planing machines used for sale

Inv. Num. : 7406 Type: RISZ 16 Producer: ARTHUR KLINK Created: 1993 Parameters: Theoretical diameter of the tool: 95 mm Max. workpiece height: 300 mm Clamping surface: 400x400 mm Maximum working stroke: 1250 mm Maximum stretching force: 16 t Weight: 6900 kg

Working width: 318 / 295 mmWorking height: 170 mmMotor output: 2,25 kWLength of the planing table: 1300 mmNumber of knives: 3 St.Feed speed: 5,3 m/min.Dust suction hood: 100 mmconnected load frequency: 400 Vmachine weight ab.: 160 kgDimensions (L/W/H): 1150 x 530 x 930 mmThe planer and thicknesser is delivered almost fully assembled.For thickness planing, the same connection is used for suction as for surface planingused. However, this is placed upwards over the storage table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6696 Type: Profiset 60 Producer: SCM Created: 2018 Parameters: Number of spindles: 5 Vacuum belt width: 25-230 mm Working height: 6-120 mm Max. speed: 6000 1/min Equipment: Swivel head

x-travel: 11000 mmy-travel: 2.500 mmworkpiece height: mmtable width: mmtable length: mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 410 mm, 200 mm, 4 kW

Used, Year of Construction 2008 Operating time according to hour meter 135 h (0.02 h/day) Offer Felder AD 741 with special accessories from part-time joinery in best condition for sale. This version is one of the last series with the particularly robust 4-spindle height adjustment, which was later converted to a central spindle for cost reasons. In order to prevent possible misunderstandings, an on-site visit is possible by appointment. Delivery is to be ordered by the buyer. Motor power 4 kW direct start with brake and limit switch Planer width 410 mm Total dressing table length 2000 mm Table length feeding dressing table 980 mm Chip removal max. 4 mm - is set and displayed on the right dressing table Swivel dressing fence with anodized ruler 4-Blade Felder System Planer Shaft Thickness planer width 404 mm with automatic E-thickness height adjustment Powerdrive (min. - ma ...

x-travel: 8000 mmy-travel: 2.500 mmworkpiece height: 2.360 mmtable width: 2.240 mmtable length: 10.100 mmweight of the machine ca.: tdimensions of the machine ca.: 20,0 x 8,5 x 5,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4 , 220 mm, 150 mm

Four-sided planer, model P 22 N, 2 sets of planer heads, reversible knife – strip planer knife, sound protection hood built in 85, Weight approx. 1500 kg Spindles: 4 Working width: 220 mm Working height 120 mm

Working width: 410 mmLength of the planing table: 2.200 mmNumber of knives: 5 St.Motor output: 5 kWweight of the machine ca.: ca. 411 kg: Tersa : Ja Dust suction hood: 120 mmturning speeds: 5.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5 , 230 mm, 120 mm

Four-way planer model P 23, five-shaft machine with groove bed, Shaft arrangement down/right/left/up/down, Number of planer shafts: 5 Planing height max.: 120 mm Planing width max.: 230 mm Dressing table length: 2,000 mm Feed power: 2.2 kW Feed speed: 5 - 24 m/min Speed: 6,000 rpm Spindle diameter: 40 mm Soundproofing hood good neat condition, year of construction 94, extraction distributor

Working width: 410 mmNumber of knives: 2 St.Motor output: 4 kW: Streifenhobelmesser turning speeds: 4.600 U/min: Nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEINIG high performance planer Type Hydromat 22 BL (full checked!) Built in 1995 With safety hood and soundproofing cabin! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8- 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-Links Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared gap unit, consisting of 1 right and 1 left spindle 30 kW each (4500 rpm) incl. table roll, sliding roller, spray indentation and wedge dissipation 4 Roller pull-out Special printing and fittings for the production of top layer slats Feed (divider) for slats and pull-out tape

Working width: 530 mmLength of the planing table: 2.900 mmNumber of knives: 4 St.Motor output: 4 kWweight of the machine ca.: 850 kg: Tersa : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High-performance industrial planing machine In good condition, lots of accessories '

Working width: 410 mmLength of the planing table: 2.600 mmNumber of knives: 4 St.Motor output: 4 kWDimensions (L/W/H): 2.600 x 1.400 x 1.200 mmweight of the machine ca.: 561 kg: Tersa : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High-performance planer With chamf device good condition 223 kW Year of construction 2003 Many spare parts

Working width: 520 mmWorking height: 240 mmMotor output: 7 kWNumber of knives: 4 St.Feed speed: 5/8/12/16 m/min.weight of the machine ca.: ca. 500 kg: Tersa : Ja Dust suction hood: 120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package

Working width: 510 mmLength of the planing table: 2.250 mmNumber of knives: 4 St.Motor output: 5,5 kWDimensions (L/W/H): 2.427 x 1.340 x 890 mm: Ja weight: 750 kgDust suction hood: 140 mm: Keilleistenmesser The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multi-sided wide planing machine with chamfer unit LEDINEK SUPERLES 300 4V + 4F Planing width (min/max): 70 - 300 mm Planing height (min -max): 19 -300 mm Workpiece length (min): 2,000 mm Feed speeds: up to 230m/min Weight: 13.500 kg

Working width: 520 mmWorking height: 300 / 3,5 mmMotor output: 7 kWNumber of knives: 4 St.Feed speed: 5/8/12/18 m/min.weight of the machine ca.: 680 kgDust suction hood: 150 mm: Tersa turning speeds: 4.500 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 , 2600 , 4

Weinig planing machine Product name: Planing machine Type: AF51 Manufacturer: Weinig Machine number: unknown Year of manufacture: unknown Condition: Used Technical details: - Total table length: 2,600 mm - Feed table: 1,380 mm - Removal table: 1,080 mm - Table height: 810 mm - Chip removal: 0 – max. 8.0 mm - Stop (L x H): 1,250 x 155 mm (obliquely adjustable up to 45° without scaling) - Planing width: 500 mm - 4-knife shaft with 4 strip planing knives - Suction nozzle: 160 mm - Power: approx. 3kW - Weight: approx. 750 kg - 4 knives installed with slight signs of wear - 1 piece Barkomat adjustment gauge - the engine and the knife shafts have been re-mounted - the table lips have been re-milled (approx. 8 mm slots) to reduce the noise level. minimize Machine dimensions/set-up dimensions (L x W x H): 2,600 x 1,350 x 810 mm Transport dimensions (L ...

x-travel: NA mmy-travel: NA mmworkpiece height: mmstroke length max.: 450 mmtable length: 450 mmtable width: 350 mmtotal power requirement: 1,7 kWweight of the machine ca.: tdimensions of the machine ca.: mShaper, horizontal,mechanic,vice hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ready for use m used Pre-dressing table for copper mill planing machines Total length 2600 mm Planing width 240 mm

Number of spindles: 6 St.Working width: 240 mmWorking height: 120 mmDimensions (L/W/H): 4900 x 1700 x 1700 mmweight of the machine ca.: 3500 kgControl: CNC SCM SUPERSET NTE 31 PLUS automatic profile milling machine with 6 shafts14 axis control with touch screen - WINDOW VERSIONMachine with 6 spindlesSpindle speed 8,300 rpmWorking width 240 mm, working height 120 mmElectronic horizontal and vertical positioning of the spindlesGlazing bead cuttingTouchscreen controlsDetailed technical description, seeadjacent PDF documents.Suction nozzle diameter:1. Spindle down: 120mm2nd spindle right: 120 mm3. Left spindle: 120 mm4. Spindle top: 150mm5. Spindle top: 150mm6. Spindle below: 120mmOption: workpiece return to the operatorImages are from our archive of a machine of the same model.(Technical information according to the manufacturer - without guarantee!)The data for this ad was created with Mod ...

Four-sided planer copper mill Type: Vuin 605 Planing width 605 mm Planing thickness 3 – 200 mm in the horizontal area Planing thickness at the rear in the vertical area 80 mm Upper and lower planer shafts as 4-knife shafts 4 planer shafts 1. Bottom 5.5 kW 2. Top 7.5 kW 3. Left 4 kW 4. Right 4 kW Shortest piece length, self-continuing: 350 mm Electrically height-adjustable table Width adjustment for the rear planer heads manually via crank 2 feed speeds Suction nozzle diameter 3x120mm, 1x150mm Weight approx. 2700 kg Space requirement L 2350 x W 1400 x H 1800 mm Control cabinet 1200 mm x 420 mm x H 1050 mm

Number of spindles: 7 St.Working width: min. 18 - 230 max. mmWorking height: min. 8 - 150 max. mmLength of the planing table: 2000 mmFeed motor: 7,5 kWFeed speed: 7-36 m/min.Kuper planer and moulder SWT 23 XLS-7------------------------------------------------------Machine still in use and can be viewedFurnishing:7 spindles each with 7.5 kW motor 40mm diameterWorking width: max. 230 mm, min. 18 mmWorking height: max. 150 mm, min. 8 mmFeed table: 2,000 mmSpindle arrangement:1. Spindle down, 6,200 rpm2. Spindle right, 6,200 rpm, axial NC controlled3. Spindle on the left, 8,000 rpm, axially and radially NC controlled4. Spindle right, 8,000 rpm5. Top spindle, 6,200 rpm, axially and radially NC controlled6. Top spindle, 8,000 rpm, axially and radially NC controlled7. Spindle down, 8,000 rpmSiemens PLC control large touch displayFeed motor 7.5 KW speed 7-36 m/minHeight adjustment electrically v ...

CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900  ...

Working width: 630 mmWorking height: 3-310 mmMotor output: 7,5 kWNumber of knives: 4-TERSA St.Feed speed: 6-20 m/min.Vertikal stroke: elektrisch FIMAL thickness planer type SP 63 A-----------------------------------------------------NEW MACHINE Partnership EditionTechnical specifications:-----------------------------------------------------Wo rking width: 630 mm4-knife cutterblock system TERSA, d=120mm: 4,800 rpmmax. chip removal planer according to CE: 8 mmmin./max. Thickness passage: 3/310 mmMinimum workpiece length: 250 mmFeed speed: infinitely variable 6 - 20 m/min.Motor 380 Volt / 50 Hz.: 7.5 kW withmanual star-delta switchSound level according to EN 27960: 86 - 90 dB(A)basic equipment:Thicknessing table adjustment via 4 trapezoidal thread spindlesElectromotive thicknessing table lift with electronicpositioning deviceElectronics according to CE standard Magnetic brakecircuit breaker ...

CATALOG NUMBER 6651 TECHNICAL DATA - max width of the workpiece 220mm - max height of the workpiece 120mm - 4 spindles: 1) horizontal bottom 220mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal upper 220mm 5.5kW - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - from above, 4 introducing rollers, toothed, including 2 double ones - from above, 1 pulling roller, smooth, rubber - rubber, pulling roller at the bottom - pneumatically pressed rollers - feed on cardan shafts - 1.1kW feed motor - 0.37kW lifting motor - electric adjustment of the planing thickness - length of the introductory top 1980mm - side pressure - smooth adjustment of the feed speed 8-16m / min - central lubrication - diameter of the extraction port 5x140mm - locked in the cabin - dimensions length / width / height 3400x1500x1700mm - wei ...

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled------------------------------------------------------------ -----------Short summary:-------------------------------------------------------------- ---------6 spindles with 8,000 rpm5 x HSK/PowerlockAxial and radial CNC adjustment of the spindles via controlCNC - controlled adjustment and positioning of the feedDetailed description:---------------------------------------------------------- -------------Technical specifications:Working width: 20-230 mmWorking height: 8-120 mmNumber of spindles: 61. Tool holder - below------------------------------------------------Motor with brake: 5.5 kWSpindle diameter: 40mmSpeed: 6,000 rpmTool flight circle: 93 - 160 mmAxial adjustment range: 5  ...