This ARBURG ALLROUNDER CENTEX 470 C 1500-800 Injection moulding machine was manufactured in 2007 in Germany. It has a clamping force of 1500 kN, an opening stroke of 650mm and is equipped with an injection unit with 50mm screw diameter. The plate dimensions are 715x715 mm and light between columns is 470 mm. It is still under power and can be inspected on-site anytime.

This ARBURG ALLROUNDER CENTEX 520 C 2000-675 Injection moulding machine was manufactured in 1998 in Germany. It has a clamping force of 2000 kN, an opening stroke of 650 mm and is equipped with an injection unit with 55mm screw diameter. The plate dimensions are 715x715 mm and distance between columns is 900 mm. It is still under power and can be inspected on-site anytime.

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table comes from an injection molding machine -Make: Arburg -Type: Allrounder 320-210-750 KN -Dimensions table: Ø 320 mm -Bore center: Ø mm -Dimensions: 320/320/H163 mm -Weight: 20 kg ...

• больше информации

This Arburg Allrounder 320 KS 700-100 Injection moulding machine was manufactured in the year 2001 in Germany and has 3467 production hours. It is equipped with an Arburg Selogica control unit. ...

• больше информации

Инв. номер: 7180 Тип: ALLROUNDER 320 C 600 Производитель: Arburg Год создания: 2008 Параметры: Расстояние между рулевыми тягами: 320x320 мм Усилие смыкания: 500 кН Вес впрыска: 2300 кг  ...

• больше информации

ARBURG ALLROUNDER Arburg Allrounder 720 S 3200-1300 - Plastic Injection Machine screw size:70 mm injection shot weight in Polysterol:984 g/PS closing pressure:3500 kN core drawing:2 control:Selogica daylight:720 x 720 mm opening stroke:700 mm mould height - Max./min.:300 -700 mm daylight between platens - max.:1000-1400 mm weight of the machine ca.:17,7 t - highly wear-resistant plastification unit - Technology step 3 - hydraulic plant with 3 regulating pumps - Technology step 2 - servo-controlled / two-circuit pump technology - Increased power for heating control circuits 1-6 to 3.6 kW each - clamping force increased to 350 Mp - mould blow unit 1 with pressure reducer - mould blow unit 2 w ...

АРТ.: 8697 ...

• больше информации

Машина для литья под давлением Производитель: Arburg Тип: 320 S 50-60 Год постройки: 1997 Винт: 18 мм Максимальное усилие зажима: 500 кН Максимальное расстояние открывания: 350 мм Минимальная высота установки инструмента: 225 мм Зажимные пластины инструмента (Ш x В): 498 x 498 мм Вес бью. Половинный вес макс.: 400 кг Эффективная длина винта L/D: 24 Максимальный ход червяка: 110 мм Вес формованной детал� ...

ARBURG 70T 320 KS 700 - 100 INJECTION UNIT Screw diameter: 25 mm Calculated injection volume: 49 cm³ Length / diameter ratio: 20 L / D Maximum injection rate: 88 cm³ / s Pressure on the material: 2240 bars PS plasticization capacity: 41 Kg / h Screw Speed: 37 RPM CLOSING UNIT Closing force: 700 kN Opening stroke: 250 mm Mold thickness Mini / Max: 200/400 mm Max distance between tray: 650 mm Passage between columns: 320 x 320 mm Tray size: 476 x 476 mm GENERAL Heat output: 11 kW Total installed power: 17.9 kW Quantity of oil: 120 l. Weight: 2090 Kg

Description: Closing unit: , closing force 350 kN, ,random force 32.5 kN, opening force 25 kN Opening stroke max. 350 mm Tool installation height 175 mm Distance between the clamping plates 525 mm Light column spacing 270 x 270 mm Ejector force 30 kN, ejector travel ,125 mm Injection unit: screw diameter 25 mm, effective screw length 24 l/d, screw stroke 110 mm Stroke volume 54 cm³ Injection part weight 45 g Injection pressure 2500 bar Including DÜRRSCHMIDT extraction unit ,EG-M, year 1999 Z-path 1000 mm, X-path 300 mm, Y-path 700 mm Approx. Onsite Dimension. (l x w x h): 3,300 x 1,100 x 10,800 mm, weight approx.: 2,800 kg