Used hassia series svl stickpack form/fill/seal machine. Comes with pump unit ,hot foil printer and belt. Used for sauces and dressings
Complete conveyor belt for final assembly or cleaning of vehicles. Ideal also as a conveyor belt for vehicle interior cleaning Ptuer3 With special final inspection lighting to check the vehicles and the paint Ideal also as a conveyor belt for hail damage center etc... The conveyor belt is absolutely as good as new, was only used for three months by a well-known German car manufacturer as an interim solution. Complete documentation and drawings available Control Siemens S7, touchscreen The conveyor belt was assembled in 2015 and operated for 3 months as I said. It has 2 vehicle lanes and a geaamt length of about 50m. The geaamt width is approx. 13m The exact mass can be found in the attached drawings The tape was professionally dismantled and stored. An optional technician can be provided by us for the setup. The scope of supply includes the complete bands as shown with t ...
Complete Packing Line for ampoules in blister trays with cartoning and case packing comprising the following machines: Uhlmann UPS3 blister machine, draw depth up to 28mm, upgraded by Uhlmann in 2010 with new machine controls and touch screen. Colour camera system to check product, label and ringcode. Format parts for 1, 2 & 3ml ampoules (40 strokes/minute) and 5 & 10ml ampoules (35 strokes/minute) Uhlmann C100-LA cartoner, with blister magazine feeder, magazine for booklets etc, GUK leaflet folder from stack, with Argus code reader for both sides of leaflet, carton, and leaflet in carton check. 100/minute Garvens S2 checkweigher, 400gm max weight, with rejection Pago System 214/221 labeller for vignette/bollini, and tamper evident labelling, with Wolke ink jet coder and camera checking. Pester PEWO-pack 450SN bundler shrink wrapper, with infeed stacker and shrink tunnel ...
Blister line for ampoules in "squeeze packs" consisting of Uhlmann UPS 3 Blister machine, max. drawing depth 28 mm, colour camera system for testing ampoule presence, Label and ring code, in 2010 with new machine control and touch panel by Uhlmann retrofitted, Uhlmann C100-LA horizontal cartoning machine with automatic Blister stacking, magazine for feeding booklets, etc., GUK brochure folder from stack, Laetus Argus Code reader for folding carton, package leaflet (both sides) and Package leaflet presence in folding carton, Garvens S2 belt control scale with bad ejection, maximum load 400 g, Pago System 214/221 adhesive labeling machine for application of Safety labels (Tamper Evident) on folding cartons for product safety and protection before counterfeits, 2 label dispensers to provide folding cartons with warranty closure labels. The machine is fitted with an addit ...
Leak test machine for glass containers. The machine detects hairline fissures, absence of fill, empty containers and insufficient glass wall thickness, injection bottles and cylindrical ampoules. The machine is equipped with: conveyor system, infeed belt, 4 high voltage test stations etc. The machine comes with the following format parts for ampoules: 1+2, 3, 20, 20+25 ml.
Manufacturer: HAPA type: 421 High performance labeling machine for ampoules, suitable for containers with a diameter of 8 mm to 30 mm power up to 18000 pieces / hour Label height min: 15 x 28 mm Max: 60 x 76mm Year of construction: 2002; ready for use
Husky HPN 726619 HMI Human Machine Interface FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY
Reference ID PP0283PP Category Casemaker-Inliner Manufacturer Curioni Model 618 Year Built 2005 Speed 12.000 sh/ hour Max Size 600 x 1830mm Min Size 175 x 590mm Condition Good Location Europe Availability Immediately 4 colors Vacuum Transfer with plate Max skip feed: 900mm Ceramic/ Chromium anilox rolls Chamber doctor blade system Servo Motor driven Diaphgram pump Vacuum Wheel Print direction: from up Slotting size: 8mm Slot Shaft: 2 Prescoring Die Cutting direction: Down Belt Glue System: Disk Stacker: Down
USM-USED SWEDEN MACHINES OFFER: FOR SALE One used Tetra Pak tba 19 125ml Slim filling machine, year 2006 and version 30v, With straw applicator TSA 21 and conveyors and paper Trolly for sale.
Pester Pewo Form PAL 5 for grouping transport cartons on pallets. max. 5 cartons / minute Connection voltage: 3 x 400 V+N + PE / 50-60HZ Power consumption: 13 A Securing the supply line: 25 A Operating pressure 6 bar
Stainless steel cooking island Cooking line Kitchen line Kitchen block Kitchen block kitchen line 2 gas stoves each 4-flame with oven stainless steel worktop 2 spuelen with single-lever mixing batteries 10 shelf 2 drawers 2 sockets 230V Mass approx.(HxBxT)68x265x130cm Shipping costs please ask us. Other items can be found in our shop.
Candy winding machine Otto Hensel X8000/8002, Y.O.M. 1972, with 2 formats, numerous spare parts
Operculeuse Meca S1000 A compact operculator suitable for all types of processes, equipped with fast tools and protective atmosphere. A perfect packaging machine for a small production, any launch of new products or validation of a new project. Procedures: standard, heat-retractable film, aluminum film, aluminum trays, cardboard trays, pre-cut, Inside Cut, Skin, VisioPac, Slicepak, Mirabella. Technical details: - 400V - Power: 5.5 kW - 6 Bars - Year: 2012
Packing machine Digi AW-4600 The AW-4600 is a unique device for packaging products on a tray or without a tray. This model can even handle products on fragile trays. Something that other stretch wrapping systems often have a hard time with. The compact design is easy to move and clean. The AW4600 not only packs conventional foam trays, but also products on less classically shaped trays, fragile trays or even without a tray. Production capacity up to 14 packs per minute Product size: Width: 80 to 350mm / Height: 10 to 130mm / Depth: 80 to 230mm Foil width: 350 - 500mm Weighing range: max. 3 / 6kg Classification: e = 1 / 2g Equipped with three label printers (thermal printers) Label width: 40 - 80mm Voltage: 230V (1 + N, 50Hz / 60Hz) Power: 1.7kW Weight: 300kg Year of construction: 2007 Machine dimensions in mm (WxDxH): 1350x1250x1600mm
Horizontal flow wrapper Ulma Sienna LS BI Man. year: 2013 Condition: new (50 hours in work) Horizontal flow wrapper that makes a three sealing pillow pack for irregular or difficult to drag products. Optionally can make modified atmosphere packing. This is ideal packaging machine for a very wide range of applications in the food industry and especially in the vegetable, meat and cheese sectors. - Electronic packaging machine powered with independent motors synchronized electronically. - Machine is built on a stainless steel frame in a cantilever execution, to avoid dirt and dust accumulation and allowing an optimum cleaning and hygiene. It also gives an easy access to the mechanical and electrical components. - Motorized height adjustment of the longitudinal sealing system to make it easier its adjustment. The box motion type cross sealing station is provided with 400 m ...
Webomatic traysealer TL500 Now available in great working condition this fully automatic Webomatic traysealer Tl500. This Webomatic is supplied with an Oxygen safe 300 m3/h Bush vacuum pump, making it suitable for packing with a high oxygen* concentrated gas creating a Modified atmosphere tray (MAP-packaging). Optionally this machine can also be supplied with a regular busch 300 m3/h vacuum pump. The machine comes with 1 mould with the following traysize dimensions; 325 wide - 265 long - 100depth (variable) The TL500 is known for it's compact footprint making this machine very easy to install in compact production facilities. Have a look at the video of the actual Webomatic still in production in the poultry industry. More information can be found on the official webomatic website.
Operculeuse Meca S 3500 Flex Year: 2013 Tension: 400 V Power: 20 kW Dimensions : 7400 x 1200 x 2000 mm (L x l x H) Pressure: 6 Bar Maximum rate: 1800 trays per hour
Used ILAPAK model Delta 3000 LD flow pack machine. Year of manufacturing 2000. Previously used on packing hard cheese in 150-250g bits. The machine is not equipped with checkweight system. Very good condition.
This machine is modified to produce 500g bricks of butter. Dimensions of the brick are: 100 x 75 x 35 [mm] (length x width x height). Capacity is up to 75 bricks per minute. The machine was fully reconditioned. Taken apart and assembled back with all used parts reconditioned or changed. It is equipped with an inverter on the main drive (smooth speed adjustment), aluminium hopper and paper centring mechanism (layout of the paper is centred on the brick).
Minipack Mini-Stretch Table Top Stretch Wrapper We have 3 of these machines from 2004, they were never used - BRAND NEW CONDITION. Wraps up to 12 per minute, Four way stretch including Auto reset.
3 pieces autom. Strapping, Hunter - used - : Price / piece from location: 2.250.-€ (net), dismantled and loaded! Manufacturer: Jäger Type: JU-200E/9mm Built: 2018 Frame dimensions: W=850 x H=600 mm Minimum packaged goods dimensions: W=130 x H=20 mm Max bulkcargo weight: 100 kg Working height: 810 mm Strapping power: up to 29 / minute Strapping bandwidth: 9 mm Strapping tape thickness: 0.55 - 0.75 mm Roller core: 200 mm Tape tension: 7 - 50 kg Machine dimensions: B=1430xD=620xH=1540 mm Machine Weight: 220 kg Noise level: 83 db (A) Connection value: 230 V, 50 Hz, 1.2 KW Former new price: 4.500.-€ (net) / device Condition: very good – the machines were rarely used even in this short time! Available: now Location: Munich Manufacturer's text: High technical standard and simple design Easy to operate and maintain High-quality stainless steel table top w ...
Used impact packaging machine ALPMA, Type: U-64/D For soft angular products, such as Brie cheese Capacity max. 50 pcs./min. Weight 900 kg Sightseeing and test run are possible by arrangement.
approx. 12 pieces Mosca (+ 1x Jäger) strapping machines - used - : Prices / pieces (net) from location: Machine 1: only 1,950.-€ Machine 2: only 1,000.-€ Machine 3: only 2,250.-€ Machine 4: only 1,950.-€ Machine 5: only 2,950.-€ Machine 6: only 1,500.-€ Machine 7: only 1,250.-€ Machine 8: only 1,500.-€ Machine 9: only 500-€ Machine 10: only 2,500.-€ Machine 11: only 2,250.-€ Machine 12: only 1,950.-€ Machine 13: only 1,950.-€ Available: from now on, or by arrangement Location. Area Aachen Machine 1: Manufacturer: Mosca Type: RO-M-P4 Built: 2001 Height: approx. 1.30m Channel width: 60cm Channel height: approx. 50cm Control voltage 24V Condition: good Machine 2: Manufacturer: Mosca Type: RO-TR500-4 Built: 2001 Channel width: approx. 50cm Condition: for slaughter!!! Machine 3: Manufacturer: Mosca Type: RO-TR700-4 Buil ...
2 automatic carton strapping strappers with holder - used - : Prices per device (net) from location: 1.950.-€!! Manufacturer: unknown Model: unknown Year built: unknown Channel width: 85cm, Channel height: approx. 59cm Device width: approx. 62cm Device length: approx. 1.60m Height treadmill level: approx. 96cm Device height incl. holder: approx. 2,60m Bandwidth: max. 12mm Condition: good Available: from approx. Early October Location: Frankenberg Camp (Saxony)
4 x Mosca straminating machine, strapping machine Sonixs TR - used - : Prices per device (net) from location: 4.250.-€!! Manufacturer: Mosca Type: SONIXS-TR-P strapping machine BJ 2015 Mains shape 2L+N+PE, 2.5A. 400v Condition: good Available: from approx. Early October Location: Frankfurt am Main
Film width 424 mm Thickness 0.3- 0.7 mm
Strapping machine by polypropylene tape for cartons or similar for containers size of min.100mm width and 30mm height and max. inside the opening. The polypropylene tape should be 0.55-0.65mm thickness.
This machine is modified to produce 500g bricks of butter. Dimensions of the brick are: 125 x 75 x 58 [mm] (length x width x height). Capacity is up to 60 bricks per minute. The machine was fully reconditioned. Taken apart and assembled back with all used parts reconditioned or changed. It is equipped with an inverter on the main drive (smooth speed adjustment), stainless steel hopper and paper centring mechanism (layout of the paper is centred on the brick).
Battery strapping device, Cyklop CMT 250, incl. 2 battery and charger.
The horizontal packaging machine SWIFT made for making packages of the type FlowPack. Packaging, wrapping or bagging all types of food like biscuits, balls, connected products, bars or non-food products. An extremely versatile machine with a compact design, SWIFT can accommodate a wide range of products thanks to its adjustable forming box, offering the solution for fast and efficient size changes. The configuration change can be made in about 3 minutes, without compromising packaging speed. It may be integrated into a mass production line, or be considered for a single workstation. Horizontal packing machine with rotating sealing jaws, designed to wrap at speeds of up to 100 bags per minute (depending on the products and packaging material). Condition: Very good Specifications: Maximum power consuption, kw 3,1 Power: 380V, 50Hz 3ph Weight, kg 400
Used VC999 TS 1200 Automatic Tray Sealer. It is a compact and highly efficient linear machine that closes automatically prepared trays by heating the top film. This can be done either with or without inert gas. The trays are placed either manually or automatically in the machine's loading bay, transported to the sealing station and after closing, are discharged with an outfeed conveyor. It is possible to create skinpacks as well as to close cardboard trays with cardboard lids for deep-frozen products or in polystyrene trays. Performance (cycles/min) Vakuum-Gas-flush (MAP): 6-10 Sealing only: 10 - 14 Film: Width(Max.): 410 mm Roll diameter(max): 300 mm Core diameter: 70-76 mm Tray hight: 18mm-120mm Manufacturer: VC999 Model: TS 1200 Height: 1600 mm Width: 900 mm Length: 3500 mm Weight: 930 kg Electric power supply: 400V 50Hz 3N Total power: 5 kW
Manufacturer: Soco System Model: T10 Year: 2006 Max box dimensions: height: 750mm wide:900mm LOWER GLUE HEAD IS MISSING !!!
Machine dimensions / mm L3830xA1200xH2020 Working height 900-950 mm. adjustable Approximate weight 1350Kg Maximum film width 520 mm Maximum bobbin diameter 350 mm. Diameter mandrel / mm 76 mm. Output height of product 600-700 mm. adjustable Output ribbon width 680 mm. GENERAL CHARACTERISTICS - Structure in stainless steel AISI 304 - Air cooling - Trays drag by stainless steel rods and dragged by chains - Adjustable chain speed with exit and stop ramp - Cycles / min: 6-10 according to pumps - Sealing function - Vacuum function + sealing - Vacuum + gas + sealing function - Gas flushing function + sealing - Vacuum function + gas flushing + sealing - Skin +0 function - Skin +20 function - Capacity 2 GN 1/2 trays - Capacity of 3 trays of 1/4 GN - Capacity of 4 trays of 1/8 GN - Touch screen 5.7 "in color with 10 different programs - 10 programs - Container c ...
Used Spomasz Gniezno packing machine type XPG-40. The packing machine cubes pasty products: butter, lard, margarine, cottage cheese, ground meat, ice cream, yeast. All activities related to forming the packaging, portioning the product, rolling the cube are carried out automatically. Technical data: efficiency: 90 pcs / m power demand - 2.2 kW; weight - 1.600 kg Overall dimensions: 3030x2700x1800mm. Tooling for a whetstone 100 grams. Dimensions for the form: width: 40mm length: 80mm and width: 75mm length: 100mm
Vacuum packaging machine Comet Type: X300 Technical data: Chamber size approx.: T45 x W57 x H18 cm 1 welding beam Welding length: approx. 45 cm Double weld Max bag size: 570 x 450 mm 2 shelves Plexiglas lid Connection value: 380 V / 50 Hz / 16 A / 1.1 kW High-performance vacuum pump: 40 m3/h Outer dimensions with closed lid: T75 x W55 x H103 cm mobile on 4 wheels, 2 braked Device is plug-in ready, ready to use! The vacuum machine works perfectly, condition see original pictures! Email or call questions
Spare parts for Polypack packaging machines New and used
We offer replacement and wear parts for all common scrap baling presses of German manufacturers, such as Lindemann, Becker & Prünte, Becker, Oberländer, Leimbach.
ROCK BOTTOM PORICE. Blown film machines GEBRAAUCHT in giuter condition for processing HD- LLD- and LD-PE, film widths from 850 mm to 1,350 mm. Capacity depending on the nozzle diameter. Nozzle diameter from 40 mm to 125 mm. Higher outputs and tighter tolerances can be produced with new cooling rings. Fully equipped. Built from 1983 - 1990. From plant closure. Also Films + Technology e. Kfm. D-73773 Aichwald Tel. 0049 711 364341, Fax 0049 711 363703
OMB PA EXTRUDERS N.4 units available. used only with virgin PA to make shoe soles directly into i.m.press. feeding unit SB PLASTIC CTB 5/I year 2001 screw diam. 110 mm 27 LD 67 kw drive 1500 rpm installed power 123,5 kw heaters 30 kw + aux 4 kw + extr.consumption 30 kw NEW OMAP SH-650 C year 2004 drying unitconstruction year 2001 electrical cabinet including injection molding presses for samples very good conditions constructed in 2001-2004, stopped in 2006 price for 1 machine
New mounting plate for VX add-on cabinet system RITTAL, - 2 x width: 1200 mm x height: 1.800 mm - 1 x width: 800 mm x height 1800 mm, price per piece: â?¬100,00 + VAT
Pipe: 110 - 200 mm Screw 60-120mm, drive: 25 kW, PVC, degassing, counter-runner, PVC pipe head 110-200mm, pipe calibration bath up to 200mm, pipe cooling bath up to 200mm, 6-band pipe extractor Battenfeld R 200/6, pipe saw Speedex up to 200mm,
PE Co-Ex pipe system (marking strips) for 20 - 160 mm PE, PP, DC motor 79 kW, main extruder 90mm, co-extruder 30 mm, Co-Ex-pipe head 20-160mm, vacuum cooling bath (6m), 4-band pipe extractor (20-250mm), pipe saw (up to 160mm) incl. 1 set of pipe tool + calibration. Power: approx. 150-300 Kg/hr.
3 t, coil OD 1,600 mm 20 - 500 x 0.4 - 4 mm
New complete line for recycling PET and PE materials. The line still in wood box.
SERAC line for filling and closing drinking vials with liquida and powder ("vitasprint B12") consisting of: bottle drop-off plate (diameter approx. 800 mm, feed approx. 430 x 470 mm (BxD), SERAC GAIA R1V1520 filling and sealing machine with Flexicon (Watson Marlow) PD12l peristal pump (3 filling stations, SERAC GAIA R1V1520 filling and sealing machine with Flexicon (Watson Marlow) PD12l peristal pump (3 filling stations, SERAC GAIA R1V1520 filling and sealing machine with Flexicon (Watson Marlow) PD12l peristal pump Dosing range from 0.2 to 250 ml.) and two sealing stations (entry stations for plugs, etc.) incl. closure feeders via sorting pots, transfer to SERAC GAIA RP1E1E1/520 filling and Closing machine with Enflex DS-80 screw feeder and two sealing stations (1x press-in station + 1x bruising station) incl. locking feeders via sorting pots, 16-digit bottle transport stars, equipped f ...
MACCHI 3 layers co-extrusion blown film line for LDPE Year 2002 3 layers Product structure: A-B-C Thickness range: 20 – 200 micron Raw materials: LDPE and mix with LLDPE, PP, EVA, MDPE Useful width (mm) 1100 Calenders width (mm) 1200 Output range 200 kg/h Extruder A: Screw diameter 55 mm; with gravimetric dosing unit Extruder B: Screw diameter 65 mm; with gravimetric dosing unit Extruder C: Screw diameter 55 mm; with gravimetric dosing unit Extrusion die: Circular die; diameter 220 mm Cooling air 5 – 20 °C Set of 2 calenders mounted on oscillating frame with rotating gusseting No Thickness measurer Automatic Rewinder, double, back to back; 7 – 110 m/min Max diam. on rewinder (mm) 400 – 1200 mm (diameter of carton cores: 76 mm) Corona treater before printing group Installed power 300 kW Height 10 m 4 colors flexo stack printing group; column with two-disc sy ...
Filling Line Krones 36000 bph for CSD in returnable glass bottles – 2007 This line is in good condition and with very low operating hours. I was commissioned in 2008 but used only less than 5000 hours for filling coca cola. It has no crate depalletizer nor crate palletizer, also labeling machine is not a part of the line, otherwise line is complete. Ready for immediate relocation. Main characteristics Manufacturer KRONES, Gassner Manufacturing year 2007 Filling Product Carbonated Soft Drinks Capacity 36.000 bph at 0,3l returnable glass Operating hours Less than 5000 hours Used bottles 0,3 l with diameter 61 mm and height 220 mm Cap Crown Cork Filling temperature 13°C Max CO2 content 7,5g/l Secondary packaging Plastic crate 6x4 Control PLC Siemens S7 300 Voltage 415V - 50 Hz
This filling line is suitable for carbonated and non-carbonated water and soft drinks. The line was installed in 2004 by SIDEL and it is still in operation till spring of 2020. It is a complete line from blow molding to palletizing and pallet wrapping – only PET compressor, bottle and pack conveyors are not included Equipment is well maintained and in good condition. Main characteristics: Capacity 14 000 bph in 1.5 and 2.0 liters PET Type of product Carbonated and non-carbonated soft drinks Manufacturing year 2004 Neck format PCO 1881 - 28 mm, short neck Pack type Shrink pack 2x3 List of main equipment: • Blow molder, SIDEL SBO 10 Serie 2+, bottle formats 1.5 and 2.0 ltr, delivery includes molds, chiller, preform hopper and feeder • Rinser-Filler-Capper SIDEL, type RV-P60/80.10KAOR with 80 filling valves and 60 rinsing positions, capper AROL with 10 capping h ...
1.2 t, coil OD 1,650 mm 20 - 300 x 0.4 - 3.5 mm