We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
б/у
Гидравлический пресс EXNER EXSBR 200 8/1987 Серийный номер 10042 Давление 200 т Стол 1800 x 800 mm Потребляемая мощность 65 кВт Безопасное расстояние 195 мм Оверпутешествие 52 мм Время работы 120 мс Вес около 23 т
б/у
гидравлический четырехкоордный пресс Exner, тип H4 SP 450, Y.O.M. 1983, давление 450 к., сторона. Проходит 475 мм. Высота установки 600 мм, площадь стола 1100 х 850 мм, ударная площадь 300 мм, удар 200 мм. Размеры 3100 мм х 2100 мм, глубина 1 980 мм. Вес 13 к. ]
б/у
pressure:150 t distance between columns:300 mm stroke:180 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:570x180 / 300x410 mm table height over floor:875 mm side window:180 mm ram surface:180 mm speed down:250 mm/s speed up:160 mm/s working speed:6 - 12 mm/s oil volume:250 l power requirement:11,0 kW weight:2,4 t dimensions (WxDxH):1,3 x 1,3 x 2,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 foundation pit:nicht erforderlich
б/у
pressure:40 t distance between columns:495 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:490 x 400 mm hole in the table:50 mm table height over floor:950 mm side window:155 mm ram surface:150 mm speed down:480 mm/s speed up:480 mm/s working speed:20 mm/s oil volume:115 l power requirement:7,5 kW weight:2,2 t dimensions (WxDxH):1,35 x 1,1 x 2,2 m depth stop:mechanisch foundation pit:nicht erforderlich
б/у
pressure:40 t distance between columns:500 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:480 x 400 mm hole in the table:50 mm table height over floor:950 mm side window:150 mm ram surface:150 mm speed down:480 mm/s speed up:480 mm/s working speed:20 mm/s oil volume:160 l power requirement:7,5 kW weight:2,6 t dimensions (WxDxH):1,1 x 1,4 x 2,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick depth stop:mechanical foundation pit:not necessary
б/у
press ram:: ram head width: 2.100 mm depth: 840 mm stroke: 350 mm Control: EXNER Guide way length: 750 mm nominal pressure: 2x 400 kN return capacity: 2x 150 kN ram stroke speed - under load: 100%: ca. 0 - 10 mm/s ram stroke speed: ca. 0 - 20 mm/s T-slot - width: 18 mm T-slot - distance: 150 mm Installation Space:: dayligth: 550 mm table surface area: 1.600 x 840 mm T-slot - width: 18 mm T-slot - distance: 90 mm dist. between pillars (left to right): 1.700 mm dist. between pillars (front to rear): 600 mm table height over floor: 1.300 mm total power requirement: 11 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 2,5 x 2,0 x 3,7 m Hydraulic tool testing press EXNER - PG 80 - very good condition - approx. 300 operating hours - Electronic roller feed device EV 22 AK incl. Bandwidth: max. 220 mm Band cross section: max. 200 mm² Feed length: 0.1 x 19,999 mm Speed: ...
б/у
Давление: 200 т Расстояние между колоннами: - Ход в мм: - мм Площадь поверхности стола: 2000 x 800 мм Общая потребляемая мощность: кВт Вес машины ок.: 31 т Габариты машины ок.: м Мощность привода 55 / 4 кВт Ход слежения 28 мм Безопасное расстояние 155 мм Время слежения за ходом 97 мс Заправка маслом 1200 литров
б/у
pressure: 125 t distance between columns: 1500 / 460 mm stroke: 400 mm total power requirement: 15 kW weight of the machine ca.: 10 t dayligth: 800 mm table surface area: 1900x870 mm ram surface: 1900x870 mm working feed: 0-10 mm/sec return speed: 0-20 mm/sec dimensions: BxTxH 2400x1500x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
давление: 20 т горловина: 185 мм ход поршня: 100 мм Площадь поверхности стола: 380 x 350 мм дневной режим: 250 мм высота стола над полом: 840 мм общая потребляемая мощность: 4 кВт Вес машины ок.: 1,3 т
б/у
давление: 60 т горловина: 330 мм ход: 500 мм Площадь поверхности стола: 640x640 мм Поверхность рамы: 120 мм Высота стола: 850 мм Инструментальное отверстие в раме: 50 мм Вес машины ca.: 7 т
б/у
pressure: 200 t passage width: NA mm stroke: 180 mm table length: 690 mm table width: 530 mm distance between columns: 420 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m Hydr. 4-Pillar Press for Embossing/Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.