We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 505)
used
Air-separator for hard material, drum diameter x width: 1,400 x 1,200 mm, feeder 1,000 x 1,500 mm with vibrator, blower with approximately 7,000 cbm flow, including steel-frame, machine is to separate heavy material from light one
used
capacity in kVA: 10 kVAinput voltage: 400 Voutput voltage: 200 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Drying centrifuge brand: viplat, length: 1.2 m, Ø: 0.5, grill: 3 mm, motor: 22 kw (30 hp) at 3,000 rpm and electrical panel.
used
waste oil collecting tank: . filling capacity: 1000 Liter : . with level indicator: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Centrifuge: 1,200x550 mm. Engine: 15 hp.
used
make: Ambra output: 75% mehr Zuzug des Mittel : alle Medien : Ölbinder Recyling-Pack The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Centrifuge Brand: Sion, model: 1400x700 mm Ø, motor: 55 Kw at 2960 rpm, year: 2009. No grill and no electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
used
Max. bale dimensions: 700x490x730mm, bale weight: 40-60kg, length: 710mm, width: 1000mm, height: 1920mm, weight: 550kg.
used
Centrifuge: 1.2x0.55 Ø, motor: 30 Kw (40 hp). With pneumatic scraper for top cleaning. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
used
Bale dimensions: 800x800mm, length: 8000mm, width: 6000mm, height: 5000mm.
used
Hydraulic shear (guillotine) 80 TN force. Measures cut width: 1.400 mm, height: 1.500 mm, motor: 60 hp. With electrical panel.
used
There are two shredders available, blade width: 3x 46mm, power: 30kW, machine 2 has a cracked casing and needs overhauling.
used
Hydraulic guillotine shear: 1.870x1.070 mm, brand: Gester, model: TN-100, engine: 30 hp, 100 TN force.
used
Motor power: 55kW, length: 14,900mm, width: 6800mm, height: 4000mm, operational hours counter: 30h.
used
IFE Electric Magnetic Strap Brand: IFE Length frame A.A.= 2300 mm Belt width : 800 mm This magnet has 2 magnetic blocks; nr1= main magnetic block, type electro Block : L= 950 x W=900 x H=650 mm Power requirement : 3,5 kW nr2= auxiliary magnet block , type permanent Block : L= 550 x W=620 x H=190 mm Drive: 2 kW slip-on gearbox Included rectifiers.
used
With documentation and controls.
used
Krupp Electric Magnetic Belt, heavy duty Block : L= 1650 x W=1200 x H=600 mm Power requirement block = 7.7 kW Power requirement drum motor = 5.5 kW Belt width : 1400 mm - A.A. 3200 mm Speed : 2.5 Mtr./sec. Included rectifiers (new) Weight approx. 7500 kg Stock 3 pieces
used
Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure.
used
Electric magnet block. Brand: Krupp. Block : L= 1650 x W=1200 x H=600 mm. Power requirement block = 7 kW, 35 Amp. Weight about 3.5 – 4 tons. Included rectifiers (new).
used
Min. output: 20t/h, wear plates: 13x Pos. 3, 14x Pos. 9, 20x 325x250mm, 28x 120x160mm, 18x 250x250mm, 23x 150x380mm, with blow bars, jaws, metering channel and 4x set screws with collar.
used
LKoreman Permanent Magnet Strap (unused) Block : L= 1200 x W=850 x H=300 mm Length frame A.A.= 1900 mm Belt width : 800 mm Drive slip-on gearbox 1.5 kW Speed 1.6 m/sec
used
With conveyor belt, blower, shredder, screw, drum and screen.
used
Permanent Magnet Block (unused) Brand: LKoreman Block : length 1200mm, width 850mm, height 320mm. Heavy Duty In stock : 2 piece(s)
used
Connected load: 15.5kW, weight: 6.8t.
used
Comec conveyor belt Brand: Comec A.A length = 10,000 mm Belt width: 500 mm Drive: Electric motor with gearbox A.A length = 5700 mm Belt width: 650 mm Drive: Electric motor with gearbox
used
Weight: 5.65t.
used
Mobile conveyor belt with screening machine Brand: FINLAY A.A length = 11,500 mm, Belt width: 650 mm. Dim. Screening machine: 2000 x 900 mm, 1 decker. Screen opening: 10 mm. Power requirement: 11 kW electric motor.
used
Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h.
used
Conveyor belt Brand: Kleemann A.A length = 9,000 mm, Belt width: 650 mm Speed: 1.3 m/sec. Drive: 7.5 kW motor with slip-on gearbox.
used
Pressing force: 785kN, opening width: 1100mm, bale weight: 475-750kg, bale dimensions: 1100x750mm, max. output: 30t/h, motor power: 45kW, operational hours counter: 59,550h, with documentation, an on-site inspection is possible, the machine is located in Slovakia.