presses used for sale

Electric hydraulic frame press model HAT 30 / 20, 3 upper, 2 side cylinders pressing range 3000 x 2000, Year of construction 86

pressure: 40 tdistance between columns: 700 mmstroke: 150 mmtable surface area: 700x650 mmram surface: 670x650 mmhole in the table: Ø 120 mmtable height: 850 mmweight of the machine ca.: 4 tdimensions of the machine ca.: BxTxH 2000x18000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pneumatic carcass press with 4 pressure elements from above 2 sides working area 3200 x 1600 - YOC 1975

pressure: 100 tdistance between columns: 625 mmstroke: 150 mmtable surface area: 580x450 mmram surface: 580x340 mmhole in the table: Ø 150 mmtable height: 850 mmtool hole in ram: Ø 45 mmcolumn travel -side: 200x200 mmweight of the machine ca.: ca. 6,0 tdimensions of the machine ca.: BxTxH ca. 1300x1300x2750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge press with preheating device, hydraulics, clamping length 2500 mm, mobile.

pressure: 250 tdistance between columns: 1100 mmstroke: 400 mmdayligth: 600 mmtable surface area: 1000x800 mmram surface: 1000x800 mmtable height: 950 mmtotal power requirement: 65 kWweight of the machine ca.: 25 tdimensions of the machine ca.: BxTxH 0000x0000x3900mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press with press area 2200 x 1100 with built-in mould press

pressure: 250 tdistance between columns: 850 mmstroke: 500 mmdayligth: 800 mmtable surface area: 800x800 mmram surface: 800x800 mmweight of the machine ca.: 12 tdimensions of the machine ca.: BxTxH 1600x1600x3400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heating bed length 3m Wood types FI, AI, LÄ, DG, ZI L-lamella width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target power/shift: 1500 average. Up to 2000 m2 / SCHICHT 1273 - 2073 mm 1500 average. Up to 2000 m2 / S

pressure: 25 tdistance between columns: 800 mmstroke: 100 mmdayligth: 450 mmtable surface area: 750x750 mmweight of the machine ca.: 3 tdimensions of the machine ca.: 1500x1500x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may ... WEINIG High Performance Profile Machine, Type Hydromat 22 BL Built in 1995 with splitting unit (lamella saw) Bring (au ...

pressure: 60 tthroat: 330 mmstroke: 500 mmtable surface area: 640x640 mmram surface: Ø 120 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 7 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may vary

pressure: 100 tthroat: 275 mmstroke: 150 mmtable surface area: 860x550 mmram surface: 600x400 mmtable height: 810 mmtool hole in ram: Ø 50 mmdayligth: max. 475 mmweight of the machine ca.: 7 tdimensions of the machine ca.: BxTxH 2000x2500x3300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...

pressure: 250 tdistance between columns: 900 mmstroke: 300 mmtable surface area: 850x900 mmram surface: 800x880 mmstroke: 300 mmtable height: 1050 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Board repair line with double end profiling line in top condition Workpiece parameters of the plates: Min.: 900 mm x 200 mm Weight min. : 17 mm Max .: 5000 mm x 1250 mm Max. Weight: 60 mm Weight: max. 150 kg< Accuracy: +/- 0.2 mm The portals have a max. Clock power of: max. 6 cycles / min The max. Partial performance: 18 parts / min (DEP line) Year of construction 2008 Condition: good (Original price of the line 2008 Euro 4.9 million) Consisting of: Feeding station with feeding rollers, Automatic vacuum lifting table for lengths up to 6 m Conveyor systems Repair line 1 Turning station Transfer service Repair line 2 automatic vacuum lifter for stacking (6m) Stacking roller conveyor Control cabinet with machine control Profilfraessanlage Stacking Tables; very well

Plate dimensions: 1550 x 850 mmDaylight opening: 350 mmNumber of daylights: 1 St.Heating: ja Total pressure: 60 toMotor output: kWDimensions (L/W/H): 2,3 x 0,85 x 1,73 mmweight of the machine ca.: 2,5 tElectric 380 Volt: Hydraulic veneer- or board press with printing capacity of 80 t, shutdown when the final pressure output is reached and heating in the lower/upper plate.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Briquetting press 1000 kg/h approx. 55 kW Diameter 75 mm

Plate dimensions: 250 x 120 cmDaylight opening: 400 mmtotal connected load: 20 kWElectro-hydraulic veneer press withAutomatic switching and automatic opening.Pressing area: 250 x 125 cmPressing pressure: 100 tonsCylinders: 6 piecesmax. opening: 40 cmWeight: approx. 3,000 kg- ELKOM combination heating plates with gold anodized coating (Temperature settings can be controlled separately at the top and bottom)- EMERGENCY STOP contact strip under the press table- Cable emergency stop deviceThe machine has been technically tested and is in a ready-to-use condition.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press also ideal for gluing 4200 x 450 x 60 mm Practical and space-saving 15 pieces press cylinder ( diaphragm cylinder ) with press stroke per cylinder 70 mm, pressing force per cylinder 6800 N 16 pieces of hold-down Loading dimensions L 4.5 x W 1.1 x H 0.5 m Net weight 600 kg OPTIONS the last 3 images Price on request 2 press frames for turning 3 press frames as gluing stars 4 press frames

Workpiece dimensions: 2.500 x 1.300 x 500 mmSpecific pressure: 0,9 kg/cm²total power requirement: 25 kwmax. temperature: 140 Grad: 100 m³/hWeight: 1.550 kgDimensions (L/W/H): 3.330 x 1.860 x 1.950 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Hydraulic carpentry board pressing system for the production of coffins (oak, poplar, fir and other types of wood) Dimensions of the press mm: 2100 x 1600 with 9 pistons Stroke mm: 150 Complete with: - Automatic loading - 4 pressing units - Automatic unloading - 1 saw for the cross-section max. stroke mm 2800 - 1 manually adjustable device for forming floors and coffin covers - Electrical control box Electric hot and cold operation

pressure: 200 tpassage width: 2122 mmtable surface area: 2100 x 1400 mmtotal power requirement: 60 kWweight of the machine ca.: 35 tdimensions of the machine ca.: mPress/punch with injection molding unit200 ton punch upstroke press with injection molding machine (400to)Additional guard locking via 4 power strokesManufacturer: R+S TechnikYear of construction: 2013 / rebuild 2016Mains voltage/frequency: 400V/50Hz 3~(N/PEConnected load: 60KWWeight about 35000kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Membrane press for gluing doors, curves and other wooden elements Dimensions mm: 2400 x 1120 Heating by electrical resistance Complete with decompressor, timer and tarpaulins

Working width: 4000 mmWorking height: 2600 mmNumber of cylinders: 6 St.weight: 2000 kgDimensions (L/W/H): 5550x1300x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Catalog No. 6853 TECHNICAL DATA - hydraulic clamping force - round briquette form - briquette diameter 65mm - dimensions of the tank height / width 770x940mm - sensor of the minimum level of trout in the hopper - automatic or manual operation of the machine - inspection window in the machine chute - pump motor 7.5 kW - agitator motor 0.35 kW - 2 types of screw speed 1100, 1700 rpm - screw motor 0.75 kW - dimensions length/width/height 2050x1650x1640mm - weight 895 kg ADVANTAGES – unpainted – German production – used briquetting machine - very good condition Net price: PLN 31900 Net price: 6860 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Working width: 3500 mmWorking height: 2300 mmNumber of cylinders: 4 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Catalog No. 6832 TECHNICAL DATA piston cylinders 5 pcs: - 3 vertical - 2 horizontal - max length of glued elements 3630mm - max width of glued elements 2270mm - engine power 0.75 kW - hydraulic piston cylinders - dimensions length/width/height 4450x880x2880mm - weight about 1000 kg ADVANTAGES – German production – unpainted - a hydraulic press – used press, very good condition Net price: PLN 13900 Net price: EUR 2989 Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Working width: 3500 mmWorking height: 2300 mmNumber of cylinders: 4 St.Stable frame welded construction of thick-walledSpecial hollow profiles , sliding table and pressure beam with50 mm hole pattern .On the left side continuous abutment for grouting the wide ,lower abutment in 2 levels.Vertical pressing cylinder on specialty bar with one-quick adjustment with weight compensation in the 50 mm hole patternadjustable in height. Long sliding table ensure thecontinuous recording of high jacking forces .Fast, smooth width adjustment with ball bearingCarriage with central fixation in 50 mm hole pattern.Upper horizontal press cylinder infinitely adjustable in height andequipped with counterbalance .Lower horizontal pressing cylinders with bore fortwo abutments levels without weight compensation .Abutment and pressure plate depth 100 mmMachine controlled electro -hydraulic with 2 pieces vertical ...