Type: SRM 125/4000 Parameters: 1250 mm, 4000 mm Manufacturer: Škoda Year of production / SO / GO: - / - / 2020 Description: Machine after complete overhaul. The design of this lathe enables both piece production and small series production, roughing and precise finishing work, turning of threads, cones, internal and external radii, turning of shaped rotary workpieces in CNC control. The drive box of the spindle drive has 3 mechanical stages by means of hydraulic cylinders with switchboards - valves controlled from PLC. A fixed 1: 3 gear ratio is provided in front of the drive box to increase the torque by means of a toothed belt. An emergency brake is located on the input shaft of the  ...

Maximum turning length 5000 mm turning diameter above bed (max) 1000 mm turning diameter above support (max) 710 mm workpiece weight between centers (max) 10 t spindle power 37 kW lathe length 8605 mm lathe width 1920 mm lathe weight 15.2 t Currently disconnected. ...

• додаткова інформація

turning diameter over bed: 1100 mm turning diameter over slide rest: 710 mm turning length: 6000 mm Torque: 35000 Nm Height of centres: 550 mm steady: 100-440 mm steady: 280-550 mm steady: 80-300 mm chip conveyor: workpiece weight: 10000 kg workpiece weight in steadies max.: 15000 kg total power requirement: 55 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1400 mm turning diameter over slide rest: 1000 mm turning length: 11280 mm faceplate: 1250 mm workpiece weight in steadies max.: 20000 kg steady: 395 mm steady: 620 mm workpiece weight: 16000 kg total power requirement: 40 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1000 mm turning diameter over slide rest: 710 mm turning length: 7000 mm max. workpiece weight between centres: 10000 kg spindle turning speed range: 1,8-400 U/min tailstock quill taper metric: 80/1:10 tailstock - quill dia: 170 mm tailstock - travel of quill: 200 mm Tailstock quill travel speed: 2150 mm/min main drive motor: 37 kW longitudinal feeds:: 0,125-48 mm/U face feeds: 0,4 der Längsvorschübe weight of the machine ca.: 17 t dimensions of the machine ca.: 11x1,9x2 m machine was mechanically and electrically overhauled in the last years. - taper turning function - 3 lynettes - misc. center points for tailstock - set of change gears The data for this ad wa ...

The SK 125 carousel is in good technical condition. Can be seen by appointment. Machine weight: 556000 kg Total machine input:: 686 kW Clamping plate diameter: 125 mm Max. workpiece height: 4000 mm Max. workpiece weight: 120 kg Clamping plate speed: 0.35-14 rpm The largest av. lathe. cross and side support.: 12500 mm Avg. clamping plates:: 8000 mm The greatest distance between clamps. plate and knife. side holder support :: 4200 mm Machine dimensions lxwxh: required area 20000x20000x12000 mm

Зробити SKODA тип СУА 125 PA побудований 1992 місце зберігання з місця розташування країна походження Чехія час доставки відразу вантажні бази з місця технічні деталі: поворот діаметр над ліжком 1500 mm діаметр повороту понад підтримки 1100 мм повороту довжина 13000 мм контролю SIEMENS 820 T Plan диск діапазон швидкості 0,9-315 r pmWork одиниця вага між порадами Макс. 14000 кг основний диск DC 42 кВт зага� ...

Порада висота 660 мм Довжина пікового 12000 мм Діаметр повороту 1320 мм Поворот Макс. за підтримки 950 мм Затискна Макс. 1200 Потужність 55 квт Крутний момент 35000 нм Обідок I 200-630 мм Заготовки вагою від 21 до Аксесуари: Конвеєр

Порада висота 660 мм Порада ширина 11000 мм Діаметр повороту 1320 мм Поворот Макс. за підтримки 950 мм Потужність 55 квт Крутний момент 35000 нм Затискна Макс. 1200 Заготовки вагою від 14 до Аксесуари: Рамка 200-630 мм

Description: clamping plate diameter: 8000 mm clamping plate diameter with extensions: 12500 mm max. workpiece weight: 200 tons clamping plate speed: 0.35 - 14 rpm smallest turning diameter: 5000 mm cross member without bases: 1040 mm transom with 3 pairs of bases: 5090 mm largest ,distance between the clamping plate and blase side bracket holder: 4200 mm vertical movement of the cross support: right: 3500 mm left: 2550 mm horizontal movement side carrier: 2000 mm vertical movement side carrier: 4000 mm area required: 20000 x 20000 x 12000 mm max. workpiece weight between centers: 200,000 kg, weight approx.: 550,000 kg, Approx. Onsite Dimension. (l x w x h): 20,000 x 12, ...