Перевірений дилер
Детальніше
Weeke ProfilineL 220 Бурильна машина
вживанийПеревірений продавець
Запитати ціну
Безпосередньо продавцю
1 / 5
Технічні характеристики
· ID 169276706Вживані машини
- Стан
- вживаний
- Рік випуску
- 2008
- Місцезнаходження
- Finland
Identifikation
ВиробникWeeke
МодельProfilineL 220
Номер позиції8724625
Technik
Кількість1
Опис
Manufacturer: Weeke
Model: Profiline ABL 220
Year of Manufacture: 2008
Type of Machine : CNC drilling machine with fitting units
CE Certified: Yes
Electrical Specifications
- Operating Voltage: 400 V / 50 Hz
- Power: 24 kW
- Current: 50 A
- Control Voltage: 24 V DC
- Workpiece Dimensions
- Length: min. 250 mm / max. 2400 mm
- Width: min. 240 mm / max. 850 mm
- Thickness: min. 12 mm / max. 60 mm
The machine processes rectangular workpieces made of melamine-coated chipboard and
similar panel materials.
Machine Performance
- Machining capacity: approximately 300 to 350 furniture frames per 7.5-hour working shift.
- Axis Speeds:
- X-axis: 80 m/min
- Y-axis: 80 m/min
- Z-axis: 20 m/min
- Drilling Unit - V18 High Speed 7500
- Configuration: 18-spindle vertical drill unit (CONFIG-V18)
- Spindle Speed: 1500 to 7500 rpm (variable speed controlled)
- Direction of Rotation: Right / Left
- Stroke Length (Z direction): 60 mm
- Drilling Depth: max. 38 mm / max. 55 mm with special blade
- Shank Diameter: 10 mm
- Total Drill Bit Length: 70 mm
- Maximum Drill Hole Diameter: 35 mm
- Spindle Spacing: 32 mm
- Machining Capabilities
- Vertical drilling from above
- Horizontal drilling into the front corner of the workpiece
- Adhesive application to drill holes from above (gluing unit included)
- Installation of drawer slide rails (Tandembox type, two sizes: 270 mm and 450 mm)
- Installation of cylindrical shelf brackets from above
Additional Equipment Included
- 2 additional crossbars for attaching machining units (NC-controlled Y and Z)
- Additional drilling rig for front angle (longitudinal) drill holes
- Gluing unit - adhesive dispensing into drill holes from above
- 2 pick-up and crimping devices for Tandembox drawer slide rails
- 4 lifting devices for drawer guides (pneumatic)
- 2 compression units for cylindrical shelf brackets
- 2 vibrating conveyors for cylindrical rack brackets
- Wireless barcode scanner and barcode control software
- Ethernet network interface with switch (8-fold 10/100 Mbit)
- Emergency circuit breaker and HOMAG group machine connection
- Mobile remote control with 10 m cable
- Operating and maintenance documentation included
Installation Requirements
- Required room height: approximately 3450 mm
- Working height (IGEL Buffer): 950 mm
- Floor: Concrete C25/30, minimum thickness 180 mm
Find more here - .ucymachines/
Contact us at - sales@ucymachines
Model: Profiline ABL 220
Year of Manufacture: 2008
Type of Machine : CNC drilling machine with fitting units
CE Certified: Yes
Electrical Specifications
- Operating Voltage: 400 V / 50 Hz
- Power: 24 kW
- Current: 50 A
- Control Voltage: 24 V DC
- Workpiece Dimensions
- Length: min. 250 mm / max. 2400 mm
- Width: min. 240 mm / max. 850 mm
- Thickness: min. 12 mm / max. 60 mm
The machine processes rectangular workpieces made of melamine-coated chipboard and
similar panel materials.
Machine Performance
- Machining capacity: approximately 300 to 350 furniture frames per 7.5-hour working shift.
- Axis Speeds:
- X-axis: 80 m/min
- Y-axis: 80 m/min
- Z-axis: 20 m/min
- Drilling Unit - V18 High Speed 7500
- Configuration: 18-spindle vertical drill unit (CONFIG-V18)
- Spindle Speed: 1500 to 7500 rpm (variable speed controlled)
- Direction of Rotation: Right / Left
- Stroke Length (Z direction): 60 mm
- Drilling Depth: max. 38 mm / max. 55 mm with special blade
- Shank Diameter: 10 mm
- Total Drill Bit Length: 70 mm
- Maximum Drill Hole Diameter: 35 mm
- Spindle Spacing: 32 mm
- Machining Capabilities
- Vertical drilling from above
- Horizontal drilling into the front corner of the workpiece
- Adhesive application to drill holes from above (gluing unit included)
- Installation of drawer slide rails (Tandembox type, two sizes: 270 mm and 450 mm)
- Installation of cylindrical shelf brackets from above
Additional Equipment Included
- 2 additional crossbars for attaching machining units (NC-controlled Y and Z)
- Additional drilling rig for front angle (longitudinal) drill holes
- Gluing unit - adhesive dispensing into drill holes from above
- 2 pick-up and crimping devices for Tandembox drawer slide rails
- 4 lifting devices for drawer guides (pneumatic)
- 2 compression units for cylindrical shelf brackets
- 2 vibrating conveyors for cylindrical rack brackets
- Wireless barcode scanner and barcode control software
- Ethernet network interface with switch (8-fold 10/100 Mbit)
- Emergency circuit breaker and HOMAG group machine connection
- Mobile remote control with 10 m cable
- Operating and maintenance documentation included
Installation Requirements
- Required room height: approximately 3450 mm
- Working height (IGEL Buffer): 950 mm
- Floor: Concrete C25/30, minimum thickness 180 mm
Find more here - .ucymachines/
Contact us at - sales@ucymachines
Запитати про цю машину
Ваш запит надійде безпосередньо продавцю цієї машини.
