Перевірений дилер
Детальніше
AMADA EUROPE 258 Машини для різання листового металу
вживанийПеревірений продавець
Запитати ціну
Безпосередньо продавцю
1 / 8
Технічні характеристики
· ID 170425550Машини для різання листового металу
- Стан
- вживаний
- Рік випуску
- 2001
- Місцезнаходження
- 9016 St. Gallen
Identifikation
ВиробникAMADA
МодельEUROPE 258
Номер позиції57707
Technik
Кількість1
Опис
CONTROLS
CNC controls FANUC GE SERIES 18I-P
DESIGN -CUTTING SYSTEM-
auto sheet repositioning: yes
WORKING RANGE -PUNCHING-
total force (nominal): 20 to
sheet thickness max. St37: 6 mm
turret/tool-changer: number of positions: 31
ELECTRICAL SPECIFICATIONS
mains voltage: 400 V
DIMENSIONS / WEIGHTS
space requirements -left/right-: 4890 mm
space requirements -front/back-: 3200 mm
total height: 2200 mm
total weight approx.: 11500 kg
Technical Data:
Year of manufacture: 2001
Punching force: 20 t
Number of simultaneously controlled axes: 3 (X, Y, C)
Pneumatic clamps: 2
Turret speed: 25 rpm
Number of tools: 31
Amada stations: 2 x 1 1/4 inch and 1 x 2 inch
Max. tool diameter: 88.9 mm
Minimum programmable increment: 0.01 mm
Sheet metal processing:
Max. sheet thickness (using ball-transfer elements): 6 mm
Max. sheet thickness (using brush tables): 3 mm
Max. workpiece weight per table: 100 kg
Travel ranges:
Without repositioning: 1,250 x 2,000 mm
With one repositioning: 1,250 x 4,000 mm
Accuracy and performance:
Punching accuracy: 0.1 mm
Positioning accuracy (repeatability): 0.07 mm
Feed speed (X and Y): 82 m/min
Travel length (X): 2,000 mm, (Y): 1,270 mm
Strokes per minute at 25.4 mm feed: X 320 / Y 250
Nibbling rate at 1 mm feed: X 920 / Y 920
Dimensions and connections:
Length x width x height: 4,890 x 3,200 x 2,200 mm
Total weight: 11,500 kg
Oil capacity: 160 l
Power supply: 400 V three-phase, 48 A, 50 Hz
Compressed air: 6 bar
Equipment:
Safety light barrier, brush strips, and ball-bearing table elements. Both processing modes are ready for immediate use.
Note: Tools are not included in the scope of delivery.
The machine has only been in operation for 563 hours.
CNC controls FANUC GE SERIES 18I-P
DESIGN -CUTTING SYSTEM-
auto sheet repositioning: yes
WORKING RANGE -PUNCHING-
total force (nominal): 20 to
sheet thickness max. St37: 6 mm
turret/tool-changer: number of positions: 31
ELECTRICAL SPECIFICATIONS
mains voltage: 400 V
DIMENSIONS / WEIGHTS
space requirements -left/right-: 4890 mm
space requirements -front/back-: 3200 mm
total height: 2200 mm
total weight approx.: 11500 kg
Technical Data:
Year of manufacture: 2001
Punching force: 20 t
Number of simultaneously controlled axes: 3 (X, Y, C)
Pneumatic clamps: 2
Turret speed: 25 rpm
Number of tools: 31
Amada stations: 2 x 1 1/4 inch and 1 x 2 inch
Max. tool diameter: 88.9 mm
Minimum programmable increment: 0.01 mm
Sheet metal processing:
Max. sheet thickness (using ball-transfer elements): 6 mm
Max. sheet thickness (using brush tables): 3 mm
Max. workpiece weight per table: 100 kg
Travel ranges:
Without repositioning: 1,250 x 2,000 mm
With one repositioning: 1,250 x 4,000 mm
Accuracy and performance:
Punching accuracy: 0.1 mm
Positioning accuracy (repeatability): 0.07 mm
Feed speed (X and Y): 82 m/min
Travel length (X): 2,000 mm, (Y): 1,270 mm
Strokes per minute at 25.4 mm feed: X 320 / Y 250
Nibbling rate at 1 mm feed: X 920 / Y 920
Dimensions and connections:
Length x width x height: 4,890 x 3,200 x 2,200 mm
Total weight: 11,500 kg
Oil capacity: 160 l
Power supply: 400 V three-phase, 48 A, 50 Hz
Compressed air: 6 bar
Equipment:
Safety light barrier, brush strips, and ball-bearing table elements. Both processing modes are ready for immediate use.
Note: Tools are not included in the scope of delivery.
The machine has only been in operation for 563 hours.
Запитати про цю машину
Ваш запит надійде безпосередньо продавцю цієї машини.
