window production machines used for sale

Technical details: - Spindle diameter: 400 mm - Max. diameter of milling tool: - Mechanical spindle height adjustment with analogue scale - Foldable rolling table - Rolling table travel max. 1,430 mm - Table length: 800 mm - Table width: 385 mm - with eccentric pressure apparatus - 1 x extraction nozzle milling machine, diameter 160 mm - 1 x suction nozzle saw, diameter 80 mm - Max. diameter of saw blade: 400 mm - Saw blade shaft diameter: 30 mm - 1 x saw blade QW 2020 x 400 x30 mounted - 1 x splitting wedge mounted - 2 x engine brake installed - With aliminium length stop (length 3,000 mm) Engine data milling unit: - Voltage: 400 V - Current: 15 A - Frequency: 50 Hz - Power: 7.5 kW - Speed: 2,850 rpm Engine data sawing unit: - Voltage: 400 V - Current: 4.8 A - Frequency: 50 Hz - Power: 2.2 kW - Speed: 2,760 rpm Dimensions (LxWxH): 2,000 x 1,530 x 1,61 ...

turning speeds: - U/minfrequency: - Hzoutput: - kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double pin cutting and slotting machine model ZA 2 T Longitudinal saw 2 strong milling motors large sliding slide long milling stop LAS pneumatic tool clamp

table length: .. mmtable width: . mmtable load: . ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single-roll grinding machine/flattender model LZ 2 year of manufacture 95

height of profile: 60 mm: 60 weight of the machine ca.: 188 kgdimensions of the machine ca.: 0,85 x 0,45 x 1,25 mfoot switch: - Fabr.-No.: 292539- pneumatic clamping headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Window tool set complete For wood thickness IV 78 slotted discs and milling heads as well as additional tools Also additive WOOD ALU

saw blade diameter: 370 mmcutting range round: 115 mmcutting range square: 105 mmcutting length min.: 730 mmcutting range flat: 70 x 240 mmcutting lenght max.: 4000 mmsaw blade turning speeds: 1250 / 2500 U/mintable rotating: 180 °stroke: 120 mmfeed stepless: 0 - 500 mm/mincoolant: capacity 45 degrees: square: 95 mmcapacity 45 degrees: flat: 50 x 200 mmcutting speed: 1250 / 2500 m/minweight of the machine ca.: 1,1 tdimensions of the machine ca.: 5,00 x 1,30 x 2,00 m- Fabr. - No.: 28232 und 28233- pneunatic clamping head- coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

complete window tool set IV 68 with additional milling head for left centre rebate and bank connection as well as many spare knives

Length: 5200 mmWidth: 1200 mmHeight: 900 - 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Cross-cut saws - saw blade diameter: mm 250 Milling unit - shank diameter: mm 35 Height of trunnion cutting shaft: mm 150 Manual guide carriage with 2 tilting guide rails

Number of motors: 2 Stück0: 2800 mmControl: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand: Götzinger Type:

Working width: 3500 mmWorking height: 2250 mmNumber of cylinders: 5 St.control: Siemens S7-1200 #2701 Hess Quickstep frame press--------------------------------------Technical data summary(please inquire about any additional accessories included)--------------------------------------Generally-------------- ------------------------Working width: 3500 mmWorking height: 2250 mmTotal power requirement: 3 kWInstallation dimensions: 4500x980x2610 mmLoading dimensions: 4500 x 980 x 2610 mmMachine weight, approx.: 2000 kgCharacteristics:--------------------------------------> hydraulic: yes> Number of vertical press cylinders: 3> Number of horizontal press cylinders: 2> Vertical adjustment type: electric (long-stroke cylinder)> Horizontal adjustment type: electrical> 1 medium pressure bar> Printing plate depth 100mm width 140mm> 3 pcs. pendulum pressure plates> 1 piece small parts allowanceOther ...

Brand: Eder & Müller Type: KT tilting table Year of construction: Description: Pneumatic swivel from horizontal to vertical position. Support grid extendable from 1500 - 2300 width and 1000 - 1600 height. Grooved rubber pad (original underneath or foam pads) Dimensions: Table length: 1500 - 2300 Table level: 920 mm Table width: 1000 - 1600 Weight: 90 KG

Clamp length: , mmClamp width: , mm: , NmRU-LH Painting AssistancePainting assistance for the simultaneous painting of sash and glazing ledges. A clamp has to be positioned in each corner of the already made frame. The operation is started by using a foot valve. For different thickness of ledges the clamping device is height- and depth adjustable. The positioning is diagonally and the clamps stick out of the wood about 25 mm. Now the frame can be pressed into the sash and is fixed. For the painting the frame is positioned now about 10 mm outside in front of the sash. After drying, the frame is pressed into the sash, it will be removed before the glazing. The clamps can be removed by hand for the further processing. For different thickness of ledges the clamping-device is height- and depth adjustable. The height is adjustable from 700 – 1200 mm.Advantages:Quick assemblyNo jam ...

Wing stop center Make: ITS Fenstertechnik Type FAZ 2800 No. 526 Built in 1991 With screw feeder Powasert Type ADS-UF Table support with brush strip Table length 2800 mm Table width 1400 mm Table height 950 mm Table can be tilted by approx. 15° Total length 2950 mm Width 2000 mm Height 1000 mm + Screw feeder

Dimensions (L,W): - mmWeight: - kgadjustable height (yes/no): ja 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Winkelanlage Weinig including tools Type: UC 10/6 Year of construction: 1994 Cross wood processing 7 x stroke (7 tools on top of each other at IV 68) Longitudinal machining 3 shafts: 2 pieces with 3 x stroke and 1 piece with 2 x stroke Screen control for individual programs such as individual and series production Swivel stop arm for inclined window processing Tool: IV 68 Leitz (Dufix) with extension kit for sash 78 mm / frame IV 68# IV 68 with rung profile (carnish arch on the glass fold) IV 78 Zuani (for weather legs and rain rail) with extension kit for IV 90 (Zuani) with extension set for wood-aluminium windows (Aluminum shell as glass holder outside of Zuani) Weight 4700 kg

Number of machnines: - Loading meters, approx.: - Total weight, approx.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I sell the complete window construction profiling line: 1 pcs. 5-spindle four-side planer with saw Weinig Unimat 23EL - without grinding machines HESS - other replacement machine by appointment 2 tap cutting and slotting system Weinig Unitec 10. 2 pcs. profile automatic converter center Weinig Univar 10. - Set of complete Weinig automation feeders and foerderer. - without a central computer - must be added and programmed. Year of construction 1997. Milling heads OERTLI. Available the same. Immediately dismantled with original pallets. Price together only 48,000 euros. Condition very good !

Motor output: , kWautomatic: , Table dimensions: , mm! Please notice the VIDEO of this unit ! For window producers we recommend a spinde with 40 mm diameter and 160 mm usable length, Tools should have inside diameter of 110 to 120 mm Attached the description with options as pdf-file. Price list on request! For window production the manufacturer recommends following options of price list: Art.-Nr.bo1000 base unit Art.-Nr.bo1050 protection Art.-Nr.bk0180 arc marker Art.-Nr.gt0250 glazing bead construction 1 lengthenning : bo1720 ot bo2510. (technical details according to manufacturer - without guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Hydraulic frame press for doors and windows Working width mm: 3000 Working height mm: 1800 Control panel Hydraulic unit KW: 2.2

max. workpiece length: 5150 mmprofile spindle: 1 Stückmain drive: 16 kWControl: Beckhoff CNCNumber of axles: 5 St.CNC machining center Masterwood Project 385 WL, NEUMASCHINEThe all-rounder forWindows, round arches and doorsinteriorPost and beam5-axis machining of all kindsDetailed description in the adjacent PDF file!HIGHLIGHTS:- Working range: X = 5150 mm, Y = 1500 mm, Z = 200 mm- 1 pc. 5-axis high-performance spindle, 16 kW,double bearing with HSK 63 F recording- fixed drill head with 19 spindleswith 7 individually retrievable vertical spindles X-directionwith 6 individually retrievable vertical spindles Y-directionwith 2 double horizontal spindles X-directionand 1 double horizontal boring spindle in the Y directionSaw unit integrated in drill head- Carousel tool changer with 22 places and 102 mm grid spacing- Carousel tool changer with 16 places and 102 mm grid spacing- linear 4-fold ...

Gebr. Slotting tool / window milling tool Extensive milling tool as shown mainly from STEHLE for 40mm spindle Drawings are partly available from various milling cutters To self-collectors.

Number of boring spindles: 3 St.Number of tools: 1.3/4.1. St.Spindle diameter: 50,40 mmSpindle length: 120,320,125 mmweight: 2500 kgloading dimensions L x W x H: 3800x1400x2000 mmtable length: 3470 mmWeinig Univar 6 PIn order to sell----------------------Operating voltage: 380 volts, 50 periods.For milling around windows, doors and similar with uneven edgesProfiles.Arrangement of the aggregates:1. Synchronous spindle on the right, pneumatically clocked.2. Profiling spindle on the right3. Fitting spindleProfiling spindle suitable for holding several tools one on top of the other.Spindle movement pneumatic.The 1 spindle works in synchronization for tear-free milling. RespectivelyThis spindle plunges the last 100 mm of a frame end with theInsert the appropriate tool into the wood to prevent tearing at the frame cornersavoid.Machine stands, tables, stops:Machine body made of heavy, torsion-f ...

KÖLLE Z40 YOC 1983 Rated Current: 20A Milling machine: Motor power: 7.5 kW Speed: 4,000 rpm. 40 mm spindle Clamping height: approx. 190 mm Height adjustment via handwheel (travel: 80 mm) Saw: Motor power: 2.2 kW Speed: 3,000 rpm. 30 mm spindle max. saw blade diameter: 400 mm max. cutting height: 120 mm Sliding carriage eccentric. Workpiece clamping Length fence: 290cm can be swivelled on both sides (up to 45°) Suction connection: 160 + 80 mm Engine Brake Weight: approx. 700 kg Stop ruler available. Machine dimensions with folded table as shown: L: 200 cm W: 130 cm H: 161 cm Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

Manual hand unit: Nein J/NAutomatic for single pieces: Ja J/NAutomatic for frames: Nein J/NClip set 351 on the loose item------------------------------------Manufacturer description:- Base frame in stable welded construction- Clip container as tipping conveyor with separation and feeding the clips- Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment- Conveyor belt length approx. 4,000 mm as NC axis- Contact and clamping cylinder- Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered- Workflow automatically in flow--------------------------------------Technical specifications:- Screw height 50-120 mm- Profile length 350-3,500 mm- Table height approx. 950 mm--------------------------------------Total price of the machine ex works: on request!Freight costs within Ger ...

Gold – Inserts System Tools Box window set Product Name: Inserts Manufacturer: Gold Werkzeuge GmbH Condition: used For the production of profiled single or box windows Slotting tools - Indexable insert version HW(HM) - Z-2 - Zero diameter 300 mm - BG test - screwed to precision threaded bushings 50/40 mm Longitudinal tools - with zero – diameter 111.5 mm Tool set consisting of: 1x slot set for frame 1x pin set for frame pins on top 1x cone set for frame frames at the bottom 1x inner profile set for glare frames inside side and top 1x inner profile set for frame inside bottom 1x inner profile set for wings inside all around 1x slot set for grand pianos 1x cone set for wings 1x outer profile set for wings all around 1x outer profile set for wings - middle seam Price: 3.750,00 € plus VAT from location Grunow (Brandenburg) Shipping is of  ...

Working width: 3550 mmWorking height: 2250 mmNumber of cylinders: 5 St.S+S hydraulic frame press RP 1200-------------------------------------Working width 3,550 mmWorking height 2,250 mm-------------------------------------with medium pressure beam-------------------------------------still in use-------------------------------------Technical information according to the manufacturer - without guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.