wood working machines used for sale

used Altendorf F 45 ELMO 3 Joiners circular saws. sliding table saw Altendorf F 45 ELMO 3 heavy-duty precision sliding table saw 3 - Axis Positioning Control Scoring unit Motor 5.5 kW Saw blade max. 350 mm Electromot. Height and swivel adjustment with digital display Trimming length 3200 mm Cutting width with rip fence approx. 1200 mm Electromot. Adjustment of the rip fence with fine adjustment Swivel control panel over table 4 Speeds - Saw Blade Additional. short mitre stop ruler with stop flaps CE version Built in 1995 by handicraft Machine is WORKING IN GOOD CONDITION From stock Lieboch

Key data: 800 mm

used Schwabedissen GDHE8 Thicknessing machines. Thickness planer Schwabedissen Type GDHE 8 Working width 800 mm 4 Knife Shaft Includes set replacement fair All 8 knives freshly sharpened With planer knife adjustment gauge Planing height 250 mm maximum 2 height-adjustable sliding rollers in the table Speed of the knife shaft 5400 rpm. 2 feed speeds Motor power 10 kW Suction nozzle diameter 180 mm Dimensions 1900 mm x 1300 mm x H 1600 mm Weight with pallet 1720 kg

used PANHANS 116 Slotted hole drill presses. PANHANS 116 YOC 1987 Motor power: 1.5 kW Rated current: 3.5 A 2-lever operation max. drilling depth: 130 mm Height adjustment: 135 mm max. slotted hole length: 240 mm Height adjustment via handwheel Dowel pitch: 16 / 22 / 25 / 32 mm Miter ruler (adjustable) Length stop 1 eccentric Workpiece clamping Suction device: Connection 100 mm Table size: 520 x 290 mm Weight: 220 kg Dimensions (approx. dimensions): W: 90 cm D: 125 cm H: 115 cm

Key data: 63 mm, 22 mm

used Kölle HK 63 Surface planing and thicknessing machines. A combined Kölle HK 63 planer is sold. Gearbox was completely disassembled, cleaned, greased and adjusted. Both shaft bearings completely replaced. Thickness table adjusted to approx. 0.01 mm. Dressing tables were set parallel to each other. The feed and pull-out rollers as well as the pressure beam have been perfectly adjusted, so that there is no planing impact. Newly painted Ready for immediate use Dimensions approx. 210x120cm Planing width 63cm Planing height 22cm 4 Knife Shaft Strip Plane Knife 2 sliding rollers in the table 2 feed speeds Toothed Steel Feed Roller Steel Pull-Out Roller Loading facility available Price is gross (total price) VAT not deductible (margin scheme) The machine can and should be viewed and tried out on site, as a return and warranty are exc ...

used Brandt KDF 220 Highflex Edge gluing machines. Workpiece thickness: 8 - 60 mm Workpiece protrusion: 38 mm Edges (rolls): 0.4 - 3 mm Edge material in strips: 0.4 - 6 mm. Min. workpiece width: 70 mm (for plate thickness 8-22 mm), 120 mm (for plate thickness 23-40 mm), 150 mm (for plate thickness 41-60 mm) Feed rate: 11 m/min Machine equipment: Jointing milling unit, 2 x 2.2 kW motor Gluing unit with workpiece edge preheating Edge magazine Pressure zone with 1 driven roller, 2 non-driven rollers Cross-cut unit, 2 x 0.18 kW, pneumatic adjustment chamfer/straight Radius and fine milling unit, 2 x 0.27 kW Form milling unit 1 x 0.35 kW Profile scraper blade Flat Scraper Blade

Key data: 5300 mm, 2200 mm

used Striebig TRK 6220 A Panel saws. max. cutting width : 5300 mm max. cutting height : 2200 mm Saw blade diameter : 300 mm max. machining thickness : 80 mm Saw blade bore : 30 mm Swivel saw head : manual Saw feed : manual Saw blade speed : 4750 min-1 Slatted frame: evasive Mounting : freestanding Suction : external suction Locking saw beam : manual Weight approx. : 1200 kg

Key data: 46 °

used Martin T75 PreX Joiners circular saws. More time savings and more comfortable working. The T75 PreX supports you with its modern 10.4" touch screen control at the highest level of performance. These State-of-the-art machine operation ensures easy handling with the machine and supports you, for example, in calculating of workpiece dimensions or angles. Further data on request.

used Stela Lxhuber BT 1/6200-19,5 Chip belt dryer. Belt dryer for bark/ chips/ wood chips Dryer input capacity: 11.25 t/h Dryer output capacity: 6.25 t/h Water evaporation: 5 t/h Inlet moisture: 50% water content Initial moisture: approx. 10 % water content Electrical connected load: total approx. 182 kW Product bulk density: approx. 260 kg/m³ (wet) Fresh air parameters: temp. 10°C, 60% relative humidity Type of water-air heat exchanger: Indirect finned tube Heating medium: water-glycol mixture (120°C/ 65°C) Nominal heat output: 5800 kWh/h at +10°C outside air temperature 7000 kWh/h at -10°C outside air temperature Drying temperature: approx. 110°C

Key data: 1200 mm, 1200 mm

used Prinz Holtec Hagreb Paketkappsäge. Parcel cross-cut saw 6,00m similar. PRINZ HOLTEC electric length adjustment and saw feed, immediately available, ready to use! fully functional, fully operational, partially dismantled; Model: Cross-cut saw from Haskin AB, Swedish manufacturer; many parts are identical in construction to PRINZ systems - Year of construction: approx. 1996 - Max. package length: 6.00m - Dimensional tolerance: +/- 2 mm - Max. package dimensions: 130cm x 130cm x 6000mm - Hydraulic length adjustment for saw positioning - Hydraulic cutting feed (up, down) - Length adjustment with digital display to 1/10 mm (mm) - kerf width can be stored as offset value (kerf is included!) - Feed of the length positioning (FORWARDS/BACKWARDS) is infinitely adjustable depending on the direction (!) - Cutting feed/speed of the saw blade (UP/DOWN) is infin ...

used Lompas DN 250 Panel + Schaltschrank. Control cabinet with control panel for Lompas DN 250 pallet nailing machine; Control original GE FANUC Series 90-30 controller; keypad for machine operators; Ready for use until dismantling, dismantling, ready for loading Freight forwarding

used IMH Machinery AB Superdeck, Maschine. Used nail box (loose nails) for pallet making machine; Tilting function for loose nails for separation into the nailing machine (feed) to the nail guns; pallet production; Functional, functional. Not cleaned, not refurbished. Dimensions: 580x810mm Total width: 760mm Total height: 710 mm Shipping by freight forwarder possible

used SIBONI N45M105DT7.5RE55/16 E C.1mt Servomotor. Servo motor vector axis Author 503/ 504 complete SIBONI N45M105DT7.5RE55/16 E C.1mt 2987576121A Tested brewed part

used Tamagawa TRE TS3351N16E196. Servo motor vector axis scm Record complete Tamagawa TRE TS3351N16E196, Encoders EH38M500Z5L6X3PR Tested used part

used Festo Jigsaw. Festo Jigsaw G&-5078-M36LJ

used Würth. Würth Hand drill G&-5077-M36LJ

used Trolley. Trolley Loading area (LxWxH) 950x650x650mm G&-5074-M36LJ

used Hazet. Hazet Hand grinder D=150mm Air G&-5073-M36LJ

used Stehle HS. Steal Handrail milling cutter D = 130 x 62 x 30mm HS G&-5072-M36LJ

used HS. Profile milling cutters D = 125 x 50 x 30mm HS G&-5071-M36lJ

used KEILWERTH. Machine Type: Lathe Manufacturer: KEILWERTH Condition: good Offer Type: Used Machine Specifications: Working size: Center height 160 mm largest diameter 320 mm Drive: 0.85 kW 400 V Remark: Genuine German workmanship! Very stable and heavy design! Röhm four-jaw chuck Ø 125 mm, max. working length 800 mm, 4 speeds, various accessories, Replacement V-belt in the headstock, Spindle bore 33 mm Weight: 150 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

used Storti PS 430. Storti PS 430 medium-size wood cutting line - Italian production - max length of wood 6000 mm - minimum length of wood 2000 mm - wood diameter min / max 100 / 350 mm TECHNICAL PARAMETERS: 1. CUTTING THE PRISM PGS 2004 circular saw Minimum log length 1000 mm. Maximum log length 6000 mm. Maximum log diameter 350 mm. Minimum log diameter 100 mm. Maximum ground clearance 400 mm. Disc diameter 600 mm. Saw hole diameter 40 mm. Saw blade speed 2000/2500 RPM Feed speed 4-35 m/1 min. Spindle motor power 2X37 2X44 KW The opening and closing power of the saw blades is 0.75 KW Log feeding power 4 KW Number of programmable memories for cutting sizes - 9 TGS 84 V double crosscut saw Maximum board width 350 mm. Minimum board width 100 mm. Minimum board height 40 mm. Maximum board height 200 mm. Feeding engine power 0.75 KW Feeding speed 42 m/1 min.  ...

Key data: 1100 mm, 1 , 200 mm

used Kündig Magiq Brilliant 1. Calibration and fine sanding machine, wide belt sanding machine Kundig Brilliant with electronic segment sanding pad, inclined sanding unit and lacquer sanding. A video of the machine running can be sent on request. Ideal automatic sanding machine for interior finishing companies, also suitable for intermediate paint sanding Bind machine with combination unit and electronic link pressure beam Edge segments can be switched on and off Segment width of pressure beam 35mm Pneumatic Calibration Roller Grooved Rubberized Roller with Grain Compensation Drive motor 11kW, infinitely variable cutting speed 3 - 15 m/s by frequency converter Webbing feed infinitely variable from approx. 3 to 15 m/min Strip blow-off device workpiece-controlled Constant table height approx. 900mm due to adjustment of the upper part of the machine, thus can also be integrat ...

used ALTENDORF F45. Used ALTERDORF sliding table saw mod. F45 Serial number 07-08-10-142 Electronically controlled two-axis adjustment for tilt and cutting height with automatic gradage-dependent blade height correction Digital Rip Fence Viewer Maximum carriage stroke mm 5000 Maximum cut at the square fence mm 4420 Maximum tilt from 0 to 45 degrees Machine without engraver Maximum cut at rip fence mm 1350 Maximum blade diameter mm 550f Engine power 15 hp N. 3 blade rotation speeds: 3000/4000/5000 rpm Maximum cutting height 200 mm at 90 degrees Maximum cutting height 139 mm at 45 degrees Year 2007 EC

used Giben Sigma 105. SPECIFICATIONS: Equipment: Motorized loading roller conveyor Motorized roller stroke Slide arm with 7 pneumatic grippers Panel saw with a cutting width of 4500 mm Door pad on felt-covered platforms Sliding arm with 8 pneumatic grippers, connected by a continuous rod Lateral alignment device Panel saw width 2500 mm Vibrating chute for picking up and removing waste Shredder WEIMA model WLH300, built in 2007, motor 18.5 kW Unloading gantry 3ERRE AUTOMAZIONI model 1131, built in 2007 - length approx. 13000 mm Pneumatically operated mechanical gripping unit Motorized roller conveyor width 1700 mm length 4000 mm Side stop with idle rollers, side aligner, retractable front stop Motorized roller conveyor, width 1600 mm, length 5000 mm, concealed front stop 2 motorized floor roller conveyors, width 1600 mm, length 5000 mm 4 floor roller conveyors, width  ...

Key data: 1100 mm

used Viet Target 211. SPECIFICATIONS: 2 reels (I. 85 Shore; II. 60 Shore) Working width mm: 1100 Sanding belt dimensions mm: 2200 x 1130 Installed capacity KW: 12.5 + 0.75 Variator Complete with: - Infeed roller pressure shoe - Rotary blower unit at the outlet

used SCM L' invincibile 2150. SCM Flush-Thickness Planer Model L' Invincibile 2150: - 400mm planer, table length 2150mm - thicknessing planer, manual table lifting Machine not according to CE standards, for export

Key data: 2540 mm, 35 mm

used SCM T150 E. SPECIFICATIONS: Table size mm: 2540 x 740 Spindle diameter mm: 35 Spindle inclination: 0°-45° Speed: 3000/10000 rpm Voltage: 3800 volts Equipped with: - Electronic programmer for spindle stroke and spindle inclination - 4-roller feed

Key data: 630 mm, 240 mm, 7 kW

used SCM S63. SPECIFICATIONS: Max. machining width mm: 630 Max. working height mm: 240 Installed power: 7.5 KW Feed speed: 6-18 m/min Roller with 4 blades Voltage: 380 volts Manual operation

Key data: 4000 mm, 1300 mm, 270 mm

used SCM Record TVN 132. SPECIFICATIONS: Working Area X: 4000 Working range Y: 1300 Working range Z: 270 C-axis Tool changing stations: 24 Copy milling unit Refrigeration unit Double-sided drilling unit for drilling locks Main motor power KW: 11 Work table: 8 controlled rails Waste conveyors Xilog Plus PC Software Control Vacuum pump capacity m³/h: 250 Protective Weight approx. kg: 5000

Key data: 530 mm, 3000 mm, 4 St.

used Paoloni PF 530 N. SPECIFICATIONS: Working dimensions mm: 3000 x 530 Speed 5000 rpm Number of knives: 04 Installed capacity: KW 5.5

used SCM T 40 I. Swivel spindle milling machine SCM Samco Type T 40 I Machine No. KK/038438 Year of construction 1997 Includes 3 rollers of feed Includes table extension Swivel cutter head included Spindle diameter 30 mm Spindle swivel 90° - 45° Motor power 3 kW Engine Brake Spindle left clockwise Table size 870 mm x 560 mm Spindle clamping length 135 mm Maximum tool diameter 180 mm Suction nozzle diameter 120 mm Speed 1400/3500/6000/8000 rpm. Weight with feed approx. 250 kg

used SCM S45. Band Saw SCM Type S 45 Machine No. KK/047691 Built in 1999 Motor power 1.5 kW Engine braked With stop on table Table size 520 x 600 mm max. cutting height: 300 mm max. cutting width: 440 mm Work table can be tilted: 0° - 45° Roll diameter 450 mm Height approx. 1860 mm Weight approx. 200 kg

used SCHUKO ZM 900-2 chipper for wood chips. SCHUKO ZM 900-2 chipper for wood chips for pellets and briquettes – German production – year of production 2002 TECHNICAL PARAMETERS: filling dimension 600 x 800 mm rotor diameter 200 mm rotor width 700 mm total power 18.5 kW number of knives 26 20 mm sieve autoreverse hydraulic drawer height 170 mm spigot diameter 200 mm dimensions (length/width/height) 200 / 130 / 170 cm weight 1200 kg

used CIT-MECCANICA MASTER Band saw blade sharpening and setting machine. Code: 0268 Brand: CIT-MECCANICA - ITALY Model: MASTER - CE Standard Band saw blade sharpening and setting machine - CE Standard Cast iron construction Gears in oil bath Wheel diameter mm 180 F16 Speed rpm 2850 Tooth pitch min/max mm 2/20 Blade height max mm 50 Motor Kw 0,27 Teeth per minute n° 105 Weight kg 100

used SAMCO RP/2 Automatic bevelling machine. Code: 0267 Brand: SAMCO Model: RP/2 Automatic bevelling machine for wooden shutter pallets Bilateral bevelling of blind slats Max workpiece size mm 750 Min workpiece size mm 140 Operating speed approx 1800 slats/hour Working pressure 8 kg/cm2 Slats loader Weight kg 170

used Z+B MASTERWOOD B 29. Code: 0266 Brand: Z&B MASTERWOOD Model: B 29 Multiple boring machine with 29 spindles for kitchens, furniture, custom furniture, bathroom furniture, panels etc. Technical data: Max drilling centre distance mm 896 Distance between spindles mm 32 Table size mm 1215 x 750 Max vertical drilling depth mm 120 Max horizontal drilling depth mm 100 Motor power Hp 4 Operating pressure 6-8 atm Overall dimensions mm 1530 x 980 x 1400 h Weight kg 750

used Hettich Blue Max. Drill for drilling pot belts, drawer guides and any kind of system drilling Top condition many extras

used ISVE ESC JUNIOR/5. Code: 0265 Brand: ISVE Model: ESC JUNIOR/5 - CE Standard Vacuum dryer for wood with electric heating - CE Standard Capacity m/cubic 0,7 Electric heating Machine body in stainless steel N° 5 heating plates mm 480 x 5000 x 10 - 422W/each Wood pile size mm 5000 x 480 x 400 h Installed power: N° 1 oil vacuum pump with motor Kw 0,75 - Heating elements Kw 3,75 Door opening by means of N° 2 pneumatic cylinders Electric control panel Instruction manual Overall dimensions mm 5900 x 1000 x 1200 h Weight kg 1000

used custom-made. Used, Year of Construction 2020 Offer a custom-made drill table with length stop system from Blum as well as depth adjustment from part-time joinery in top condition for sale. The offer also includes the drill shown in the picture. In contrast to the usual machines, the table allows the clamping of all common drills, cup drills and milling cutters. It enables efficient and precise drilling of row holes, system holes and much more. Using a separate plug-in gauge, the stop reeds can be quickly adjusted to the 32mm pitch. A separately usable splinter protection with a receptacle for cross-timber dowels reduces the tearing behaviour on the underside of the workpiece. A separate microswitch automatically switches the drill off and on when it is lowered. An integrated height-adjustable dust extraction reduces the amount of dust. The substructure consists of a stable drawer ...

used Barth VakuuCar + easymotion v1.6 VakuuCar Vacuum Clamping Table. Used, Year of Construction 2016 Offer Barth VacuuCar®+ with extra accessories from a part-time carpentry workshop for sale in top condition. The additional automatic shut-off system keeps the vacuum above a separate accumulator, so that work can be carried out without the noise of the pump in the case of dense plates. Vacuum pump for continuous operation 3m3 / h / 120 Watt with dust filters Foot valve for loosening the clamped workpieces Base frame with 90° rotation axis for vacuum cups 2 vacuum flat cups 900 mm / round, 250 x 80 mm with quick-change system Pull-outs on both sides + 450 mm 5 swivel support strips made of squared timber (wood/carpet) Integrated 3-way power strip for additional devices Hydraulic height adjustment with reversible hand crank 6-way adjustable bench hooks as a support Four c ...