plastics and rubber processing machines used for sale

used HERBOLD SMS 60/80-H5-2. Motor 75 kW Rotor blades: 5 Stator blades: 2 Rotor diameter: 600 mm Bu9dtai0he Rotor width 780 mm Inlet opening: 720x780 mm

used CONDUX CS 450/600-2A. Make CONDUX Type CS 450/600-2 Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

used Boy 22D. We have in our workshop and awaiting refurbishment this BOY 22D. The machine is a compact 22 tonne clamp machine with a very easy to use controller with the Dipronic system. These machines have stood the test of time and remain very popular as they are simple to use, cheap to repair and reliable. Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Category: Injection Moulding ID: 12646 M ...

used Boy 12A. Awaiting refurbishment at our works in Wellingborough, Northamptonshire is this high precision BOY 12A injection moulding machine. Fitted with the Procan controller. The 12A from BOY is one of the most common small moulding machines we see, it is extremely accurate while still maintaining versatility with tooling and familiar control setup. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Category: Injection Moulding ID: 12882 Manufacturer: BOY Model: 12A Datasheet (PDF): View Here Viewing: Not yet refurb ...

Key data: 160 °C

used Temperiergerät HB-Therm HB-160Z1 (2St.). Temperature control unit for tools - HB-Therm HB-160Z1 (2pcs.) Year of construction: 2010-2014 Description: Max. heating capacity - 160°C Heat Transfer Fluid – Water Heating capacity: 8 kW Cooling capacity: 30 kW Device has: - a vacuum pump - a vacuum chamber - a function to extract medium from the tool - The device can be integrated with the machine, unattended All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

used Boy 30M Procan. Awaiting refurbishment at our works in Wellingborough is this BOY 30M machine with Procan controller. These 30 tonne clamp machines from BOY are some of the smallest (footprint wise) available on the market. The 30M’s are a rarer variant of the market leading BOY 22. The key difference, aside from the uprated clamp force, is that the 30M’s have larger platens and a four tiebar design, allowing for greater versatility. Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as  ...

used Arburg 420C 1000-350. Now fully refurbished is this Arburg 420C 1000-350 injection moulding machine. This machine was manufactured in 2005 and is fitted with the ever-popular Selogica controller. It’s fitted with a 40mm diameter screw which gives a maximum shot weight (PS) 153g and single air blast. This machine comes with it’s own anti-vibration mounts and the original operators manual. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Pl ...

used Boy 22M VH. Now fully refurbished by the team at STV Machinery is this BOY 22M VH injection moulding machine. This machine was manufactured in 2002 with very low 12,187 run hours. It is fitted with a 24mm screw. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Category: Injection Moulding Latest Refurb ID: 12066 Manufacturer: BOY Model: 22MVH Datasheet (PDF): View Here Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2002 Clamp Force (t): 22 Screw Diameter (mm): 24 Max  ...

used URBAN AKS 6110 - TBA - SV 610 | AKS 6110 | SV 610 | welding cleaning line. URBAN Welding Cleaning Line Complete line, currently set to Rehau Urban AKS 6110/4-35/25 - Right stop - Year of construction 2001 - Welding dimension 3500 x 2500 - U-welding - C-welding Urban Cooling Belt 20/35 Urban SV 610 with turning station WT 660 - Flow direction right-left - Year of construction 2001 - with profile recognition -Tools: - ISBU - Radius gauge - 2 different groove knives at the bottom and top - Piercing knife for backstabbing wings - Various inner folding knives - Disc milling cutters - Drill groove cutters

used LEISTER Heißluftpistole Triac. LEISTER TRIAC heat gun, heat gun. Embossing on the device: K.LEISTER TYPE TRIAC CH-KÄGISWIL Motor 60W 220V ~6.6A Max 1460W 12820 Made in Switzerland GS S+ Used, very well preserved with signs of wear. Includes accessories, as pictured. Two-stage Cable length 3m Machine for processing and welding plastic geomembranes, shrinking plastics, films and other applications.

used UNION 120 mm. PET Sheet Extrusion Line Composed of: - Extruder 1 screw, brand: Union, 120 mm, motor: 185 KW (250 hp) double desasifier, year: 2002. - Continuous flow gear pump. - Self-cleaning hydraulic filter changer, brand: Erema, model: SW4/170 RTF. - New replacement spindle. - Head: 1400 mm, brand: EDI. - Calender: 1600 mm wide with 450x600-500 rollers. - 500 mm replacement cylinder - Silicone bath, year: 2017. -Winders. - Working width: 1200 mm. - Thicknesses: 0.2 to 1.2 - Production: 500 Kg/h. - Co-extruder 1 spindle, 80 mm, brand: PTI. -Dehumidifier, brand: Piovan, model: DP-620, year: 2022.

Key data: 1600 kN, 359 g/PS, 50 mm

used Arburg 470C 1600-800 dia. 50 mm. Machine in good condition, dry, clean, ready for production. The pump is quiet and the injection molding is precise. Everything works perfectly. With 2 core pullers and robot connector, with quality control program. Please see my other ads.

used DEMAG Ergotech 50-200 compact. Clamping force: 50 t Tool height: 210 mm Opening distance: 400 mm Platten dimensions: 520 x 520 mm Clearance between tie bars: 355 x 355 mm Screw diameter: 30 mm Specific injection pressure: 1990 bar Injection volume: 106 cm3 Shot weight: 94 g Dimensions(m) LxWxH: 3.7m x 1.4m x 1.8m Weight: 2900 kg Condition: working

used PRAT P-6. Grinder mill with blades Brand: Prat, model: P-6, cutting chamber: 800x600 mm, motor: 37 KW (50 hp), open rotor. With mechanical hopper opening. No electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

used EUROTECNO 250 mm Ø Eurotecno Hydraulic Filter Changer. Hydraulic filter changer: 250 mm Ø, brand: Eurotecno, engine: 4 KW (5.5 hp). With hydraulic unit with accumulator. GT-4753 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

used Bekum BM 406D. Machine equipped for approx. 11,000 bottles per hour in 250 ml. Built in 2006. Extruder 100/24D. 6-fold head 70 mm stitch. With shapes. 2 bottles are produced in each cavity. 460V 60 Hz. Very good condition

used MAPRE E 2.66.100. Extruder 2 screws : 100 mm Ø 15 L/D Brand: Mapre Model: E 2.66.100 Series No. 155 Engine: 30 KW (40 hp) Parallel spindles forced feeder CM 80 headcutter system with geared motor type F 30 AG 19 123752, no. 1910072-249, brand PIV Antrieb W. Reiner K.G. 2.2 KW (3 hp) Electrical control panel equipped with electronic frequency inverter and electrical temperature control panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

used CONDUX CS 450/600-2A. Make CONDUX Type CS 450/600-2 Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

Key data: 35 kN

used Sumitomo SD35E. SUMITOMO SD35E 35Ton Injection Molding Machine The high-speed injection molding machine for all challenges Manufacturer: Sumitomo Model No.: SD35E 35t Plastic Injection Molding Machine Clamping force: 35 t Power: AC 200V, 30V, 125A Inverter: 21A Heating power: 4.8 KW Weight of the injection compound: With the built-in extrusion screw approx. 100g Included: DRD III Yushkin high-performance robot Year of manufacture: 04/2000 Condition: At the time of shutdown, the machine was in perfect condition while CD production was running There are 2 identical machines available, the price is per machine The machine is currently still tied up in our customer's factory in Bielefeld and will be handed over to our customer due to a restructuring of the production processes. We sell the assets on behalf of our customers. The offer prices are to be understood as n ...

used forms 10 + 20 ltr. 10 and 20 ltr for sale. Closure 61 mm

Key data: 305 mm, 550 mm

used Trusioma 22. available 22" Mill Decription attached!

Key data: 190 mm, 450 mm

used Schwabenthan Lab Mill. available Lab Mill! Description attached !

Key data: 340 mm, 700 mm

used Macchine Gomma 27. available 27" Mill Description Attached!

Key data: 203 liter, 142 liter, 1

used Harburg Freudenberger GK190-E. available GK-190-E as option available Gear Box, Set of Spare Rotors, DC Motor

used ARBURG 320 M 500 - 90. 1996 Arburg Allrounder 320 M 500 - 90, 50 t Clamping force 50 t Screw 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 71 cmm Control Multronica Core pullers - no Hotrunner zones - no Weight 2360 kg, L x W: 4100 mm x 1200 mm year of made 1996 stock number 00660 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)

used ARBURG 320 S 500 - 150. 2001 Arburg Allrounder Selecta 320 S 500 - 150, 50 t Clamping force 50 t Screw 30 mm Mold height min 225 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 78 ccm Control Selogica Core pullers - 1 Hotrunner zones - 9 Weight 2250 kg, L x W: 3700 mm x 1100 mm year of made 2001 stock num 00659 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)

used ARBURG 320 M 500 - 210. 1998 Arburg Allrounder 320 M 500 - 210, 50 t Clamping force 50 t Screw 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 101 ccm Control Multronica Core pullers - no Hotrunner zones - no Weight 2610 kg, L x W: 4100 mm x 1200 mm year of made 1998 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)

used ARBURG 420 M 1000 - 250. Arburg 420 M 1000 - 250, 100 t (1996) Clamping force 100 t Screw 40 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 188 ccm Control Multronica Core pullers - 1 Hotrunner zones - no Weight 3230 kg, L x W 4100 x 1270 mm year of made 1996 stock number 00655 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)

used ARBURG 420M 1000-250. 1997 Arburg 420M 1000-250, 100 t Clamping force 100 ton Screw 30 mm Mold height min 250 mm distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 106 ccm Weight 3230 kg, L x W 4100x1270 mm control Multronica Core pullers - 2 Hotrunner zones - no year of made 1997 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)

used ARBURG 420 C 1000 - 350. Injection Molding Machine Arburg Allrounder CENTEX 420 C 1000 - 350, 100 t (year 2003) stock number 00653 Clamping force 100 t Screw 45 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 230 ccm Control Selogica Core pullers - 2 Hotrunner zones - 12 Weight 3430 kg, L x W 4250 x 1640 mm year of made 2003 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)

used Kampf KS-104. Slitter rewinder for foil, paper, foiling and laminates. 7 my -200 my Max. material width = 1250 mm Speed max. mech = 350 m/min, Rewinder max. = 600 mm Min. working width = 25 mm, sleeve 76 mm, Max. working width = 1250 mm, sleeve 76 mm,, Unwinder (shaftless) diameter max. = 1000 mm Sleeve = 70-76/ 150 -152 mm, Cutting system = paper cutting, Side edge control , 16 knives included,

Key data: 3200 kN

used Arburg 1500T 3200-1300 e². Arburg 1500T 3200-1300 e² / Hybrid machine with one turntable Year of construction: 2011 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Spray pressure: 2000 bar Dosing volume: 664 ccm Clamping unit: Clamping force: 320 t Tie bar spacing: 0x0 mm Size of clamping plates: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 3 Hot runner control x 13 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter Very precise turntable, driven by a servo motor, controlled by an inverter Turntable diameter: 1500 mm Horizontal injection unit with automatic ...

Key data: 2200 kN

used Arburg 570S 2200-290/100/100. Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot Interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Machine with two c ...

Key data: 2200 kN

used Arburg 570S 2200-290/100/100. Arburg 570S 2200-290/100/100 / Production line with the Wittmann W843 robot / Operating hours: 23,897 h in automatic mode Year of construction: 2014 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 23,897 h in automatic mode Euromap 67 Robot Interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Machine with two c ...

Key data: 2000 kN

used Arburg 520C 2000-350/150. Arburg 520C 2000-350/150 / Production line with the Wittmann W731 robot Year of construction: 2008 Injection unit: Screw diameter: 40 mm Spray weight: 166 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 520x520 mm Size of clamping plates: 728x728 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2-Component Injection Molding Machine Very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve x 3 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the vertical injection unit – precise injection Parallel Movements Screw diameter in vertical injection unit: ⌀25 mm - 49 g/hp Robot Wittmann W731 Year of construction: ...

Key data: 2000 kN

used Arburg 570E 2000-800. Arburg 570E 2000-800 with the Sepro Industrial Robot 65 sprue picker / Electric machine / Operating hours: approx. 3,500 h in automatic mode Year of construction: 2021 Injection unit: Screw diameter: 50 mm Spray weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Perfect technical condition, machine like new Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 3,500 h in automatic mode Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 2 Air core on solid plate side x 2 Pneumatic nozzle closing valve x 2 Injection unit hardened - Bimetal Central lubrication Parallel Mov ...

Key data: 2000 kN

used Arburg 570C 2000-150/60/ 2K. Arburg 570C 2000-150/60 / 2K machine Year of construction: 2003 Injection unit: Screw diameter: 35 mm Injection weight: 97 g Spray pressure: 1620 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 200 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot Interface Hydraulic Core Pull x 2 Hot runner control x 12 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 18 mm Machine with 1 cylinder/battery with compressed nitrogen (extra charge for fast working) It is possible to install a turntable in the machine - at an additional cost Metrics: Weight: 8000 kg Length/width/height: 0x0x0 m Drive: Pumps/motor: 30 kW Heating capacity: 9.4 + 3.2 kW Total power: 42.6 kW All  ...

Key data: 2000 kN

used Arburg 570H 2000-2100. Arburg 570H 2000-2100 with the Sepro Industrial Robot SDR 22S robot / Hybrid machine / Operating hours: approx. 29,000 h in automatic mode Year of construction: 2010 Injection unit: Screw diameter: 70 mm Injection weight: 984 g Spray pressure: 2000 bar Dosing volume: 1078 ccm Clamping unit : Clamping force: 200 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 29,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Air Core Pull x 7 Hot runner control x 15 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy ...

Key data: 1500 kN

used Arburg 470C 1500-800. Arburg 470C 1500-800 with the Sepro Industrial Robot 65 sprue picker Year of construction: 2021 Injection unit: Screw diameter: 50 mm Spray weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Perfect technical condition, machine like new Operating hours: 7,788 h in automatic mode Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Pneumatic Core Pull x 2 Pneumatic nozzle closing valve x 2 Injection unit hardened - Bimetal Sprue Picker Sepro Industrial Robot 65 Year of construction: 2021 Purchase of the sprue picker at an additional cost It is possible to buy the machine with another robot It is possible  ...

Key data: 1500 kN

used Arburg 470C 1500-400. Arburg 470C 1500-400 with the Wittmann W721 robot Year of construction: 12.2006 Injection unit: Screw diameter: 40 mm Spray weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - Bimetal Built-in conveyor belt and sorting flap Robot Wittmann W721 Year of construction: 2006 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Metrics: Weight: 4900 ...