We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Производитель:
(Категория: 103)
б/у
Key data: 300 mm, 300 mm, 400 mm
КРЫШКА FP2 NC. Машина прошла капитальный ремонт. Машина полностью функциональна. Чан. будет отражено в аккаунте Для получения дополнительной информации, пожалуйста, свяжитесь с нами Данные: Скорость вращения шпинделя от 31,5 до 3150 об/мин, держатель инструмента SK 40, подача от 2 до 3600 мм/мин, быстрая траверса 4000 мм/мин, ход X 300 мм, Y 300 мм, Z 400 мм, зажимной паз стола с 4 канавками, зажимная поверхность 620 x 390 мм, управление DECKEL DIALOG 4, поворот шпиндельной головки на 180°
новый
x-travel: 300 mmy-travel: 200 mmz-travel: 350 mmtable-size: 700 x 200 mmspindle taper ISO: 40 turning speed range - horizontal: 150 - 1660 U/minturning speed range - vertical: 110 - 1230 U/minquill stroke: 120 mmspindle drive: 3,0 kWweight of the machine ca.: 1,15 tdimensions of the machine ca.: 1,31 x 1,38 x 1,65 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Номер инв.: 7169 Тип: RM 80 Производитель: Wera Год создания: 2002 Параметры: Операционная система: SIEMENS SINUMERIK Максимальный диаметр шестерни: 80 мм Вес машины: 3500 кг
новый
x-travel: 600 mmy-travel: 300 mmz-travel: 440 mmtable-size: 1120 x 260 mmspindle taper ISO: 40 spindle turning speed range: 35 - 1600 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,36 tdimensions of the machine ca.: 1,65 x 1,32 x 1,65 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Номер инв.: 5833 Тип: FKH 50 Производитель: TOS Создано: 1987, GO 2017 Параметры: Система управления: Brázdil Наработка: 500 ч Максимальная скорость вращения шпинделя: 1800 1/мин Перемещение по оси X: 940 мм Перемещение по оси Y: 940 мм Перемещение по оси Z: 470 мм Мощность шпинделя: 7,5 кВт Держатель инструмента: ISO 50 Точность: 0,02 мм Удлинитель шпинделя: 120 мм Высота машины: 3200 мм Длина машины: 2800 мм Ширина машины: 2600 мм Оборудование: Опорные плиты Ручки Проведен капитальный ремонт
б/у
x-travel: 1600 mmy-travel: 710 mmz-travel: 710 mmControl: Heidenhain TNC 124 turning speed range - main spindle: 12 - 1600 min/-1tool taper: SK50 table surface area: 2200 x 550 mmmax. table load: 3000 kgnumber of T-slots: 5 T-slot - width: 20 mmT-slot - distance: 9 mmrapid travel x/y/z: 5 / 5 / 2,5 mm/minweight of the machine ca.: 9 tdimensions of the machine ca.: 3,5 x 2,80 x 2,75 mUniversal bed milling machine- Huron head manual- automatic Tool clamping- Handwheel- Central lubrication- Machine light- Table enclosure- Footswitch- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Inv. Num. : 6561 Тип: VMC 40/8 Производитель: Strojtos Год создания: 2005 Параметры: Система управления: Heidenhain 530 Максимальная нагрузка на стол (равномерная): 500 кг Перемещение по оси X: 800 мм Перемещение по оси Y: 400 мм Перемещение по оси Z: 500 мм Скорость вращения шпинделя: 8000 1/мин Количество осей: 3 Конус: ISO 40 Вес машины: 4350 кг Оборудование: Измерительный щуп Heidenhain Держатель инструмента
новый
x-travel: 600 mmy-travel: 300 mmz-travel: 350 mmtable-size: 1120 x 260 mmspindle taper ISO: 40 spindle turning speed range: 67 - 2010 U/minquill stroke: 120 mmbore capacity in steel: 40 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 1,58 x 1,45 x 2,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Номер инв.: 6633 Тип: RLG 470-2 Производитель: LENZ Год создания: 2006 Параметры: Система управления: Экран Meyer Sinudyn Максимальная скорость вертикального шпинделя: 60000 1/мин Перемещение по оси X: 470 мм Перемещение по оси Y: 650 мм Перемещение по оси Z: 50 мм Точность: 0,003 мм Высота машины: 1550 мм Длина машины: 1820 мм Ширина машины: 1720 мм Вес машины: 2500 кг Оборудование: Техническая документация Единица измерения температуры
б/у
x-travel: 500 mmy-travel: 300 mmz-travel: 380 mmturning speeds: 40 - 2000 U/mincontrol: konventionell quill stroke: 100 mmspindle drive: 3,0 kWtool taper: SK 40 table-size: 420 x 800 mmtotal connection load: 4,5 kVAweight of the machine ca.: 1,25 tdimensions of the machine ca.: 1,4 x 1,0 x 1,9 mUniversal milling machine- Coolant system- SK40 tool holder- Rapid traverse- some tools see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Инв. : 7288 Тип: FTC 1000 Производитель: Heller Созданный:- Параметры: В хорошем техническом состоянии.
новый
x-travel: 1000 mmy-travel: 300 mmz-travel: 400 mmtable-size: 1320 x 360 mmspindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/mintotal power requirement: 4 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,1 x 2,1 x 1,95 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Inv. Num. : 7298 В хорошем техническом состоянии.
б/у
x-travel: 11200 mmy-travel: 3130 mmz-travel: 1000 mmControl: NUM 1060 W A-axis: +- 120 °c-axis: +215/-210 °spindle motor: 15 kWspindle taper: HSK-F63 turning speeds: 24000 U/mintable width: 1500 mmtable length: 9400 oder 2x3000 mmtotal power requirement: kWweight of the machine ca.: 20 tdimensions of the machine ca.: 14,6x5,0x4,225 mUse:e.g. for processing aluminum panels, drilling profiles, advertising (signsmilling, etc.), mold construction (prototypes) and processing of light steel frames / -beams using HSC millingThe vertically arranged high-frequency milling spindle for automaticTool change is mounted in a fork head on the Z-axis plate. TheSpindle can be moved with the fork head in 2 NC axes, in the A axisand the C-axis. The vertical movement is carried out via the Z-axis.Liquid cooling via a cooling unit.Tool magazine: moving plate changer in the potal, outside theWork areaMinim ...
б/у
Inv. Num. : 7310 Тип: KX3 Производитель: Numco Созданный:- Параметры: Система управления: MACH 3 Максимальный диаметр цилиндра: 20 мм Длина рабочего стола: 450 мм Ширина рабочего стола: 160 мм Максимальная скорость вертикального шпинделя: 5000 1/мин Перемещение по оси X: 300 мм Перемещение по оси Y: 150 мм Перемещение по оси Z: 290 мм Конус: MK3 Высота машины: 1750 мм Длина машины: 800 mm Ширина машины: 780 мм Вес машины: 220 кг
б/у
x-travel: 1100 mmy-travel: 600 mmz-travel: 500 mmControl: Heidenhain TNC 335 B tool taper: SK40 table surface - upper: 1650 x 700 mmtable face - lower: 1870 x 300 mmspindle speed:: 3000 Upmspindle motor: ca. 9 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHorizontal and vertical millingPosition change of the head is done manuallyVertical head with drilling quill, drilling depth 100 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Key data: 450 mm
Номер инв.: 7356 Тип: WF 21 D Производитель: Микрон Созданный: Параметры: Система управления: Heidenhein TNC 355 Длина рабочего стола: 800 мм Ширина рабочего стола: 460 мм Перемещение по оси X: 450 мм Перемещение по оси Y: 400 мм Перемещение по оси Z: 400 мм
б/у
x-travel: 3000 mmy-travel: 600 mmz-travel: 800 mmControl: Heidenhain TNC 426 tool changer for ... units: 48 turning speeds: 9000 U/minfeed: 3000 mm/minrapid traverse: 30 m/mintotal power requirement: 15 kWsvivel milling headinner cooling center with coolant system: 20 barfull encapsulationhydraulical clamping 4 circuit, 400 barside loading doorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Номер инв.: 7252 Тип: SMX Производитель: REXIM Создано: 2018 Параметры: Длина рабочего стола: 1350 мм Ширина рабочего стола: 355 мм Максимальная нагрузка на стол (равномерная): 600 кг Максимальное расстояние между шпинделем и столом: 520 мм
б/у
x-travel: 164 mmy-travel: 210 mmz-travel: 70 mmControl: CNC 6000 turning speeds: 40000 U/mintool adaptor: HSK E 25 tool change unit: 7-fach total power requirement: kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2,3x1,0x1,9 mHSC Milling Machine Portal stand construction for milling and engravingHigh-frequency spindle HFS 301 40,000 min-1, 3000 watts, HSK 25 E recordingTool length scanLaser sensor system for measuring the workpiece length and workpiece diameterNC controlled part head CNTK 200 center height: 200 mmClamping device of a groove tableClamping device for clamping round componentsCoolant circulation systemCollet holderAlpha CAM software (AC Mill 2D)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Номер инв.: 7187 Тип: Varimat VD 2000 Производитель: KOLB Год создания: 1995 Параметры: Операционная система: SIEMENS Sinumerik Ось X: 6000 мм Ось Y: 2400 мм Ось Z: 1100 мм Масса: 83000 кг
б/у
x-travel: 970 mmy-travel: 420 mmz-travel: 430 mmControl: Heidenhain TNC 135 number of speeds: 12 speeds: 31,5-1400 U/minfeed range lengthways and crosswise: 8-2000 mm/minfeed range - vertical: 4-1000 mm/minrapid traverse longitudinal and cross: 4 m/minrapid traverse Z-axis: 2 m/minweight of the machine ca.: ca. 3,8 tdimensions: ca. 3050x2350x2320 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Inv. Num. : 6969 Тип: FSQ-C 80 Производитель: TOS Созданный:- Параметры: Система управления: Mefi CNC 859 Скорость фрезерного шпинделя: 11-2500 1/мин Максимальная нагрузка на стол (равномерная): 2000 кг Перемещение по оси X: 1100 мм Перемещение по оси Y: 960 мм Перемещение по оси Z: 1000 мм Мощность: 30 кВт Конус: ISO 50 Оборудование: Круглый
б/у
x-travel: 870 mmy-travel: 370 mmz-travel: 400 mmnumber of feeds: 9 feed range lengthways and crosswise: 20-800 mmrapid traverse longitudinal and cross: 3000 mm/minrapid traverse vertical: 1375 m/mintable-size: ca. 310x 1370 mmthroat: ca. 330 mmweight of the machine ca.: 2,4 tdimensions: ca. 1900 x 2800 x 1800 mmcover plates available (these are missing in the pictures, but they are there!)manual available!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Инв. номер: 6079 Тип: FSQ 80 с ЧПУ Производитель: TOS Год создания: 1990 Параметры: Система управления: NS 720 Длина рабочего стола: 3000 мм Ширина рабочего стола: 800 мм Максимальная нагрузка на стол (равномерная): 1000 кг Перемещение по оси X: 3000 мм Перемещение по оси Y: 1000 мм Перемещение по оси Z: 1000 мм Общая потребляемая мощность: 40 кВт Скорость вращения шпинделя: 2500 1/мин Высота машины: 3400 мм Длина машины: 7770 мм Ширина машины: 4360 мм Оборудование: Держатель инструмента
б/у
x-travel: 800 mmy-travel: 400 mmz-travel: 300 mmdigital readout: Heidenhain table surface area: 1000 x 520 mmturning speed range: 40 x 2000 U/minspindle taper: SK 40 total power requirement: 2,2 kWweight of the machine ca.: 2,2 tdimensions of the machine ca.: 1700 x 1600 x 1800 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Номер инв.: 7015 Тип: 17-10 FP NC/5 Продюсер: Вальдрих Кобург Создано: 1985 GO 2011 Параметры: Система 3D-управления: Siemens Sinumerik 840 Длина стола: 5000 мм Ширина стола: 2500 мм Максимальный вес заготовки: 60 т Вес: 125 т Вперед: 1997 2008 2011
б/у
Ход по оси X: 500 мм Ход по оси Y: 400 мм Перемещение по оси Z: 400 мм Цифровая индикация: Heidenhain 3 Конус шпинделя Achsen: SK 40 Диапазон скоростей вращения шпинделя: 50 - 2500 U/минРазмер стола: 650 x 375 мм Вес станка ок.: 1,5 тРазмеры: ок. м
б/у
Инв. номер: 6905 Тип: UNI 1000 Продюсер: Reckermann Год создания: 1993 Параметры: Система управления: Heidenhain TNC 135 Длина рабочего стола: 1500 мм Ширина рабочего стола: 400 мм Минимальная вертикальная скорость вращения шпинделя: 40 1 / мин Максимальная вертикальная скорость вращения шпинделя: 2000 1 / мин Ход по оси X: 900 мм Ход по оси Y: 350 мм Ход по оси Z: 400 мм Мощность шпинделя: 7,5 кВт Общая потребляемая мощность: 14,5 кВт Высота машины: 2200 мм Длина машины: 2200 мм Ширина машины: 2300 мм Вес машины: 3800 кг Обору ...
б/у
x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmrapid traverse: 1,2 m/minfeed stepless: 0 - 500 mm/minweight of the machine ca.: 1750 kgdimensions: ca. 1450 x 1800 x 1710 mmincluding hydraulic machine vice with turntableaccessories: various holders and cutters (see photos) as well as various milling toolsMachine was used in a public facility and is in good condition.Machine can be viewed under power by prior appointmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.