Проверенный дилер
Подробнее
KALTENBACH KDX 1215 und HDM 1432 Ленточные пилы
б/уПроверенный продавец
Запросить цену
Напрямую продавцу
1 / 6
Технические характеристики
· ID 169847585Ленточные пилы
- Состояние
- б/у
- Местонахождение
- Deutschland
Identifikation
ПроизводительKALTENBACH
МодельKDX 1215 und HDM 1432
Номер позиции2084-1327
Technik
Количество1
Описание
work piece width: 1.200 mm
workpiece height: 500 mm
bore diameter: 8 - 40 mm
Number of drilling agregates: 3 Stk.
spindle speed:: 150 - 1.100 U / min
tool changer: 15 Stk
saw blade diameter: 1.430 mm
cutting speed: 8 - 30 m/min
total power requirement: 43 kW
weight of the machine ca.: 20 t
dimensions of the machine ca.: m
Working Capacity
Angle sections: 80 × 65 × 10 mm to 250 × 250 × 28 mm
Channel sections: 80 × 45 mm to 400 × 110 mm
I-beams: 80 × 46 mm to 600 × 220 mm
Wide flange beams (HE): 100 × 100 mm to 1,008 × 302 mm
Special wide flange and welded T-beams: up to 1,200 × 500 mm
Workpiece Data
Max. workpiece width: 1,200 mm
Max. workpiece height: 500 mm
Drilling Unit
Number of drilling spindles: 3 (1 vertical, 2 horizontal)
Drilling diameter: 8 – 40 mm
Spindle speed: 150 – 1,100 rpm
Drilling feed: 0 – 500 mm/min
Rapid approach: 3,850 mm/min
Rapid return: 8,000 mm/min
Positioning speed: 15,000 mm/min
Automatic tool changer: 15 tool stations (3 × 5)
Clamping System
Horizontal clamping force: 25,000 N
Vertical clamping force: 4 × 10,000 N
Sawing Unit
Saw blade diameter: 1,430 mm
Saw blade type: HSS segment saw blade
Saw blade dimensions: 100 × 4 × 30 × 250 mm
Cutting width (kerf): 9.5 mm
Cutting speed: 8 – 30 m/min
Saw feed: 0 – 400 mm/min
Rapid return: 2,000 mm/min
Drives
Drilling drives: 3 × 11.0 kW
Saw motor: 18.5 kW
Positioning drives: 3 × 1.5 kW
Hydraulic power unit: 5.5 kW
Saw hydraulic unit: 3.0 kW
Vertical clamping unit: 1.5 kW
Swivel drive: 0.25 kW
Hydraulic oil heater (optional): 3.0 kW
Power
Total connected load (drilling unit): 43.0 kW
Total installed power (complete drilling and sawing line): approx. 66 kW
Pneumatic Supply
Air supply: 6 – 8 bar
Air consumption: 1,000 l/min
Dimensions
Drilling Unit
Dimensions (L × W × H): 6,650 × 1,300 × 3,730 mm
Working height: 640 mm
Weight: approx. 8,500 kg
Sawing Unit
Dimensions (L × W × H): 4,500 × 1,500 × 3,200 mm
Working height: 640 mm
Weight: approx. 10,980 kg
Total Weight
Approx. 19,500 kg (without accessories)
Electrical Data
Power supply: 400 V / 50 Hz
Control voltage: 24 V
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece height: 500 mm
bore diameter: 8 - 40 mm
Number of drilling agregates: 3 Stk.
spindle speed:: 150 - 1.100 U / min
tool changer: 15 Stk
saw blade diameter: 1.430 mm
cutting speed: 8 - 30 m/min
total power requirement: 43 kW
weight of the machine ca.: 20 t
dimensions of the machine ca.: m
Working Capacity
Angle sections: 80 × 65 × 10 mm to 250 × 250 × 28 mm
Channel sections: 80 × 45 mm to 400 × 110 mm
I-beams: 80 × 46 mm to 600 × 220 mm
Wide flange beams (HE): 100 × 100 mm to 1,008 × 302 mm
Special wide flange and welded T-beams: up to 1,200 × 500 mm
Workpiece Data
Max. workpiece width: 1,200 mm
Max. workpiece height: 500 mm
Drilling Unit
Number of drilling spindles: 3 (1 vertical, 2 horizontal)
Drilling diameter: 8 – 40 mm
Spindle speed: 150 – 1,100 rpm
Drilling feed: 0 – 500 mm/min
Rapid approach: 3,850 mm/min
Rapid return: 8,000 mm/min
Positioning speed: 15,000 mm/min
Automatic tool changer: 15 tool stations (3 × 5)
Clamping System
Horizontal clamping force: 25,000 N
Vertical clamping force: 4 × 10,000 N
Sawing Unit
Saw blade diameter: 1,430 mm
Saw blade type: HSS segment saw blade
Saw blade dimensions: 100 × 4 × 30 × 250 mm
Cutting width (kerf): 9.5 mm
Cutting speed: 8 – 30 m/min
Saw feed: 0 – 400 mm/min
Rapid return: 2,000 mm/min
Drives
Drilling drives: 3 × 11.0 kW
Saw motor: 18.5 kW
Positioning drives: 3 × 1.5 kW
Hydraulic power unit: 5.5 kW
Saw hydraulic unit: 3.0 kW
Vertical clamping unit: 1.5 kW
Swivel drive: 0.25 kW
Hydraulic oil heater (optional): 3.0 kW
Power
Total connected load (drilling unit): 43.0 kW
Total installed power (complete drilling and sawing line): approx. 66 kW
Pneumatic Supply
Air supply: 6 – 8 bar
Air consumption: 1,000 l/min
Dimensions
Drilling Unit
Dimensions (L × W × H): 6,650 × 1,300 × 3,730 mm
Working height: 640 mm
Weight: approx. 8,500 kg
Sawing Unit
Dimensions (L × W × H): 4,500 × 1,500 × 3,200 mm
Working height: 640 mm
Weight: approx. 10,980 kg
Total Weight
Approx. 19,500 kg (without accessories)
Electrical Data
Power supply: 400 V / 50 Hz
Control voltage: 24 V
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Запросить информацию об этой машине
Ваш запрос поступит напрямую продавцу этой машины.
