saws used for sale

Inv. Num. : 7509 Type: DG 79/31 M Producer: Elumatec Created: 2009 Parameters: Maximum sawing speed: 2800 1/min Cutting length: 520 mm Wheel diameter: 380 mm Motor power: 3 kW

Machine saw blade, 6 piecesPAGUS1x HSS 400 x 30 x 1.5 mm14 teeth per inch5x HSS 300 / 400 x 30 x 1.5 mm10 teeth per inchNew ! dimensions (single blade): 300 / 400 x 30 x 1.5 mmDimensions ( packaging ): 405 x 35 x 22 mm

Inv. Num. : 4854 Type: TS 161/21 Producer: Elumatec Created: 2004 Parameters: Maximum saw speed: 3200 1/min Saw blade diameter: 280 mm Electrical connection: 230/400 V. 3~. 50 Hz Power output: 1.05 kW Machine dimensions: 650x750x1300 mm Machine weight:: 130 kg Accessories: Roller conveyor Two saws A Lesson Slices

Circular knife, 25 piecesHERBORTType 0294Diameter: Ø 100 mmbore: Ø 40 mmMaterial thickness: 1.0 mmNew !Dimensions ( single sheet ): 100 x 100 x 1.0 mmDimensions ( packaging ): 115 x 115 x 42 mm

Inv. Num. : 5876 Type: ARG 640 DC SAF Producer: PILOUS Created: 2016 Parameters: Minimum belt feed speed: 20 m/min Maximum belt feed speed: 90 m/min Cutting area: 640 mm Saw blade size: 5770x41x1.3 mm Total power requirement: 8.8 kW Length: 3800 mm Width: 2050 mm Height: 2500 mm Weight: 4200 kg Equipment: 2x roller conveyor G1000 (length 3000 mm)

Circular saw shaftPAGUSshaft diameter: Ø 20 mmdiameter V-belt pulley: Ø 68 mmNumber of grooves: 2groove width: 12 mmbase plate: 220 x 130 x 8 mmhole spacing: 90 / 160 mm4x bore: Ø 12,5 mmused, tested !; Dimensions: 430 x 130 x 70 mm

Inv. Num. : 7367 Type: 335 GA Producer: MEBA Created: 2012 Parameters: Minimum belt feed speed: 15 m/min Maximum belt feed speed: 150 m/min Saw blade dimensions: 4400 x 34 x 1.1 mm Cutting area: 335 mm Length: 5350 mm Width: 2300 mm Height: 2000 mm Weight: 2020 kg

Ripper tooth chain, saw chain, 4 piecesWMW, VEREINIGTE WERKZEUG-FABRIKEN GERINGSWALDE ( VWF )15 x 2 x 33Division: 15 mmNumber of drive links: 33Drive link width: 2.0 mmCutting width: approx. 9 mmNew !Dimensions ( packaging ): 300 x 130 x 70 mm

Inv. Num. : 7318 Type: PSU 450 Producer: Behringer Created: 2006 Parameters: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare Disc

Planed tooth chain, saw chain, 4 piecesWMW, VEREINIGTE WERKZEUG-FABRIKEN GERINGSWALDE ( VWF )10.25 x 1.6 x 68 pitch: 10.25 mmNumber of drive links: 68drive link width: 1.6 mmcutting width: approx. 9 mmNew !Dimensions ( packaging ): 300 x 130 x 70 mm

Inv. Num. : 7179 Type: BS 740 RS3 Producer: FELDER Created: 2021 Parameters: Machine width: 860 mm Machine length: 1100 mm Machine weight: 500 kg Cutting height: 450 mm Saw blade length: 5365 mm Equipment: Automatic workpiece feeding

Ripper tooth chain, saw chain, 4 piecesWMW, VEREINIGTE WERKZEUG-FABRIKEN GERINGSWALDE ( VWF )12 x 1.6 x 55Pitch: 12 mmNumber of drive members: 55Drive link width: 1.6 mmcutting width: approx. 9 mmNew !Dimensions ( packaging ): 300 x 70 x 70 mm

Inv. Num. : 6503 Type: ALU-U12 Producer: KASTO Generated: 2015 Parameters: Maximum sawing speed: 2800 1/min Spindle power: 1.5 kW Machine dimensions: 650 x 800 x 1300 mm Machine weight: 150 kg Equipment: Saw blade

Circular saw shaftPAGUSshaft diameter Ø 25 mmwith adapter Ø 30 mmdisc diameter Ø 84 mmDimensions: 350 x 135 x 85 mm

Key data: 380 mm

Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Automatic positioning of the sawing unit via E 255 control system Cutting range at 90°: 195 x 120 mm Cutting range at 45°: 135 x 120 mm Minimum Quantity Spraying Device Pneumatic material clamps Mitre cuts possible on both sides 2-hand operation

Saw blade for metal circular saw, segment saw bladeWMW, HOHENSTEIN54060Ø 400 mm96 teethwidth: 4.0 mm bore: 50 mmbolt circle of each 4 driver holes: 80 / 85 mm spare part e.g. for Hohenstein RBT400 !suitable gearbox G84 !used, tested !Dimensions: 420 x 420 x 10 mm,

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. pawl width: 300 mm Max. notch height: 185 mm Max. jack depth: 185 mm Material stop can be swivelled with locking points and digital display Notch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication

Circular saw shaftpulleys Ø 79 mmØ 63 mmØ 48 mmDimensions: 30x20x28 cmweight 22kg

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width:At 90° processing of profiles up to 300 mmTip mitres up to 30° / profile height max. 280 mmNotching depth:at 90° horizontally up to 185 mm / at 90° vertical up to 230 mmMaterial stop:swivel 30° - 90° - 45° Swivel material stop with latching points and digital display Latch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication

Circular saw blade, segmental saw blade, carbideLEUCO180x6.0/5,0x65209010-802584452135179Ø 180 mm40 teethWidth of teeth: 6.0 mm saw blade thickness: 5.0 mmBore: Ø 65 mmbolt circle: Ø 90 mmsuitable motor: EM578 !used, tested !Dimensions: 180 x 180 x 10 mm,

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

Machine saw blade, 3 piecesRIX700 x 55 x 2.5 mm2x KOMBIDUR positive4 / 6 tpi1x HSS6 tpisuitable in KASTO metal sawsNew !, among others! Dimensions ( single sheet ): 745 x 55 x 2.5 mmDimensions ( packaging ): 750 x 35 x 35mm,

CARTER CNC 4.2 M double mitre saw built in 2021 is ideal for high-volume production that requires precise cutting of workpieces with a maximum length of 4200 mm. The machining of workpieces at 90° and 45° is performed with the utmost precision and accuracy using high-quality discs driven by powerful electric motors. The machine has been used very little to date – it has only been in operation for 1 hour a day. Technical specifications of the CARTER CNC 4.2 M sawing machine - controller: SIEMENS - machinable materials: aluminium, PVC - maximum workpiece length: 4200 mm (possibility to cut oversized workpieces with a length of 7 m) - cutting angle: 45°; 90° - HMI panel: SIEMENS SMART LINE TOUCH - power supply: 380 V; 50 Hz - dimensions of the machine (L x W x H): 4600 x 900 x 1600 mm

Circular saw blade, metal circular saw blade, cold circular saw blade, 2 piecesPAGUSHSS DM05400 x 3.5 x 50164376Ø 360 mm80 teethwidth of teeth: 10.0 mm saw blade thickness: 3.5 mmbore: Ø 50 mmbolt circle: Ø 80 / 85 mmused, tested !Dimensions ( packaging ): 400 x 400 x 20 mm,

UZAY MAKINA UMSY 1300 band saw was built in Turkey in 2001. The machine, equipped with a high-quality saw blade with hydraulic blade tension and the possibility of adjusting the cutting height via a control panel, is designed for the precise cutting of workpieces made of even the hardest materials, such as titanium. The specially designed double-jaw vise system significantly increases the capacity of the machining process, thanks to the possibility of positioning the workpiece at the front and at the back of the UZAY MAKINA UMSY 1300-1600 SP machine. The UZAY MAKINA 1300 x 1600 double-column sawing machine weighs approximately 8200 kg. Technical data of the UZAY MAKINA UMSY 1300 band sawing machine - saw blade dimensions (L x W x H): 12000 x 67 x 1.6 mm - maximum cutting speed: 100 m/min - minimum cutting speed: 20 m/min - maximum cut at 90° (circle): 1300 mm - maximum cut at ...

Saw blade metalSELECTLength: 30 mDimensions: 12 x 0.65 mm

WE OFFER AN VERY NICE DOALL HEAVY SAW - NC FULLY AUTOMATIC WITH COMPLETE CONWENYOR RAILS AND SPARES BLADES ON STOCK 13X NEW BLADES INCLUDED CUTTING CAPACITY: 100 -700mm 100W x 100H - 800W x 700H mm BLADE SIZE: 8250 x 67 X 1,6 mm SPEED: 16-85mm TENSION: BY HYDRAULIC COOLANT: 230L FEEDING LENNGHT : 400mm SINGLE TIME OR MULTIPLE TIMES DIMENSIONS OF MACHINE: 3910 W x 2330H x 2350L WEIGHT: 7000 KG FOR OUR CUSTOMERS WE ORGANIZE TRANSPORT WORLD WIDE MAKING EXPORT DOCUMENTS

Dimensions: 30x10x8 cm

WE OFFER AN EXCELLENT CONDITION FULLY AUTOMATIC BANDSAW INCLUDIN DOCUMENTATION FOR CUSTOMER WE CAN ORGANIZE TRANSPORT AS WELL WE CAN ORDER FOR CUSTOMER RESERVE BLADES.

Dimensions: 18 x 4.5 x 4.5 cm