Used single-sided edge banding machine
Brand: Homag
Type: Profi KAL 330/ 9/A6/L
Year of manufacture: 2011
Feed speed Infinitely adjustable 18-25 m/min
Release agent spray unit top/bottom
- To reduce surface contamination.
Jointing unit KAL300/S2
- 2 motors, each 3 kW, Hz 9000 1/min
- Motor shaft Ø 30x68 mm, KN
- Electropneumatic control of both motors for joint milling.
- Automatic adjustment of the joint milling cutter to the center of
the workpiece.
Melting unit with granulate container
- Granulate container 12L
- Level control of the melting quantity
Lasertec activation unit standard
- The gluing unit is designed so that it can be used with either
EVA/PU adhesive or LaserTec.
- Manual conversion from LaserTec to PU/EVA
Magazine 1 roll
- For solid edges, strip goods, and roll goods
- Automatic strip separation via vacuum suction cup
- 1 edge feed
Pressure zone C
- 1 driven pre-press roller, diameter 150 mm
- 6 post-press rollers, diameter 70 mm
Automatic adjustment of pressure zone Optimat:
- For automatic adjustment of the pressure zone for different edge
thicknesses.
Application unit PU34 (interchangeable)
- Teflon-coated
- For processing PU adhesive, e.g. as granulate
HL84 chamfer/straight cutting unit, 0.22 kW
- For cutting excess material from the front and rear edges.
- 2 motors, each 0.22 kW, 200 Hz, 12,000 rpm
- Pneumatic adjustment for switching from chamfer to straight cutting.
Pneumatic adjustment of trimming motor:
- For electro-pneumatic adjustment of the trimming motors to 2
positions.
Pre-milling unit BF10 0.55 kW
- 2 motors one above the other, each with 0.55 kW, 200 Hz, 12,000
rpm.
Pneumatic adjustment of pre-milling unit:
- To 2 positions.
Multifräsaggregat MF21 0.55 kW automatic
- For chamfer milling of different edges up to a maximum edge
thickness of 3 mm and for radius milling
R=2 or R=3 with a combination tool
- For automatic changeover between chamfering/radius milling and for
moving sideways out of the working area
- 2 motors, each 0.55 kW, 200 Hz, W51214335 12,000 rpm with plug
connection.
Cutting agent spray unit at the top
Shape milling unit FK31/30- cycles
- For machining the front and rear edges of the workpiece
- 1 motor 0.75 kW, 200 Hz, 12000 rpm
- Program-controlled changeover to 3 different radii and 15°
chamfer
- Feed rate: max. 30 m/min
Free space for universal milling unit
MN21 automatic multi-blade
- For max. 5 different profiles
- Scanning from above, below, and from the side for chamfering or
rounding pre-milled PVC edges.
FA11 top/bottom finishing unit
- For finishing the longitudinal edge, consisting of:
- Glue joint scraper
- Cleaning agent application top/bottom
- Using 2 spray nozzles
- Buffing unit
- Height adjustment with top pressure
Note:
The specifications and descriptions are a copy of the order
confirmation at that time. Data are for information and are not
binding.
