pressure: 100 t passage width: . mm stroke: . mm tracking travel: 45 mm safety distance: 208 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• mais informação

pressão: 63 t distância entre colunas: 0 mm stroke: 160 mm se de superfície: 630 x 500 mm dayligth: 400 mm total power requirement: kW peso da máquina ca.: 5 t dimensionais da máquina ca.m  ...

• mais informação

pressure: 80 t throat: 400 mm stroke: 8 - 112 mm no. of strokes: 120 Hub/min ram adjustment: 70 mm dayligth: 412 mm table surface area: 850 x 600 mm ram surface: 640 x 400 mm column daylight: (hinten) 680 mm total power requirement: 11 kW weight of the machine ca.: 6,1 t dimensions of the machine ca.: B 1,3 x T 1,9 x H 3,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Permanently permissible maximum force: 320 ton Screw diameter: 140 mm Stroke: 190 - 320 mm Number of strokes: 30 s.p.m. Daylight: 350 mm Table surface area : 600 x 550 mm Slide area: 530 x 500 mm Free frontal opening L-R: 610 mm Free lateral opening F-B: 510 mm Table height over floor: 670 mm Required power: 22 kW Height over floor approx.: 3650 mm Dimensions L x W x H: 1400 x 1200 x 3650 mm Weight of machine approx.: 6,2 ton

Permanently permissible maximum force: 400 ton Screw diameter: 140 mm Stroke: 190 - 320 mm Number of strokes: 30 s.p.m. Daylight: 350 mm Table surface area : 600 x 550 mm Slide area: 530 x 500 mm Free frontal opening L-R: 610 mm Free lateral opening F-B: 510 mm Table height over floor: 670 mm Required power: 22 kW Height over floor approx.: 3650 mm Dimensions L x W x H: 1400 x 1200 x 3650 mm Weight of machine approx.: 6,5 ton

Nominal force: 3150kN, table dimensions: 2500x1600mm, stroke speed: 20-80/min, ram stroke: 280mm, ram adjustment: 90mm, weight: 68t, with Transfer and Sheet Metal System Dreher. ...

• mais informação

sheet width:2000 mm plate thickness:1.8 mm Controls:SIEMENS S7 PRESS DESIGN:. - frame design : H-frame :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - height above floor level:375 mm RAM:. - ram force:800 to - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):3100 mm - Free passage between side columns (width ...

Pressure:800 t distance between columns:3250 mm stroke:1100 mm Distance table/ram, stroke up:1900 mm Table surface area:3100 x 1900 mm pressure of drawing cushion in table:300 t Die cushion stroke in table:300 mm Die cushion area in table:2500 x 1800 mm Die cushion pressure in ram:80 t Die cushion stroke in ram:200 mm Die cushion area in ram:2200 x 1000 mm Ram surface:3100 x 1900 mm Side window:900 mm Oil volume:4700 l Power capacity:200,0 kW Dimensions (WxDxH):4,95 x 3,3 x 10,2 m Height above floor:7,05 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact absorption:hydraulic

Pressure:800 t distance between columns:2560 mm stroke:1050 mm Distance table/ram, stroke up:1870 mm Table surface area:2500 x 1730 mm pressure of drawing cushion in table:300 t Die cushion stroke in table:395 mm Die cushion area in table:2300 x 1300 mm Ram surface:2500 x 1730 mm Die cushion pressure in ram:63 t Die cushion stroke in ram:150 mm Side window:1000 mm Oil volume:4300 l Power capacity:200,0 kW Dimensions (WxDxH):4,1 x 2,8 x 10,0 m Height above floor:7,0 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable

Pressure:800 t distance between columns:3550 mm stroke:1100 mm Distance table/ram, max. stroke up, adjustment up:1900 mm Table surface area:3500 x 1800 mm pressure of drawing cushion in table:350 t Die cushion stroke in table:280 mm Die cushion pressure in ram:80 t Die cushion stroke in ram:160 mm Ram surface:3500 x 1800 mm Side window:1900 mm Weight:100,0 t Floor Space (WxD):5,3 x 4,3 m Height above floor:7,3 m Height below floor:5,0 - 6,0 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact cushioning:hydraulic sliding table:without rails for moving table