We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 212)
used
Code: 0265 Brand: ISVE Model: ESC JUNIOR/5 - CE Standard Vacuum dryer for wood with electric heating - CE Standard Capacity m/cubic 0,7 Electric heating Machine body in stainless steel N° 5 heating plates mm 480 x 5000 x 10 - 422W/each Wood pile size mm 5000 x 480 x 400 h Installed power: N° 1 oil vacuum pump with motor Kw 0,75 - Heating elements Kw 3,75 Door opening by means of N° 2 pneumatic cylinders Electric control panel Instruction manual Overall dimensions mm 5900 x 1000 x 1200 h Weight kg 1000
new
table length: 1300 mmtable width: 800 mmstroke height: 1010 mmweight max. in kg: 2000 kg: 190 mmconnected load frequency: 400 Vtotal power requirement: 0,75 kWstroke speed - idle stroke upwards: 40 sek.stroke speed - idle stroke downwards: 30 sek.weight of the machine ca.: 0,28 tdimensions of the machine ca.: 1,3 x 0,8 x 0,23 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Chip extraction unit model ASA 2 with 2 extraction filters and 2 filling bags Motor 2.2 KW Air flow 2300 cbm/h Year of construction 2011 with complete pipe distribution
new
Power: 650 Watttank capacity: 5,5 llength: 515 mmwidth: 430 mmheight: 825 mmweight of the machine ca.: 36 KgProfessional 650 watt construction dryerRecommended room size 40 - 50 m², height max. 2.6 mSound pressure level approx. 52dBDehumidification capacity 28 L/D - 51 L/DThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 7 m²
Room extraction dust with extension unit and Octopus 20 workbench Further data on request or see photos
new
table length: 1300 mmtable width: 800 mmstroke height: 1015 mmweight max. in kg: 3000 kg: 220 mmconnected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,32 tdimensions of the machine ca.: 1,3 x 0,8 x 0,23 mThe hydraulic lifting tables are electrically driven and operated.Have a contact strip for safe lowering operation.Wide applicability for workshops, assembly departments, loading pits, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Vacuum dryer model KVT 200, WW heated, length 6m, diameter 1400, little run with slide-in trolley, year of construction 1989
height of stroke: 820 mm0: 1500 kgTable dimensions: 1300 x 800 mmstroke speed: 26 sec.0: 1,5 kwweight: 280 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
1.Pipe belt conveyor RGFO 1200/900 x 37000 version with foldable upper half, clamping station manual, drive approx. 11 kW, with scraper, 2 level monitors, Hopper and transfer hopper built in 2011 2. Vibrating screen 3 levels / 3 sqm, motor 3 kW 3. Screw conveyor 3 x 500 mm, motors 3 x 7.5 kW
used
coolant capacity: 500 lFilter capacity: 800x900 mmdimensions of the machine ca.: 2x1,4x1,5 mtotal power requirement: kWweight of the machine ca.: 1 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Vibrating screen, motor approx. 5kW
Load per column: . 0Load per cantilever: . 0Cantilever lenght: 600-1000 mmRack height: 1500 mmwidth: 4000 mmCantilever rack 4 levelsThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.about usmore than 500 machines in stockover 8500 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Centrifugal chemical-resistant plastic Casing and impeller of fan are suitable chemical-resistant plastic and aggressive media in the process exhaust air. Manufacturer Hürner spark GmbH 35325 Mücke Atzenhain Type 16-RU 315 MN/0/1420 Factory No. 2-29191/00 Built in 1999 Air flow / volume 2166 / 1900 m³/h Power 1.50 KW, 1619/1420 RPM. Pressure difference PA 1287/990 Conrad Meiseberg home electric motor Type 90 L-4 DR No. 304987 3.4/6 A, 50 Hz, 1.5 KW, 230/400 V Star/Delta ISO F, IP55 1420 RPM., cos phi 0.82
new
table length: 1300 mmtable width: 800 mmstroke height: 190 / 1010 mmweight max. in kg: 2000 kgtotal power requirement: 0,75 kWweight of the machine ca.: 280 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Portable fan / exhaust fans Stratos Ventilatoren GmbH Fan with ABB electric motor 0,75 KW, 400V, 50 Hz, 1,9A, 2850U/min Used
used
Length: , mmDepth: , mmHeight: , mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Capacity max Kg: 400 Total connection KW: 1.1
used
Diameter: 250 mmTotal length: 2500 mm: Nadelfilz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Drying container WISSMATEC Continuous dryer Drying system Year of construction 2024 Drying floor with slotted bridge sheets Hydraulic moving floor Outlet opening at the rear Filling and exhaust air opening at the top Drying capacity is dependent of material Material Material moisture
used
Extraction unit, manufacturer: HÖCKER POLYTECHNIK, year of manufacture: 2010, consisting of: 2 purge air filter systems, type Multistar SL18/6, air flow rate 100,000 m³/h, filter area 816.8 m², rotary valve, clean air fan, pipes, purge air filter system, type Multistar SQ 10/5, air flow rate 30,000 m³/h, filter area 288.8 m², rotary valve, clean air fan, piping to outer skin property, without pictured rotary lobe blower KAESER
used
Sawn timber sorting and packaging line 2.90-5.20m Sequence description Dispensed Home & Dispensers Side goods are collected separately by means of conveyor belts into two stacks on top of each other. The storage tanks are emptied via the separation conveyor to the board feeder and board turner. At the Zuteil-u. The operator is located at the turning station, who is responsible for monitoring and assessing the quality of the boards. All boards are inspected from two sides and then electronically measured, this is done according to length, width, thickness and thickness. Quality in transverse transport. About the Wende-u. The cut goods are sent to the sorting conveyor, after which they are sorted into the 30 boxes At the end, stray sorting conveyors are transported away by conveyor belt. The belt boxes are emptied by lowering and disengaging the belts. Subsequently, the respectiv ...
used
Extraction system, Manufacturer: FELDER, Type: RL350, Year of manufacture: 2019, Power: 11 kW, Flow rate: 6,920 m³/h, Weight: 825 kg
new
VSA 48 EL Feed apparatus VSA 48 EL max. extension: 1050 mm 4 feed rollers Plastic cover of feed rollers Metal gearbox with hardened gears 8 speed levels Engine power: 0.75 kW 400 V Right and left run Weight: 70 kg G&STÜ-5115501
used
Extraction system, Manufacturer: FELDER, Type: RL350, Year of manufacture: 2019, Power: 11 kW, Flow rate: 6,920 m³/h, Weight: 825 kg
new
ASA 3303 Raw air extraction system Rated power 3260 m3/h, Filter area 2 x 3.6 m2, Power 400 V 50 Hz 1.5 kW, 2 dust bags G&STÜ-5123303
used
Storage tower, manufacturer: STUER, 10 levels, L/W approx. 4,500 x 5,000 mm, loading lift, PLC control with operator panel SIEMENS Simatic Panel, various roller conveyors with belt cross conveyor belts, (hammer bid is subject to reservation, sum of bids 334-350 or collective bid of item 333 will be compared after the auction closes)
new
RLA 210 Clean air dedusters Metal fan wheel Inspection opening for cleaning the bypass filter manual cleaning Extraction of wood chips Not suitable for grinding dust mobile very quiet High extraction performance with small footprint Suction nozzle 200mm Nominal volume flow 2262 m³/h Volume flow max. 3700 m³/h Negative pressure at Vnenn: 2482 Pa Filter area 22m² Dust class M Residual suction content H3 Chip drum volume: 2x165l LxWXH 1755 x 830 x 1800mm Motor 3kW 400V 50Hz Weight 259kg G&STÜ-5132100
used
Packaging line, manufacturer: ZAPPE, type: BPA/1410/FW, year of manufacture: 2002, serial no.: 212246, control SIEMENS, operator panel, type Simatic panel, best. consisting of: infeed roller conveyor, approx. 4,000x1,000 mm, belt conveyor belt system, 4-piece, each approx. 3,500x800 mm, film wrapping station, 2 sealing rails, top/bottom, 2 additional wrapping stations, manual, with sealing rail, film stretching machine BÖHL Meister/S-1000 VA, year of manufacture: 2002, serial no.: 2001.120, working width approx. 1,000 mm, label printer BLUHM Legi-Air 4040 RH, roller conveyor, approx. 3,500 x 800 mm, ejection station, packing table system, safety fence systems, control, PC HP Prodesk INTEL Core i3, keyboard, mouse, flat screen, barcode reader DATA LOGIC Powerscan, Accessories
new
1903 ASA Aspirator Rated volume flow 1900 m3/h Low pressure max. 1700 Pa Filter area 1.92m2 Chip collection volume 110l Suction nozzle diameter input 203mm Suction nozzle diameter output 2x 100mm LxWxH 1000 x 500 x 2100mm Weight 39kg Engine 400V 50Hz 1.5kW G&STÜ-5128193
used
Carton die-cutting machine, manufacturer: PANOTEC, type: Nextmode 25/07/07 3CL SBS, Year of manufacture: 2010, Serial no.: MO 51004 201, Functions: cross/longitudinal section, cross/longitudinal creasing, PC control, continuous magazine, 3 locations, carton width approx. 2,000 mm, feeder, 3 product lines, safety fence system, control PC HP, TFT monitor, keyboard and mouse, barcode reader DATA LOGIC Powerscan, charging cradle