNER EXSBR 200 hydraulic press YOM 8/1987 Serial No. 10042 Pressure 200 t Table 1800 x 800 mm Power requirement 65 kW Safety distance 195 mm Overtravel 52 mm Run-on time 120 ms Weight ca. 23 t
used
Description: Machine number 1800196 Outreach 360 mm Ram strokes 50/min Ram adjustment 100 mm Motor 18.5 kW Current voltage 400 VMax. pressing force: 160 to, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,400 x 3,200 mm, weight approx.: 13,000 kg, table surface area l x w : 1000x700 mm, stroke: 20 bis 140 mm
used
PKZZ 250 Double Column Crank stamping Press Completely overhauled. Electric and Control- Not available. Table 2500 x 1400 mm Ram 2320 x 1250 mm Distance between uprights 2525 mm Window in table width 2300 mm Window in table depth 850 mm Stroke 400 mm Strokes per minute SPM 12 Adjustment of ram 120 mm Shutheight 550 mm Table cushion force 50 to Cushion stroke 160 mm Motor 32 kW Weight ca. 39 tons
used
Description: Machine number 5391187 Ram strokes 110/min Ram adjustment 60 mmMax. pressing force: 60 to, stroke: 10 bis 90 mm, throat: 280 mm, table surface area l x w : 750x530 mm, total power requirement: 3 kW, weight approx.: 3,650 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,600 x 2,200 mm
used
Inv. Num. : 5696 Type: LE 160 Producer: Východoslovenské Strojárne Košice Created: 1977 Parameters: Compressive force: 160 t Maximum stroke rate per minute: 45 1/min Stroke: 20-120 mm Plunger adjustment: 100 mm Machine weight: 8700 kg
used
Description: Ram strokes 55/min Voltage 380 V Machine number 8695 Installation height 500 mmMax. pressing force: 130 to, stroke: 10 - 140 mm, throat: 350 mm, table surface area l x w : 980x700 mm, total power requirement: 11 kW, weight approx.: 11,000 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 2,400 mm
used
Inv. Num. : 7360 Type: CLH 630 1/8 Producer: Vihorlat Snina Created: 1985 Parameters: Compressive force: 630 t
used
Description: Machine number 7470 , Pressure capacity of the drawing cushion 400 KN Stroke of the drawing cushion 200 mm , Rapid lowering speed approx. 400 mm/s Working speed approx. 57 mm/s Return speed approx. 310 mm/s Drive power 22 kW ,Max. pressing force: 160 to, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,300 x 2,500 mm, weight approx.: 12,000 kg, table surface area l x w : 1400x600 mm, stroke: 500 mm
used
Inv. Num. : 7359 Type: TL-4-250 Producer: RTS Rakovník Created: 1997 Parameters: The machine is in good condition.
used
serial number: 2,977, Max. pressing force: 60 to, bending length: 1,600 mm, stroke: 60 mm, weight approx.: 2,400 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,200 x 2,100 mm
used
Inv. Num. : 7283 Type: PME 315 T Producer: WMW Generated:- Parameters: Compressive force: 315 t Table length: 2220 mm Table width: 1225 mm Maximum stroke rate per minute: 75 1/min Plunger adjustment: 130 mm
used
Approx. Onsite Dimension. (l x w x h): 4,200 x 1,600 x 2,500 mm, weight approx.: 3,000 kg
used
Inv. Num. : 7047 Type: HSP 600 AZ-RN a Producer: Brunnhuber Created: 1969 Parameters: Compressive force: 610 t
used
Approx. Onsite Dimension. (l x w x h): 4,000 x 1,800 x 2,500 mm, weight approx.: 3,000 kg
used
Inv. Num. : 7246 Type: HCFP Producer: Hidroliksan Created: 2022 Parameters: Compressive force: 100 t Table length: 1400 mm Table width: 1000 mm Stroke length: 700 mm Distance between frame walls: 1100 mm Machine height: 3100 mm Machine length: 1600 mm Machine width: 1600 mm Machine weight: 4000 kg
used
Description: Unused. Shrink range: 15-63mm Max opening: 75mm Voltage: 380V Wattage: 3000W Pressure: 535 Mpa Packing size: 780x540x1350 Weight Incl Packing: 280 KgApprox. Onsite Dimension. (l x w x h): 1,220 x 710 x 500 mm, weight approx.: 246 kg
used
Key data: 170 t, 3110 mm
Inv. Num. : 7140 Type: HG 1703 Producer: Amada Created: 2022 Parameters: Control system: AMADA AMNC 3i Duty cycle: 6664 h Hours: 5511 h Number of strokes: 450794 Compressive force: 170 t Maximum bending length: 3110 mm Maximum ram stroke: 250 mm Maximum lifting speed: 220 mm/s Maximum bending speed: 20 mm/s Maximum retraction speed: 250 mm/s Total power requirement: 30 kW Machine weight: 15000 kg Equipment: 5-axis backgauge Footswitch with panic stop function Angle Measuring System Digipro Safety device AKAS III Wila tenses Handwheel
used
Description: CNC press brake folding long 4300 mm between steander 3700 mm max. pressure 300 tons Power 33.5 kW stroke 300 mm Projection upright 400 mm DELEM DA-65W control system CNC crowning Hydraulic tool clamping no toolsweight approx.: 21,500 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 2,200 x 3,600 mm
used
Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg
used
Description: Machine number 8758 , Ram adjustment 85 mm , Ram strokes 60/min Voltage 380 VMax. pressing force: 100 to, stroke: 20 bis 110 mm, table surface area l x w : 900x700 mm, total power requirement: 7,5 kW, weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,500 x 2,800 mm
used
Inv. Num. : 6885 Type: C5 Producer: FINN POWER Created: 2007 Parameters: Compressive force: 300 kN Maximum length of the sheet plate: 3000 mm Maximum blade width: 1500 mm Max. sheet thickness: 8 mm Machine height: 2200 mm Machine length: 5570 mm Machine width: 5165 mm Machine weight: 13000 kg
used
Description: serial number B239002 , press force 1500 kN , sheet thickness: 0.5-15 mm bending lenght 4050 mm maximal stroke 1760 mm maximal working pressure 205 bar distance between columns 3150 mm distance from ram to bed 420 mm troath depth 400 mm power of main motor 11 kW supply / frequency 400 V, 50 Hz approach speed 80 mm/sec working speed 6 mm/sec return speed 45 mm/sec Approx. Onsite Dimension. (l x w x h): 4,280 x 1,545 x 2,500 mm, weight approx.: 12,925 kg
used
Inv. Num. : 6777 Type: PH4C 200 T Producer: Hidroliskan Created: 2015 Parameters: Compressive force: 200 t Table length: 1800 mm Table width: 1400 mm Distance between frame walls: 1400 mm Stroke: 600 mm Number of columns: 4 pieces
used
Description: Includes embossing stampApprox. Onsite Dimension. (l x w x h): 350 x 200 x 600 mm, weight approx.: 30 kg