Fesadoras do tipo cama universais PARPAS SHARK One

máquinas para trabalhar metal / fresadoras / Fesadoras do tipo cama universais

logo dealer

FLECKENSTEIN Werkzeugmaschinen GmbH
[ perfil comerciante ]

Senhor Bj?rn Fleckenstein
Sommerweg 15
63831 Wiesen
Germany

  • +49-60969... telefone

revendedor
aprovado
verified user

RESALE membro desde a 2022

  • lista de máquinas (17)
Número do item: 162984800 Quantidade: 1 Data: 29.04.2024
Ano de fabricação: 2016 Localização: Land-de Alemanha Lager Kleinostheim
Preço:
Fabricante: PARPAS
Modelo: SHARK One
Tipo de máquina: Fesadoras do tipo cama universais
Descrição: Fesadoras do tipo cama universais PARPAS SHARK One

máquina usada

x-travel: 3500 mm
y-travel: 1083 mm
z-travel: 1074 mm
control: HEIDENHAIN iTNC 530 HSCI
clamping table: -
surface area: 4.000 x 1.000 mm
Thread bore with fitting: -
Feeds: -
X-, Y- and Z-axis, stepless: 2 - 30.000 mm/min
rapid travel x/y/z: 30 m/min
Max. feed force of axis: 10.000 N
2-axis Milling Head: -
2-axis milling head TUB-E92 with power on: -
Torque-Motors for 5-axis-simultaneos processing: -
capacity at 100% load: 29 kW
Speed stepless: 2- 30.000
max. torque: 92 Nm
Max. torque: 60 min-1
tool taper: HSK 62A-DIN 69893
automatic tool changer ATC: -
Tool places: 30
diameter of tools max.: 90 mm
workpiece length: 320 mm
weight of tools max.: 8 kg
changing positions: vertikal
electrical supply data: -
capacity: 120 A
voltage: 400 V
operating frequency: 50 Hz
total power requirement: 29 kW
weight of the machine ca.: 28 t
dimensions of the machine ca.: 8,3 x 6,7 x 3,6 m
Guides, drive and measuring systems
• All axis drives with digital drives manufacturer HEIDENHAIN
• Direct measuring systems for X,Y, and Z axis manufacturer HEIDENHAIN
• X-, Y- and Z-axis guidance using high-precision linear guides for maximum precision and dynamics
• Precision ball screw with preloaded nuts in X-, Y- and Z-axis

Coolant Equipment with Chip conveyor
• Coolant outlet, switchable from coolant to air, at the front of the milling head via manually swivelling nozzles
• Internal coolant supply, switchable from coolant to air, through the spindle centre.
• Tank volume approx. 1.000 l
• Normal coolant supply 25l/min 5 bar
• High pressure pump for internal cooling 20 l/min 50 bar
• Coolant tank incl. Cartridge filter and paper-belt filter system
• Hinged belt chip conveyor, discharge height approx. 750 mm

Equipment
• Machine bed, column and vertical saddle as welded steel construction, annealed with low tension
• Milling slider as welded steel construction
• Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive via torque motors
• Oil cooling unit for cooling the milling head
• CNC thermal compensation
• Spindle drive 29 kW
• Spindle speed max. 18.000 min-1
• Axle drives by means of precision ball screws and digital servo motors
• Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and automatic measuring cycles
• Milling head Measurement Kinematics Opt”
• Laser tool presetter BLUM - NT version mounted on machine table
• CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology
• Portable electronic F4427320 handwheel HEIDENHAIN HR 520 with 3 m spiral cable
• swivelling control panel for machine operation in front of the machine
• Automatic tool changer with 30 magazine places, change position vertical
• Coolant system with external shower rim and IKZ through the spindle
• 1 chip conveyor in the working area, ejection right
• Pretensioned linear guides in all axes
• Precision ball screws in all axes
• Hydraulic weight compensation in the vertical axis
• Bellows cover of the X-axis
• Milling slide above and below in the vertical axis with bellows covers with attached stainless steel lamellas closed
• Work area enclosure closed on all sides. Back side of the work area with bellows cover with attached stainless steel lamellas closed. The manual sliding doors on the front of the machine can be opened and closed over the entire length of the table.
Safety fencing for the back machine area with two secured access doors.











The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

seller offer No. resale 1118-1592
Máquina em estoque: Sim
Seller-item-No.: 1118-1592
Compartilhe esta máquina em Facebook:

Inquérito

Negociante de máquinas?

Por favor remeter opcionalmente

Enviar o pedido?

(a todos os revendedores para tal máquina)

Copie para você?

(cópia da seu inquérito será enviado para seu endereço de e-mail)

Save input data

(Save input data for further inquiries)

mais PARPAS SHARK One + similar PARPAS-Modelo

2016 PARPASSHARK One