DMG Gildemeister GMX 500 Багатоцільові токарні верстати з ЧПУ

turning diameter: 390 mm
turning length: 2250 mm
control: Sinumerik 840D
swing diameter: 610 mm
cross movement. (x-axis): 605 mm
longitudinal traverse (z-axis): 1.870 mm
y-axis: 210 mm
b-axis: 240 °
Axial travel (X2) / Longitudinal travel (Z2): 267/1.840 mm
Longitudinal travel (Z3): 1.840 mm
main spindle: -
clamping chuck diameter: 250-315-400 mm
bar material dia.: max 82 mm
spindle head: Ø 220H5
spindle bore: Ø 118 mm
Clamping tube inner diameter: 82 mm
Diameter in front bearing: 180 mm
Counter spindle: -
clamping chuck diameter: 250-315-400 mm
bar material dia.: 92 mm
spindle head: Ø 220H5
spindle bore: Ø 118 mm
Clamping tube inner diameter: 104 mm
Diameter in front bearing: 180 mm
Main spindle drives left and right: -
power requirement: 45/47 kW
speed area: 20 - 3.200 1/min
Buckling speed: 650 1/min
torque: 650/ 1.080 Nm
C-axis speed: 3.200 1/min
Torque C-axis: 660 1/min
Partial accuracy C-axis: 0,025 °
quality: Integrierter Spindelmotor
Slide for Turn-Drill-Mill-Unit: -
Slide for Tool turret: -
Slide counter spindle: -
Working spindle: -
tool taper: HSK-A63
spindle speed: 60 min-1
power: 10/15 kW
torque: 37 / 130 Nm
Indexing device B-axis: 1 °
Holding torque locked: 500 Nm
Coolant supply: -
tank capacity: 1.000 l
Band filter system: Ja
Number of coolant circuits: 3
tool magazine: -
Number of tool places: 80 St
Max. Tool size Ø x L: 80x350 Nebenpl besetzt mm
Max. Tool size Ø x L: 130x250 Nebenpl frei mm
tool taper: HSK-A63
Sep. terminal, back of the machine for tool input: -
Connection data: -
connecting power: 130 kVA
voltage: 400 V
frequency: 50 Hz
fuse: 200 A
total power requirement: kW
weight of the machine ca.: 22 t
dimensions of the machine ca.: 8,6 x 4,2 x 3,2 m
Equipment and Accessories
• CNC turning and milling center, designed for the complete machining of complex chuck and shaft parts up to 610 mm orbital diameter
• Z1-axis drive via linear motor
• Main and counter spindle with integrated ISM102 motor spindle
• Drives in digital servo technology from SIEMENS
• Siemens Sinumerik 840D control system
• Main spindle as integrated motor spindle with C-axis function
• Counter spindle as integrated motor spindle with C-axis function
• Turning, drilling and milling unit with Y-axis and integrated B-axis
• Kessler HSK-A63 tool spindle up to 12,000 rpm, 15 kW and 130 Nm
• Sauter tool turret at the bottom on second Z-slide with 12 positions
• Second control panel at the rear for data input for tool management
• Pick-up magazine for 3 long tools with standard tool interface, arranged above the main spindle
• Tool magazine 80-fold, two chains with 40 tools each
• Coolant unit consisting of:
Coolant tank approx. 1,000 l, feed pump 8 bar/60l/min, medium pressure 22 bar/30l/min, high pressure 80 bar/16l/min, belt filter system, cooling unit
Lifting tank with feed pump on the chip conveyor
• 1 chip conveyor lengthwise and crosswise, coolant capacity in chip conveyor approx. 450 l
• Complete housing with automatic doors
• 1 pc. Three-jaw power chuck, FORKARDT 3 FNC/315-82-Z11-F250 mounted on main spindle
• 1 pc. Three-jaw power chuck, FORKARDT 3 FNC/400-92-Z11-F315 mounted on counter spindle
• Oil mist extraction
• Machine prepared for bar feed supply
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.